Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

片状云母径厚比表征方法研究

片状材料的径厚比是片状材料的一个重要特征参数。以片状云母为研究对象,引入形状明显区别于片状云母的聚苯乙烯球作为支撑材料。实验结果表明,当云母片与聚苯乙烯球混合质量比为1∶3时,呈竖立取向云母片的数量达到最大值,随机采集200个云母片的长径和厚度,其径厚比的统计样本均值为15.37。支撑材料聚苯乙烯球为片状云母带来大量支撑位点,显著提高片状云母呈竖立取向的概率,能够快速、直观地同时测量云母片的长径和厚度,有效提高云母片径厚比的测量效率和准确性。     

Micro-droplet Trapping and Manipulation: Understanding Aerosol Better for a Healthier Environment

Understanding the physicochemical properties and heterogeneous processes of aerosols is key not only to elucidate the impacts of aerosols on the atmosphere and humans but also to exploit their further applications, especially for a healthier environment. Experiments that allow for spatially control of single aerosol particles and investigations on the fundamental properties and heterogeneous chemistry at the single-particle level have flourished during the last few decades, and significant breakthroughs in recent years promise better control and novel applications aimed at resolving key issues in aerosol science. Here we propose graphene oxide (GO) aerosols as prototype aerosols containing polycyclic aromatic hydrocarbons, and GO can behave as two-dimensional surfactants which could modify the interfacial properties of aerosols. We describe the techniques of trapping single particles and furthermore the current status of the optical spectroscopy and chemistry of GO. The current applications of these single-particle trapping techniques are summarized and interesting future applications of GO aerosols are discussed.     

Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.     

Determination of Tedizolid Phosphate Using Graphene Nanocomposite Based Solid Contact Ion Selective Electrode; Green Profile Assessment by Eco-scale and GAPI Approach

Antibiotics determination plays a major role in minimizing antimicrobial resistance starting from quality control of pharmaceutical formulations to therapeutic drug monitoring. Green modified glassy carbon electrode has been developed for determination of tedizolid phosphate; new antibiotic prodrug; in presence of its active metabolite. The graphene transducer interlayer, dispersed with PVC, improved the electrode stability and standard potential reproducibility. Graphene hydrophobicity prevented the water layer formation between the sensing layers that decreased the potential drift down to 267 μV h⁻¹. Electrochemical impedance showed a low resistance value for graphene containing sensor due to its high electron transfer ability.     

Performance Improvement of Acid Pretreated 3D-printing Composite for the Heavy Metal Ions Analysis

The performance enhancement of 3D-printed electrode comprised of polylactic acid (PLA) and graphite (Gr) doped with graphene oxide (GO) was studied to detect five heavy metal ions in trace level. The pretreatment of PLA/Gr/GO electrode with potential cycling in H₂SO₄ solution achieved the most sensitive response. The characteristics of the composite electrodes were verified using XPS, FE-SEM, EDXS, Raman, and impedance spectroscopy. The experimental variables affecting the response current were optimized with respect to pH, deposition time, ratio of PLA/Gr/GO, and supporting electrolytes. The pretreated 3D-PLA/Gr/GO electrode showed a wide dynamic range from 0.5 ppb to 1.0 ppm with low detection limits of 0.039–0.13 ppb. The reliability of the PLA/Gr/GO electrode was evaluated by analyzing the reference samples of European Reference Materials.     

Recent developments in the adsorptive removal of heavy metal ions using metal-organic frameworks and graphene-based adsorbents

Clean and potable water is a growing concern around the globe. Among the different water pollutants, heavy metal ions pose a serious health concern to all living beings. The quest for new adsorbents to remove heavy metal ions received a boost with the development in the field of metal-organic framework (MOF). The advancement in synthetic strategies and designing of MOF enabled the researchers to tune the adsorption characteristics and tailor the material specific to a heavy metal ion. Similar to MOF, graphene-based two-dimensional and three-dimensional materials are also promising due to the diverse functionalization possibilities and cost-effectiveness. There had been growing interest in applying MOF and graphene-based materials for the removal of heavy metal ions in the past decade. This review summarizes these developments in detail.     

Synthesis and applications of graphene oxide aerogels in bone tissue regeneration: a review

Development of biocompatible porous supports is a promising strategy in the field of tissue engineering for the repair and regeneration of bone tissues with severe damage. Graphene oxide aerogels (GOAs) are excellent candidates for the manufacture of these systems due to their porosity, ability to imitate bone structure, and mechanical resistance, and according to their surface chemical reactivity, they can facilitate osseointegration, osteogenesis, osteoinduction and osteoconduction. In this review, synthesis of GOAs from the most primary source is described, and recent studies on the use of these functionalized carbonaceous foams as scaffolding for bone tissue regeneration are presented.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

A process–structure–property study of anisotropic PMDA-ODA films

A practical methodology for the correlation and prediction of the process–property performance of advanced materials is developed. The model polymer studied is PMDA-ODA polyimide. The connecting link between the process and the properties is the structural state of the polymer. An essential ingredient for a quantitative characterization of the system is a knowledge of its phase state and intrinsic molecular properties. The intrinsic molecular properties define the limiting performance properties available to the polymer. Anisotropic films and sheets produced by five different fabrication processes are examined. Maps of the molecular symmetry axis, the orientation function, and the thickness distributions of two 50-in.-wide sheets fabricated differently are measured nondestructively for process comparison. Four other film fabrication processes are examined and their three-dimensional orientation states determined and correlated. A three-dimensional orientation function triangular plot permits simultaneous representation of the different fabrication processes on the same figure and allows the investigator to choose the most economic and efficient fabrication route. The structure–property study includes the structural correlation and intrinsic molecular property determination of the anisotropic coefficient of thermal expansion (CTE), the anisotropic mechanical moduli and compliances, and the anisotropic dielectric constants. 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 777–788, 1997