激光等离子体的电子温度对Thomson散射离子声波双峰的影响

通过对不同激光条件产生的等离子体进行Thomson散射实验诊断，发现在距靶面为150 μm的临界密度面内，离子声波双峰强度出现明显的不对称性，而且强峰的位置发生了转移：当等离子体的电子温度较高时，强峰出现在短波方向；当等离子体电子温度较低时，强峰出现在长波方向.光的拉曼散射效应对应地解释了离子声波的双峰结构、双峰强度不对称性及强峰出现的位置.建立了光的拉曼散射与电子的Thomson散射的对应关系.     

用于X射线时空分辨测量的弯晶谱仪

为了测量激光聚变产生的0.2～0.37 nm范围内的等离子体X射线, 设计了一种基于空间和时间分辨的聚焦型弯晶谱仪. 将在700℃时弯曲后的LiF(2d＝0.403 nm)晶体作为色散元件, 布喇格衍射角的变化范围为30～67.5°, 弯晶粘贴在离心率和焦距分别为0.9586和1350 mm的椭圆形不锈钢基底上. 利用弯晶谱仪配X光CCD相机在星光Ⅱ激光(0.35 μm, 60～80J, 700 ps)装置上摄取了钛平面靶发射的X射线光谱, 实验结果表明它的光谱分辨率能达到0.001 nm.     

The simulation of infrared bands from the analyses of rotational spectra: the 2ν9-ν9 and ν5-ν9 hot bands of HNO3

The results of millimeter and submillimeter wave rotational spectroscopy are used to simulate the complex structure of the 2ν₉-ν₉ and ν₅-ν₉ hot bands. The comparison data were obtained with a high-resolution Bruker FTIR. The combination of the quality of these data and the complexity of the spectra of these interacting states represents a stringent test for the simulation. It is shown that the agreement is very good and that this approach is generally advantageous. From this simulation, the ratios of the transition dipole moments for the 2ν₉-ν₉ and ν₅-ν₉ hot bands with respect to the ν₉ fundamental band were found to be 1.38(11) and 0.67(20), respectively. Using these results, the calculated integrated band intensities for the hot bands at were determined to be and . These results were used to successfully simulate high-resolution stratospheric spectra obtained from a balloon flight of the FIRS-2 spectrometer. The more general problem of the rotation-vibration database and the optimal use of both microwave and infrared data to define it is discussed. It is concluded that it is best if the combination of data takes place at the level of the original spectra.     

Optical emission behaviors of C,Al, Ti,Fe, Cu,Mo, Ag,Ta, and W wire explosions in gaseous media

Electrical explosion of wires (EEW) is a promising method for nanopowders preparation and insensitive explosives ignition. Plasma radiation plays a key role in the ignition process while little attention has been paid on this phenomenon before. This letter introduces optical emission behaviors of electrical explosions for nine materials in air, Helium, and Argon with the SWE-2 platform. Experimental results indicated that the light intensity for non-refractory metals decayed rapidly after the discharge ended. In contrast, for refractory metals, the emission continued to increase and lasted for a long period after the discharge ceased. As for spectra, the emission consisted of line and continuous spectra. With the atomic number increased, the density of lines grew rapidly, leading to a “continuous” appearance.     

过渡层厚度对Be/CuCrZr热等静压连接性能影响

在铍上用物理气相沉积(PVD)镀上10μmTi 和10μmCu,再添加不同厚度的(分别为0.00mm、0.25mm、 0.50mm、0.75mm、1.00mm)无氧铜作为中间过渡层,与CuCrZr/316L(N)复合板基座铜合金侧通过热等静压连接。采用光学显微镜、扫描电镜(SEM)与电子探针(EPMA)、X 射线衍射仪(XRD)、剪切试验等方法确定了界面组织与性能。试验结果表明：各厚度无氧铜模块连接成功,界面无裂纹、空洞等缺陷,钛铜间出现三层明显的反应层,分别为CuTi₂、CuTi 以及Cu₄Ti。添加无氧铜厚度越大,剪切强度越大。     

退火对钛/铜热等静压扩散连接界面的影响

钛/铜(Ti/Cu)作为ITER 第一壁Be/CuCrZr 热等静压连接中间过渡层,形成了多层中间金属相结构,容易在Ti/Cu 金属相之间产生裂纹等缺陷。采用CuCrZr 代替Be,经过与Be/CuCrZr 相同的热等静压工艺,制作了多个CuCrZr/Ti/Cu/CuCrZr 连接件,对Ti/Cu 连接接头进行深入分析。对连接件分别进行未退火、400℃和500℃ 退火处理,去应力退火后对接头强度和缺陷分布的影响进行了研究。研究结果表明,中间钛层的两侧都形成了三层Ti/Cu 扩散层,分别为Cu₄Ti、CuTi 和CuTi₂。纯铜侧的Cu₄Ti 厚度比CuCrZr 侧的厚,使得裂纹几乎全部分布于铜侧的Cu₄Ti 与CuTi 交界处,拉伸样品极易在此处发生脆性断裂。随着退火温度升高,裂纹的产生和扩展减少。     

ITERУ������Ȧ��ͷȥ���������������о�

分别采用机械打磨去镍加热镀锡工艺和反电镀去镍加电刷镀银工艺制作一对接头,然后对接头进行低温直流测试,测得前者的直流电阻为1.98n-,后者的直流电阻为1.53n-。对比分析可知,反电镀去镍和电镀银工艺更有效、更简单。这些工艺研究对ITER校正场线圈超导接头的制作具有重要指导意义。     

Development and characterisation of an XeCl excimer laser-generated soft-X-ray plasma source and its applications

Summary A large-aperture, long-pulse XeCl excimer laser has been used to generate a soft-X-ray plasma source. Several laser optical configurations have been employed to optimise X-ray emission, including positive-branch unstable resonators and injection by seeding the gain region of the laser with a small commercial excimer laser, resulting in power densities in the range 10¹²–10¹⁴ W cm⁻². The characteristics of the plasma source for each different laser configuration and for different target materials are investigated. The most suitable source conditions (spectral energy distribution, time duration, etc.) for specific applications are discussed. Supported by the Royal Society, UK. Supported by INFM, Italy.     

Velocity distributions in glottal models

Velocity distributions within three models of the human larynx, namely, a rigid plexiglas model, an excised canine larynx, and a computational model are investigated with experimental and theoretical analyses. A plexiglas wind tunnel with interchangeable glottal constrictions was used as a two-dimensional steady-flow model to measure velocity and pressure for various glottal shapes. A canine excised larynx was used as a prototype pulsatile flow model to study pressure and velocity variations during phonation. Results of the plexiglas modelling indicated a parabolic laminar velocity profile upstream of the glottal constriction and turbulent and asymmetric velocity profiles downstream of the glottal constriction. The time-averaged velocities of the excised larynx had similarities with the plexiglas model results, and instabilities and asymmetries were also demonstrated by the computational method.     

我国等离子体工艺研究进展

扼要综述了我国等离子体材料工艺研究的新近进展。内容包括：热等离子体源,等离子冶金、化工,超细粉合成,喷涂;低气压非平衡等离子体源,镀膜,表面改性,等离子浸没离子注入,电晕放电,介质阻挡放电,滑动弧等及其应用,当前,各类薄膜制备和表面改性的研究工作更为活跃。