条形码技术的国际发展趋势及我国的对策

介绍了供应链管理中的一个得力工具——条形码技术，对这一技术进行了剖析，分析了条形码技术的国际发展趋势以及在我国的应用现状，最后针对我国在实现条形码技术时所遇到的各种问题提出了一些建议。     

Determination of contact stresses in problems on bending of a package of transversely isotropic bars

A mechanomathematical model for bending of packages of transversely isotropic bars of rectangular cross section is proposed. Adhesion, slippage, and separation zones between the bars are considered. The resolving equations for deflections and tangential displacements are supplemented with a system of linear differential equations for determining the normal and tangential contact stresses, and boundary conditions are formulated. A scheme for analytical solution of two contact problems—a package under the action of a distributed load and a round stamp—is considered. For these packages, a transition is performed from the initial system of differential equations for determining the contact stresses, where the unknown functions are interrelated by recurrent relationships, to one linear differential equation of fourth order and then to a system of linear algebraic equations. This transition allows us to integrate the initial system and get expressions for the contact stresses.Translated from Mekhanika Kompozitnykh Materialov, Vol. 40, No. 6, pp. 761–778, November–December, 2004.     

A 3D-BPP approach for optimising stowage plans and terminal productivity

This paper addresses the problem of determining stowage plans for containers in a ship, that is the so-called master bay plan problem (MBPP).     

直线加速器驻波腔中的瞬态束流负载效应

在高能加速器中, 随着单个束团和束团串中电荷量的提高, 当粒子束穿过加速腔的时候, 感应出的瞬态束流负载电压也越来越高. 但是, 在通常分析束流负载的时候, 往往对稳态束流负载研究的比较多, 而对瞬态束流负载的研究要相对少一些. 本文首先对束流负载的瞬态特性和束团穿过加速腔时高频源所看到谐振腔谐振频率的变化方式进行了分析, 然后又对两种情况下谐振腔的最优失谐条件进行了讨论, 并给出了相应的解析公式. 在第1种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率能够及时地得到调节, 从而使高频源的电流与谐振腔的腔压同相, 以提高高频源的效率; 在第2种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率保持不变, 不能被调节. 最后, 还对BEPCⅡ现有预注入器的预聚束腔、BEPCⅡ未来预注入器的两个次谐波聚束腔中的瞬态束流负载效应进行了分析.     

金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

稀土离子(Gd3+,Eu3+)加载于纳米介孔ZrO2中的发光

水热合成法制备的高度有序多孔ZrO2具有规则六角排列，均匀纳米孔洞（约1．8nm)，丰富的表面，界面态及比表面积和强的蓝－（近）紫外光发射，使其较常规体材料有更优异的性质，以稀土离子为探针，研究了Gd^3 ,Eu^3 在这些纳米微孔中的发光行为，结果表明，500摄氏度下，介孔ZrO2与稀土离子相作用并有效地将能量传递给稀土离子，增进稀土离子发光，而在ZrO2:Gd-Eu体系中，Gd^3 在ZrO2与Eu3 间起桥梁作用，使基质ZrO2→Eu^3 的能量传递更为有效。     

Determination of the Insect Repellent Bayrepel® in Pool and Lake Water by Gas Chromatography after Preconcentration with Solid-Phase Extraction and Stir-Bar-Sorptive Extraction

A method for the determination of the new insect repellent Bayrepel in bathing lakes and public pools is presented. Sample preconcentration is performed either by solid-phase extraction (SPE) or stir bar sorptive extraction (SBSE). Analysis of the enriched analyte using gas chromatography-mass spectrometry (GC-MS) led to almost identical limits of detection (LOD) of 25ngL^–1 for Bayrepel with both extraction methods. Because of the slightly reduced handling effort involved, the method based on preconcentration by SBSE was finally chosen for the analysis of real samples.     

Optimisation of stir bar sorptive extraction for the analysis of volatile phenols in wines

An easy, fast and reliable analytical method is proposed for the determination of the concentration of volatile phenols (ethyl- and vinylphenols) in wines. The novel stir bar sorptive extraction (SBSE) technique is employed, following a simple and fast procedure that allows 15 samples to be extracted simultaneously using very small sample volume. Extracts are desorbed in a thermodesorption system (TDS) coupled on-line to a gas chromatograph-mass spectrometry system. The SBSE offers better recovery and linear regression coefficient (r2) for the four volatile phenols than solid-phase extraction (SPE). The mass spectrometric detection in selected ion monitoring mode contributes to the lower detection limit and good sensibility obtained with this method.     

Synthesis and Investigation of Soluble Polymer-supported Dendrimers

Poly（ethylene glycol） （PEG）-supported dendrimers have been synthesized using 2.4,6-trichloro-1,3,5-triazine （TCT） as dendrons and tris（hydroxymethyl）aminomethane as tinkers with high loading capacity, excellent solubility and thermal stability by divergent method. The new synthesized PEG-supported G2.0 dendrimer has 10 times as large functional group loading capacity as commercial PEG3400 with overall yield 44.0%.