Preparation and characterization of vanadium(IV) oxide supported on SBA-15 and its catalytic performance in benzene hydroxylation to phenol using molecular oxygen

Preparation of dispersed transition metal oxides catalyst with low oxidation state still remains a challenging task in heterogeneous catalysis.In this study,vanadium oxides supported on zeolite SBA-15 have been prepared under hydrothermal condition using V 2 O 5 and oxalic acid as sources of vanadium and reductant,respectively.The structures of samples,especially the oxidation state of vanadium,and the surface distribution of vanadium oxide species,have been thoroughly characterized using various techniques,including N 2-physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),UV-visible spectra(UV-Vis) and UV-visible-near infrared spectra(UV-Vis-NIR).It is found that the majority of supported vanadium was in the form of vanadium(IV) oxide species with the low valence of vanadium.By adjusting hydrothermal treatment time,the surface distribution of vanadium(IV) oxide species can be tuned from vanadium(IV) oxide cluster to crystallites.These materials have been tested in the hydroxylation of benzene to phenol in liquid-phase with molecular oxygen in the absence of reductant.The catalyst exhibits high selectivity for phenol(61%) at benzene conversion of 4.6%,which is a relatively good result in comparison with other studies employing molecular oxygen as the oxidant.     

氢化物发生-电热石英管-塞曼原子吸收光谱法测定钢中痕量砷锑锡

对于钢中痕量砷、锑和锡的测定 ,采用经典光度法虽然简便 ,但灵敏度低。石墨炉原子吸收法有足够的灵敏度 ,仍存在一定的基体干扰[1] 。本文采用流动注射 (FI) -氢化物发生 (HG) -塞曼 (Zeeman)原子吸收法进行测定[2～ 4 ] ,方法不仅准确可靠 ,而且操作简便快速。1　试验部分1 .1　仪器与试剂GGX- 6A型塞曼原子吸收光谱仪 (北京地质仪器厂 )WHG- 1 0 2 A2型流动注射氢化物发生器 (北京瀚时制作所 )电热石英管 :经绝缘处理且无磁性的 0 .3mm电热丝紧密缠绕在6mm的 T形石英管上高性能空心阴极灯砷、锑和锡标准溶液 :1 .0 0 mg· ml-1…     

四苯基卟啉质子化结构变化的理论研究(Ⅱ)——五氟苯基及吡咯环上氟的取代基效应

卟啉的衍生物在DNA螺旋中的嵌入并堆积具有高选择性.为考察5,10,15,20-四(五氟苯基)卟啉(TF₅-PPH₂)和2,3,7,8,12,13,17,18-八氟-5,10,15,20-四(五氟苯基)卟啉(F₂₈TPPH₂)中F取代基对质子化卟啉结构的影响,在四苯基卟啉研究的基础上,用半经验的AM₁MO方法,并进行合理的对称性限制,计算了TF₅-PPH₂和F₂₈TPPH₂及其质子化二酸(TF₅-PPH₄²⁺)和(F₂₈TPPH₄²⁺)的几种可能的构型.结果表明,由于F取代基的影响,质子化过程中的结构、键电荷布居和前线分子轨道均有明显的变化,二者的质子化二酸与溶液质子的快速交换作用也都变得更加困难.     

Cu-P系稀土耐候钢中最佳稀土含量的研究

利用光学显微镜、图像分析仪和电子探针对低氧低硫的10PCuRE耐候钢板坯进行了观察和检测,采用干-湿周浸室内加速试验方法测得了试验钢的腐蚀率.用电化学方法测得了带锈样的阳极极化曲线.研究得出对于S:～0.004%,O:～0.002%的10PCuRE耐候钢,最佳稀土含量为0.0065%～0.012%,此稀土含量对非金属夹杂物的变质作用和耐蚀性能的提高最为有利.     

稀土对耐候钢夹杂物的变质和耐蚀性能的影响

通过金相光学显微镜、扫描电镜及能谱仪,金相定量图象分析仪、非水电解分离夹杂 ICP方法分析固溶稀土含量、电化学腐蚀性能等分析测试手段研究了稀土在耐候钢中存在的形式、非金属夹杂物的形态、尺寸、分布及对耐蚀性能的影响.     

吹气孔直径对RH精炼过程钢液流动和混合特性的影响

针对90t RH精炼装置,以水力学模拟研究了吹气孔直径对真空循环精炼过程中钢液流动和混合特性的影响.模型和原型的相似比为15.模型吹气孔直径分别为0.8 mm和1.2 mm.结果表明,1.2 mm孔径下环流量和主要工艺参数间的关系为Ql Q80.26Du0.69Dd0.80;在给定的吹气量和插入管内径下,增大吹气孔直径并不显著改变精炼过程中钢液流动特征,环流量随吹气孔直径的增大而略有增大,其关系式为Ql=2.40Q 0.23gD0.72u D0.88d d0.13in;相应地,混合时间稍有缩短;0.8和1.2 mm孔径下,τm与搅拌能密度的关系分别为τm ε5和τm ε0.49.     

4′-乙酰基苯并-15-冠-5缩氨基硫脲的微波合成及晶体结构

硫脲衍生物主要通过氢键与阴离子相互作用达到识别的目的，冠醚和硫脲两个主体分子亚单元之间的协同作用往往使冠醚和硫脲表现出对某些客体更加优越的络合识别能力，我们在以前工作的基础上，微波辐射下合成了标题化合物并用红外光谱、核磁共振氢谱、元素分析、X射线单晶衍射对其结构进行了表征，欲进一步研究其对阳离子和阴离子识别的双重功效。     

A New Synthetic Route to 12-Oxo-1, 15-pentadecanlactam

12-Oxo-1,15-pentadecanlactam 7 was synthesized from cyclododecanone with a totalyield of 36% in a seven-step reaction. The azide 5 to 12-nitro-1,15-pentadecanlactam 6 is the key step featured by direct ring expansion.     

Chiral Salen Manganese Complex Immobilized on SBA-15： A New Heterogenized Enantioselective Catalyst for the Epoxidation of Alkenes

Jacobsen‘s catalyst was immobilized onto SBA-15 by multi-step grafting, and this heterogenized catalyst exhibited comparable catalytic performance with the corresponding homogeneous counterpart for the epoxidation of alkenes, and the catalyst could be recycled effectively several times.     

氮杂冠醚取代的单Schiff碱的合成及其钴(Ⅱ)配合物的氧加合性能

由苯并 10 氮杂 15 冠 5出发 ,经 2～ 4步反应合成了氮杂冠醚取代的单Schiff碱HL1,HL2及其异构体HL3 ,HL4.并以元素分析 ,IR ,1 HNMR和MS进行了表征 .在不同温度下 ,测定了它们的钴 (Ⅱ )配合物的氧合反应平衡常数及热力学参数ΔH°和ΔS° ,并与合成的非冠醚类似物CoL2 5 ,CoL2 6和CoL2 7比较 ,考察了配体芳环上取代的氮杂冠醚环及其取代位置对氧加合性能的影响