The aberration theory of a combined electron focusing–deflection system with a rotating deflection field following the rotation of the electrons

A new type of combined magnetic focusing–electrostatic deflection systems whose orientation of deflection field is rotated synchronously with the beam electrons is proposed. This rotation deflection field can be formed by twistification of tube wall electrode (TWE) deflectors. Formulae are derived for the first-order optical properties, third-order geometrical aberrations and first-order chromatic aberrations of this system. A program was written in FORTRAN for numerical computation. An example is given; the computation results show that compared to the conventional systems, the proposed new system has lower deflection aberration coefficients.     

HL-1M装置真空室硅化的研究

GDC（He SiH4）是为HL－1M装置研制的一种常规壁处理技术。在He辉光等离子体条件下,通过气相中的电子碰撞离解、电离、离子－分子反应和在壁面上的He^ 诱导脱H2过程,在清洁的真空壁表面沉积一层无定形、半透明、致密的氢化硅（α－Si:H）薄膜。氢化硅具有良好的H（D）捕获、H2（D2）释放,能显著地降低再循环系数,有效地控制杂质水平,大大拓宽了HL－1M装置的运行范围,为HL－1M装置的LHCD、ICRH、ECRH、NBI、PI和MBI实验提供了良好的真空壁条件。     

Compressed exponential form for disordered domain wall motion in ultra-thin Au/Co/Au ferromagnetic films

Magnetization reversal in ultra-thin Au/Co/Au films deposited on single crystal silicon (1 0 0) was investigated using Kerr microscopy. In the considered ultra-thin Co films, with a thickness between 0.7 and 1 nm, the coercivity and magnetic anisotropy decrease with decrease in cobalt layer thickness and the magnetization reversal dynamics is dominated by disordered domain wall motion. An analysis of the observed magnetization reversal dynamics is proposed, starting from the Fatuzzo-Labrune model. We show that the relaxation curves of these samples are well described by a function obtained by a technical transformation of Fatuzzo-Labrune model in the regime dominated by domain wall motion.     

LES of spatially developing turbulent boundary layer over a concave surface

We revisit the problem of a spatially developing turbulent boundary layer over a concave surface. Unlike previous investigations, we simulate the combined effects of streamline curvature as well as curvature-induced pressure gradients on the turbulence. Our focus is on investigating the response of the turbulent boundary layer to the sudden onset of curvature and the destabilising influence of concave surface in the presence of pressure gradients. This is of interest for evaluating the turbulence closure models. At the beginning of the curve, the momentum thickness Reynolds number is 1520 and the ratio of the boundary layer thickness to the radius of curvature is δ₀/R = 0.055. The radial profiles of the mean velocity and turbulence statistics at different locations along the concave surface are presented. Our recently proposed curvature-corrected Reynolds Averaged Navier-Stokes (RANS) model is assessed in an a posteriori sense and the improvements obtained over the base model are reported. From the large Eddy simulation (LES) results, it was found that the maximum influence of concave curvature is on the wall-normal component of the Reynolds stress. The budgets of wall-normal Reynolds stress also confirmed this observation. At the onset of curvature, the effect of adverse pressure gradient is found to be predominant. This decreases the skin friction levels below that in the flat section.     

Magnetic properties of the Cr(0 0 1) surface studied by spin-polarized scanning tunneling spectroscopy

The magnetic properties of the Cr(0 0 1) surface have been studied by spin-polarized scanning tunneling spectroscopy (SP-STS). Spatially resolved mapping of the spectroscopic dI/dU signal at an energy close to the spin-polarized Cr(0 0 1) surface state allows the confirmation of the topological antiferromagnetic order of the Cr(0 0 1) surface. It is shown that the presence of screw dislocations leads to the formation of domain walls which exhibit a width of 120–170 nm. A long-period modulation of the SP-STS signal was not observed indicating that the bulk spin-density wave is modified at the surface due to symmetry breaking.     

静态球对称黑洞Dirac场的统计熵

利用改进的brickwall模型,给出了一类静态球对称黑洞Dirac场的熵,结果表明,在取相同的截断因子时,Dirac场的熵均为标量场的熵的72倍 关键词： 黑洞 统计熵 brickwall模型 Dirac场     

一般球对称带电蒸发黑洞的熵

从一般球对称带电蒸发黑洞的时空线元和零曲面方程出发,得到了该黑洞的视界;利用KleinGordon方程求得波数,进而采用WenzelKramersBrillouin近似方法和薄膜brickwall模型,求出了一般球对称带电蒸发黑洞的熵,所得的熵正好与该黑洞的视界面积成正比 关键词： 黑洞 KleinGordon方程 熵 薄膜brickwall模型 视界     

基于超声分子束和普通充气的聚变等离子体密度反馈实验研究

本文介绍了全超导托卡马克装置EAST实验中等离子体密度反馈的方法和结果. EAST密度反馈采用普通充气 (gas puffing) 和超声分子束 (supersonic molecule beam injection, SMBI) 在放电过程中反馈进气, 获得稳定、预期的等离子体密度. 典型的一天放电实验中, 每次放电的充气量和壁滞留的变化可分为两个阶段: 第一阶段为初始约20次放电, 该阶段充气量非常高且呈指数趋势下降, 粒子滞留率为80%–90%, 壁滞留迅速上升. 第二阶段为随后的约50次放电, 该阶段充气量较小且保持稳定, 粒子滞留率为50%–70%, 壁滞留缓慢上升. SMBI的加料效率为15%–30%, 延迟时间小于5 ms. 因此使用SMBI 进行密度反馈效果优于gas puffing反馈, 相同条件下前者充气量较后者减少了～ 30%, 壁滞留减少了～ 40%, 再循环系数也相应减少. gas puffing反馈时, 采用脉宽调制模式效果优于脉幅调制模式. SMBI密度反馈可以作为未来EAST长脉冲高参数放电的主要手段之一. 关键词： 密度反馈 超声分子束 再循环 壁滞留     

脉冲敲击技术对PI微球表面粗糙度的影响

作为点火靶重要候选靶丸之一, 聚酰亚胺 (PI) 空心微球采用降解芯轴技术结合双单体气相沉积聚合法 (VDP) 制备. 在PI涂层过程中微球碰撞对表面质量影响较大, 为了减小碰撞提高表面质量, 选用筛网盘做样品盘, 激励方式由压电振动模式改为脉冲敲击模式进行对比. 实验数据表明微球运动过程中碰撞是引起表面质量变差的原因, 通过理论分析确认了筛网盘通过减少接触点可以减少微球与微球间、微球与样品盘间的碰撞, 并且将压电振动改为脉冲敲击模式可以减小微球碰撞次数. 脉冲敲击模式与压电振动模式相比, 其可控性、微球弹跳幅度、消除静电等方面均优于压电振动. 对于微球壁厚均匀性而言, 压电振动略好于脉冲敲击, 但相差较小. 单个微球的壁厚最大偏差前者为0.68 μm, 优于后者的0.73 μm; 单个微球壁厚平均值在同一批次内的最大起伏, 前者为0.26 μm, 优于后者0.57 μm. 白光干涉仪数据显示脉冲敲击起到了提高微球表面质量的作用, 其表面粗糙度Rq值由52–93 nm 减小到28–44 nm. 关键词： 脉冲敲击技术 聚酰亚胺靶丸 表面粗糙度 壁厚均匀性