In situ friction study of Ag Underpotential deposition (UPD) on Au(111) in aqueous electrolyte

The electrodeposition of silver on Au(111) was investigated using lateral force microscopy (LFM) in Ag⁺ containing sulfuric acid. Friction force images show that adsorbed sulfate forms structure ( on Au(111) prior to Ag underpotential deposition (UPD) and structure ( ) on a complete monolayer or bilayer of Ag. Variation of friction with normal load shows a non-monotonous dependence, which is caused by increasing penetration of the tip into the sulfate adlayer. In addition, the friction force is influenced by the varying coverage and mobility of Ag atoms on the surface. Before Ag coverage reaches the critical value, the deposited silver atoms may be mobile enough to be dragged by the movement of AFM tip. Possible penetration of the tip into the UPD layer at very high loads is discussed as a model for self-healing wear. However, when the coverage of Ag is close to 1, the deposited Ag atoms are tight enough to resist the influence of the AFM tip and the tip penetrates only into the sulfate adlayer.     

Effects of atomic oxygen irradiation on structural and tribological properties of polyimide/Al2O3 composites

To understand the effects of atomic oxygen (AO) irradiation on the structural and tribological behaviors of polymer composites, polyimide/Al₂O₃ composites were irradiated with AO in a ground‐based simulation facility. The structural changes were characterized by X‐ray photoelectron spectroscopy and attenuated total‐reflection FTIR, whereas the tribological changes were evaluated by friction and wear tests as well as scanning electron microscopy analysis of the worn surfaces. It was found that AO irradiation induced the oxidation and degradation of polyimide molecular chains, which increased the O concentration and decreased the C concentration in the composite surfaces. The destruction action of AO changed the surface chemical structure and morphology of the samples. Friction and wear tests indicated that AO irradiation decreased the friction coefficient but increased the wear rate of both pure and Al₂O₃ filled polyimides. In terms of the tribological properties, appropriate content of Al₂O₃ might be favorable for the improvement of tribological properties in AO environment. Copyright © 2011 John Wiley & Sons, Ltd.     

A parametric investigation of the friction performance of PC‐ABS parts processed by FDM additive manufacturing process

The friction performance is an important factor of parts processed by fused deposition modeling (FDM) for various engineering applications. It is one type of failure made of surface contact. The proper use of FDM process parameters can bring a significant reduction in friction and the amount of wear, thereby leading to a reduction in the material waste. To date, very little studies have been performed in this area. This paper investigates the effect of FDM manufacturing parameters on the friction performance of polycarbonate‐acrylonitrile butadiene styrene prototypes processed by FDM using definitive screening design and partial least squares method. The observation of surface morphology was obtained by the scanning electron microscopy to examine the effect of process parameters on the microstructure. The experimental results have shown that layer thickness, air gap, raster angle, and build orientation are the most influential factors affecting the friction performance of FDM manufactured parts. The proposed approach presented in this study provides an impetus to develop analytical modeling and functional relationships between FDM manufacturing parameters and friction performance. Copyright © 2017 John Wiley & Sons, Ltd.     

On the penetration of a rotating impactor into an elastic-plastic medium

This research is devoted to the modeling of high-speed rectilinear penetration of a rigid axisymmetric body (impactor with a flat bluntness) into an elastic–plastic media with account for its rotation about the axis of symmetry. The body has an arbitrary shape of the meridian. The resistance to the motion is represented as the sum of the body drag and the contribution of friction. The dynamic system governing the body motion is derived and the qualitative and numerical analysis of the projectile movement and perforation of a slab are performed. The problem of shape optimization of impactor with a flat bluntness is studied using evolutionary algorithm.     

Finite-element modelling of soil-geogrid interaction dealing with the pullout behaviour of geogrids

A two dimensional plane-stress finite-element type of analysis is presented to predict the behaviour of geogrids embedded in sand under pullout loading conditions. In the analysis the interactions between soil and geogrid are simulated by non-linear springs. The stiffnesses of the springs can be determined from simple tests in a specially designed pullout box. The proposed finite element (FE) analysis is applied to interpret test results from a large scale pullout test rig. The predicted behaviour of the geogrid under pullout load agrees well with the observed data including the load-displacement properties, the displacement distribution along the longitudinal direction and the mobilisation of the frictional and bearing resistance.     

Ermittlung von Fließkurven in verschiedenen Ausführungsformen des Stauchversuches

Several modifications of the upsetting test at room temperature are discussed under the aspect of suppressing friction and other possible sources of error.In the upsetting test according to Rastegaev, friction is reduced, and the testpiece remains cylindrical up to high strains, however the specimen's height is determined with a large error. Therefore it is proposed to measure the increase of the specimen's diameter instead of the reduction of height.Upsetting under sticking friction conditions can formally be treated like upsetting with lubrication for calculating the stress-strain curve. However, the applicability and the limits of this method have not yet been studied sufficiently.In the plane-strain upsetting test, friction is not suppressed completely, but the error of height measurement propagates only weakly into the calculated stress-strain curve.

     

Oil spill identification by high-speed HPLC

The use of high-speed HPLC in oil spill identification problems has been evaluated in terms of analysis time and reliability. The aromatic fraction was analyzed by reverse-phase chromatography on a 3 μm packing, with detection at 210 and 287 nm, in less than 20 minutes. The profiles exhibited by several Spanish and Middle East crude oils were differentiated by simple statistical parameters. The effect of environmental weathering on the samples has also been investigated. An Arabian light crude oil was still identifiable after four months' simulated marine weathering.     

Elastic constants of lead-bismuth alloys

A study of ultrasonic velocities and internal friction has been carried out in Pb-Bi alloys in the concentration range of 0 to 49.5 atomic % Bi using the composite oscillator technique. From the velocity and density data a set of elastic constants namely, Young’s modulus, rigidity modulus, bulk modulus and Poisson’s ratio are estimated. The results are interpreted in terms of the phase changes occurring in the alloy system. Internal friction is found to be more sensitive than the elastic constants to the phase changes.     

Study on the lifetime and attenuation properties of microbubbles coated with carboxylic acid salts

Four kinds of surfactants, sodium laurate, sodium myristate, sodium palmitate and sodium oleate were used to study the effects of surfactant coatings on the lifetime and attenuation of microbubbles. The changes in the size distribution of microbubbles prepared with these surfactants in saline were measured with a Coulter Multisizer (Coulter Electronics Ltd., Luton, UK). Frequency characteristics of ultrasonic attenuation of the microbubble suspensions were measured between 400 kHz and 6 MHz. From the changes in attenuation in the microbubble suspensions over time, it was found that the lifetime of microbubbles in a suspension also depends on the frequency of the irradiating ultrasound. The effect of surfactants on the frequency characteristics of attenuation was also studied, and characteristics of the surfactant coating, including shell elasticity and shell friction parameters were calculated from the measurement results. Microbubbles produced with sodium palmitate had the longest lifetime and the smallest average size. The shell had very little effect on the ultrasonic properties of microbubbles produced with sodium palmitate, suggesting that the sodium palmitate microbubbles behaved ultrasonically as free microbubbles.     

Detailed investigation of ignition by hot gas jets

Experimental and numerical investigations of the ignition of hydrogen/air mixtures by jets of hot exhaust gases are reported. An experimental realisation of such an ignition process, where a jet of hot exhaust gas impinges through a narrow nozzle into a quiescent hydrogen/air mixture, possibly initiating ignition and combustion, is studied. High-speed laser-induced fluorescence (LIF) image sequences of the hydroxyl radical (OH) and laser Schlieren methods are used to gain information about the spatial and temporal evolution of the ignition process. Recording temporally resolved pressure traces yields information about ambient conditions for the process. Numerical experiments are performed that allow linking these observables to certain characteristic states of the gas mixture. The outcome of numerical modelling and experiments indicates the important influence of the hot jet temperature and speed of mixing between the hot and cold gases on the ignition process. The results show the quenching of the flame inside the nozzle and the subsequent ignition of the mixture by the hot exhaust jet. These detailed examinations of the ignition process improve the knowledge concerning flame transmission out of electrical equipment of the type of protection flameproof enclosure.