方形自聚焦透镜的研制

经过方形玻璃丝的加工、离子交换及成品的精密加工等过程,成功制出了方形自聚焦透镜.并采用聚焦成像和雅明干涉等方法对其光学特性进行测试,得出了方形自聚焦透镜本身所具有的一些特性：中心部分畸变较小,成像性能好;四个棱角内的球差较大,像质较差;折射率分布不具有旋转对称性,而是与方向和半径有关.     

增强型喷射器对爆轰波DDT过程的影响

在激波、火焰及射流同时存在的流场中,组织燃烧转爆轰过程是脉冲爆震发动机实现点火、起爆的关键问题。设计一类喷射器,采用C_2H_2/O_2/Ar反应,数值验证了该喷射器能增强爆震室燃料燃烧转爆轰的可行性,并讨论了流场中热点的点火机制。结果显示:该装置在流场中可激发不稳定性,产生漩涡,加速能量、质量的交换。流场产生热点,促进火焰速度加快,追赶前导激波。喷射器位置影响前导激波的运动速度。在一定范围内,前导激波速度越大,碰撞产生的热点越容易激发燃烧转爆轰过程。     

考虑塑性变形发展程度系数的RC梁开裂弯矩改进计算公式

针对RC梁开裂荷载计算方法尚未统一的现状,首先,结合18根RC梁试验数据对比了已有的6种RC梁开裂弯矩计算公式,发现开裂弯矩理论计算值与试验值的偏差大小和混凝土强度有关;然后,通过提出塑性变形发展程度系数k,推导新的RC梁开裂弯矩计算公式,并进一步基于k值和塑性影响系数计算值γ_k进行改进;最后,选取12根RC试验梁验证改进公式的准确性,证明改进公式的计算值与试验值吻合更好且偏于安全。     

Self-similar vortex reconnection

As shown by Crow in 1970, the evolution of two almost parallel vortex filaments with opposite circulation exhibits a long-wave instability. Ultimately, the symmetric mode increases its amplitude reconnecting both filaments and ending into the formation of an almost periodic structure of vortex rings. This is a universal process, which appears in a wide range of scales: from the vortex trails behind an airplane to a microscopic scale of superfluids and Bose–Einstein condensates. In this paper, I will focus on the vortex reconnection for the latter case by employing Gross–Pitaevskii theory. Essentially, I focus on the well-known laws of interaction and motion of vortex filaments. By means of numerical simulations, as well as theoretically, I show that a self-similar finite-time dynamics manifests near the reconnection time. A self-similar profile is selected showing excellent agreement with numerical simulations.     

Thermal Catalytic-Cracking Low-Density Polyethylene Waste by Metakaolin-Based Geopolymer NaA Microsphere

Metakaolin-based geopolymer microspheres (MGM) with hierarchical pore structures were prepared by suspension dispersion method in dimethicone at 80 °C. The hydrothermal modification of MGM was carried out at a lower temperature of 80 °C, and a NaA molecular sieve converted from metakaolin-based geopolymer (NMGM) with good crystal structure was prepared and applied in thermal catalytic cracking of low-density polyethylene (LDPE) reaction. The one-pot two-stage thermal catalytic cracking of LDPE was carried out in a 100 mL micro-autoclave under normal pressure. In this work, the optimal proportions and optimal reaction conditions of catalysts for NMGM thermal catalytic cracking of LDPE waste to fuel oil were investigated. The NMGM catalyst showed high selectivity to the liquid product of thermal catalytic cracking of waste LDPE. Under the reaction conditions of reaction time of 1 h and reaction temperature of 400 °C, the liquid-phase yield of thermal catalytic cracking of LDPE reached a high of 88.45%, of which the content of gasoline components was 10.14% and the content of diesel components was 80.97%.     

Quantum Coherences and Classical Inhomogeneities as Equivalent Thermodynamics Resources

Quantum energy coherences represent a thermodynamic resource, which can be exploited to extract energy from a thermal reservoir and deliver that energy as work. We argue that there exists a closely analogous classical thermodynamic resource, namely, energy-shell inhomogeneities in the phase space distribution of a system’s initial state. We compare the amount of work that can be obtained from quantum coherences with the amount that can be obtained from classical inhomogeneities, and find them to be equal in the semiclassical limit. We thus conclude that coherences do not provide a unique thermodynamic advantage of quantum systems over classical systems, in situations where a well-defined semiclassical correspondence exists.     

甲醇制烯烃催化剂失活模型

在固定床反应器中,研究了甲醇制烯烃反应中当SAPO-34分子筛处于失活期时催化剂活性的变化情况,主要考察催化剂活性随反应温度、空速和运行时间的变化,通过对实验数据的分析拟合,得到了催化剂活性与失活时间、反应温度、空速的经验关联式(失活模型),对失活模型的检验表明,该模型与实验数据较为吻合,表明了该式的准确性。 通过对失活模型的分析,获得了当失活速率达到最大时的失活时间与反应时间、空速的关联式,失活过程应服从不均匀表面失活机理,并且当催化剂处于失活区时,失活时间对活性的影响要大于空速和温度。     

微波消解ICP-AES法测定玩具塑料中镉

采用微波加压消解溶样，ICP-AES法测定玩具塑料中镉含量，选择最佳工作条件，方法简便、快速、可靠。适用于各类玩具塑料中镉含量的分析。     

PC聚合物的再利用研究

聚碳酸酯(PC)是手机外壳常用材料,它是一种综合性能优异的热塑性工程塑料,具有较高的回收价值.采用熔融再生方法分别对同种无涂层手机外壳、浅色混杂带涂层和深色混杂带涂层手机外壳三种PC回收料进行了再生利用,对注塑样品进行了力学性能测试,并对断口进行了分析.研究结果表明,三种PC回收料再生后拉伸强度和弯曲强度值较为接近,其中拉伸强度略低于PC原生料,而弯曲强度高于原生料.无涂层PC回收料延伸率和冲击韧性分别达到了24kJ/m2和65;,而混杂带涂层回收料只有它的一半左右.     

间硝基苯胺晶体的定向生长及光学性能研究

采用过冷熔体定向约束生长方法生长了尺寸约为30×15×8 mm3的块状间硝基苯胺晶体,并对生长晶体的光学均匀性、光学透过率、二次谐波转换效率以及激光损伤阈值等性能进行了测试.结果表明:生长的间硝基苯胺晶体在500～1150 nm波段内的光学透过率均在92;以上;最高二次谐波转换效率达到69.6;;单点激光脉冲损伤阈值分别为19.8 GW/cm2(输入光波为1064 nm)和45.3 GW/cm2(输入光波为532 nm).采用过冷熔体定向约束生长的间硝基苯胺晶体适合用作Nd: YAG激光的二次倍频器件,也适于作500～1150 nm波段的光学调制器件.