The Analysis of Galvanizing Preflux Solutions for Zinc by Flow Injection-Flame Atomic Absorption Spectrometry

Abstract

A direct flow injection flame atomic absorption spectrometry method of determining zinc salt solutions with concentrations of 100's g dm^?3 is reported. It was shown that high concentrations of KCl, NaCl and NH₄Cl do not significantly interfere with the determination of zinc in both the mg dm^?3 and g dm^?3 concentration ranges. Where g dm^?3 concentrations were determined a secondary spectral line at 307.6 nm was found satisfactory. Galvanizing preflux solutions were analyzed both after dilution to the mg dm^?3 range at 213.9 nm and directly injected at 307.6 nm. Precisions of better than 6.6% rsd were observed by the direct method compared with better than 4.8 by dilution techniques. Concentrations up to 110 g dm^?3 in zinc were determined the total salt content being greater than 300 g dm^?3.     

Direct Determination of Glucose in Blood Serum Using Trinder's Reaction

Abstract

A very simple flow injection analysis system for direct determination of glucose in blood serum based on Trinder's reaction is described. The sera samples (15 μl) can be injected directly to the system without the deproteinization or the use of a dialyzer.

Calibration curves are linear in the range 50–400 mg/dl. The sampling frequency is 60 samples per hour. Results obtained by the proposed procedure are compared with those acquired at a local hospital using their routine glucose procedure also based on Trinder's reaction. It is shown that a better mix between sample and reagents is achieved using the single bead string reactor (SBSR).     

Flow Injection Amperometric Determination of Hydrogen Peroxide at Low Level in Aqueous Solution

Abstract

A method is proposed for the flow-injection amperometric determination of hydrogen peroxide. Iodine is generated, by injecting hydrogen peroxide solution into an eluent 0.2 M in potassium iodide and 1 Min sulphuric acid and 5×10^?3M in Mo(VI) and is monitored at a platinum electrode that is being held at 0.1 V versus SCE. the rectilinearity range is from 10^?3?10^?6 M and the method is simple, accurate and compared favourably with the titrimetric method involving starch as indicator.     

Determination of Riboflavin Using Flow Injection Inhibitory Chemiluminescence

ABSTRACT

A new flow injection method for the determination of riboflavin based on the inhibition of the intensity of chemiluminescence (CL) from the luminol-K₃Fe(CN)₆ system is described. While riboflavin mixed with K₃Fe(CN)₆, by the fast oxidation reaction between riboflavin and K₃Fe(CN)₆, K₄Fe(CN)₆ was generated, which then inhibited the CL reaction of K₃Fe(CN)₆ and luminol in alkaline aqueous solution. The CL emission was correlated with the riboflavin concentration in the range from 0.032 to 100 μg·ml?¹, and the detection limit was 0.01 μg·ml?¹ (3σ). A complete analysis could be performed in 2 min with a relative standard deviation of less than 2.2%. The influence of foreign species was studied and the method has been applied successfully to the determination of riboflavin in pharmaceutical samples, the recovery was from 98.0% to 102%.     

Ⅰ型拉伸试样金属注射成形多相流动的三维数值模拟

将粉末注射成形充模过程视为粘结剂、粉末和空气的三相流动过程,基于多相流理论给出金属注射成形的多相流动控制方程。根据金属注射成形的工艺特点确定多相流动控制方程的初边界条件,用多相流数值分析软件CFX对Ⅰ型拉伸试样的铁粉注射成形充模流动过程实现了三维数值模拟,分析了模腔中不同位置处粘结剂一粉末流动的速度曲线。数值模拟结果表明在Ⅰ型拉伸试样金属注射成形充模流动过程中发生过两相分离的现象,数值模拟的瞬态信息可用于金属注射成形产品缺陷的分析与控制。     

An anisotropic rotary diffusion model for fiber orientation in short- and long-fiber thermoplastics

The Folgar–Tucker model, which is widely-used to predict fiber orientation in injection-molded composites, accounts for fiber–fiber interactions using isotropic rotary diffusion. However, this model does not match all aspects of experimental fiber orientation data, especially for composites with long discontinuous fibers. This paper develops a fiber orientation model that incorporates anisotropic rotary diffusion. From kinetic theory we derive the evolution equation for the second-order orientation tensor, correcting some errors in earlier treatments. The diffusivity is assumed to depend on a second-order space tensor, which is taken to be a function of the orientation state and the rate of deformation. Model parameters are selected by matching the experimental steady-state orientation in simple shear flow, and by requiring stable steady states and physically realizable solutions. Also, concentrated fiber suspensions align more slowly with respect to strain than models based on Jeffery's equation, and we incorporate this behavior in an objective way. The final model is suitable for use in mold filling and other flow simulations, and it gives improved predictions of fiber orientation for injection molded long-fiber composites.     

平面液体层碎裂过程实验研究

小宽厚比喷嘴喷射出的平面水膜进入静止空气中,在不同气流流速环境下对水膜碎裂过程进行了实验研究。结果表明,静止空气中的水膜表面波呈现对称波形,射流的碎裂长度随雷诺数的增大而增大,喷射压力对射流碎裂长度没有直接影响。空气助力作用使平面射流表面波的上、下气液交界面出现相位差。水膜的碎裂长度随空气助力气流速度的增大而减小;空气助力对于低雷诺数水膜射流具有很强的促进碎裂作用,所以会极大地改善低雷诺数射流的一次雾化效果。随着水流雷诺数的提高,空气助力作用对水膜碎裂长度的影响大为减弱;即使在高速助力空气的作用下,水膜仍长期保持较稳定的射流流态,没有出现明显的水膜撕裂现象。说明在小宽厚比喷嘴的瑞利(Rayleigh)模式射流中,高雷诺数射流是水膜的稳定因素。与气液流速比、气流马赫数等无量纲参数相比,液体喷射的雷诺数是射流碎裂的主要影响因素。     

停流流动注射-化学发光法测定碘盐中的碘酸根

基于在酸性介质中 ,IO-3 与 I-快速反应产生 I2 ,I2 氧化 Luminol产生化学发光反应的机理 ,建立了Luminol- IO-3 偶合发光体系测定微量 IO-3 的方法。本法测定 IO-3 的线性范围为 5 .0× 10 -8- 3.0× 10 -5g/m L;检出限为 5 .0× 10 -8g/m L ;该法中的采样、停流和进样都由计算机自动控制 ,操作简便 ,灵敏度高 ,选择性好。应用于含碘食盐中微量 IO-3 的测定 ,结果令人满意     

A combined analytical singularity subtraction method and compact implicit differencing scheme for aerodynamic mixing

In spite of the rapid advances in both scalar and parallel computational tools, the large number and breadth of variables involved in both design and inverse problems make the use of sophisticated fluid flow models impractical. With this restriction, it may be concluded that an important family of methods for mathematical/computational development are reduced or approximate models. In this study, a combined perturbation/numerical modeling methodology is developed. The numerical portion of the model uses a compact finite difference scheme, while analytical solutions are used to resolve singular behavior that is inherent to this flow. Solutions are presented to illustrate the efficiency of this methodology.     

Experimental evaluation of side-loads in LE-7A prototype engine nozzle

During development tests of the LE-7A prototype engine, severe side-loads were observed. The side-load peaks appeared only in certain limited conditions during start-up and shut-down transients. To investigate phenomena causing those severe side-loads observed in the LE-7A prototype engine nozzle, series of cold-flow tests and hot-firing tests as well as CFD analyses were conducted. As a result of the hot-firing tests, two different phenomena were found to cause severe side-loads in the LE-7A prototype engine nozzle. One was a restricted shock separation (RSS) flow structure and the other was a phenomenon termed “separation jump,” the rapid movement of the separation location in the vicinity of the step. A step was installed in the LE-7A prototype to supply film-cooling gas. Hot-firing test results showed that RSS can occur for a limited mixture ratio. Detailed flow structure of RSS on the nozzle surface was revealed by the cold-flow tests. Measured pressures and visualized images of cold-flow tests clarified the mechanism causing the separation jump. The key phenomenon ruling the separation jump was found to be the base flow behind the step. Based on the results of the present study, the latest LE-7A engine nozzle design has been changed to eliminate the severe side-load.

---