水浴加热密闭溶样石墨炉原子吸收光谱法测定化探样品中的痕量金

以王水、氟化钾、Fe3+溶液为溶剂,对化探样品进行水浴加热分解1.5 h,经泡沫塑料吸附后,于90℃以上硫脲溶液中解吸20 min,然后采用石墨炉原子吸收光谱仪测定其中的金含量。对仪器分析条件进行了优化。金的质量分数在0.1~100.0 ng/g范围内与吸光度呈良好的线性,线性相关系数r2=0.999 3,检出限为0.100 ng/g。该方法对金标准物质测定结果的相对标准偏差为5.96%~9.25%(n=12),对国家一级标准物质进行分析,测定结果与标准值相符合。该方法满足1∶50 000化探样品中痕量金的分析要求。     

Unstable Ni leaching in MOF-derived PtNi-C catalyst with improved performance for alcohols fuel electro-oxidation

Significance of unstable species leaching was for the first time demonstrated on MOF-derived catalysts by taking PtNi-C as an example, that was instructive for the relevant catalyst fabrication and performance study. PtNi-C catalyst was synthesized by combining Pt nanoparticles with Ni-BTC after annealing in the tube furnace and the unstable Ni species can be easily leached out in nitric acid, and the stable PtNi nanoparticles trapped in the graphite carbon layer were obtained. The greatly improved catalytic ability for alcohol fuels oxidation was verified by comparing the fresh and acid leached catalysts in terms of the high peak current density, specific and mass activity and rapid charge transfer kinetics and high catalytic stability. The current work guides the importance of unstable assistant promoter removal for the MOF derived catalysts.     

叶丝在增温增湿与滚筒烘丝工序中香味组分变化分析

该文研究了制丝线增温增湿和滚筒烘丝工序加工对叶丝香味组分的影响,采用溶剂超声萃取前处理结合GC-MS法测定叶丝的香味组分,并对SIROX增温增湿工序和滚筒烘丝工序前后叶丝香味组分的相对含量进行了分析,比较了工序前后、工序间香味组分的变化趋势。结果显示:①经SIROX增温增湿工序加工后,乙酸、苯甲醇等18种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等6种组分相对含量增加;②经滚筒烘丝工序加工后,乙酸、麦芽酚等14种组分相对含量减少,糠醇、糠醛等6种组分相对含量增加;③经增温增湿及滚筒烘丝两工序后,乙酸、2,3-丁二醇等23种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等4种组分相对含量增加;④两工序间的温度、湿度剧烈变化,使叶丝内部组分发生了美拉德反应、降解反应、挥发等,香味组分经两个工序后发生了一系列显著变化。该研究对提升卷烟产品质量、优化工艺参数、开发高质量产品具有重要意义。     

Recent Progress on Two-dimensional Electrocatalysis

Due to their unique electronic and structural properties triggered by high atomic utilization and easy surface modification, two-dimensional(2D) materials have prodigious potential in electrocatalysis for energy conversion technology in recent years. In this review, we discuss the recent progress on two-dimensional nanomaterials for electrocatalysis. Five categories including metals, transition metal compounds, non-metal, metal-organic framework and other emerging 2D nanomaterials are successively introduced. Finally, the challenges and future development directions of 2D materials for electrocatalysis are also prospected. We hope this review may be helpful for guiding the design and application of 2D nanomaterials in energy conversion technologies.     

First principles calculations of oxygen reduction reaction at fuel cell cathodes

The efficiency of solid oxide fuel cells (SOFC) depends critically on materials, in particular for the cathode where the oxygen reduction reaction (ORR) occurs. Typically, mixed conducting perovskite ABO₃-type materials are used for this purpose. The dominating surface terminations are (001) AO and BO₂, with the relative fractions depending on materials composition and ambient conditions.Here, results of recent large-scale first principles (ab initio) calculations for the two alternative polar (La,Sr)O and MnO₂ (001) terminations of (La,Sr)MnO₃ cathode materials are discussed. The surface oxygen vacancy concentration for the (La,Sr)O termination is more than 5 orders of magnitude smaller compared to MnO₂, which leads to drastically decreased estimated ORR rates. Thus, it is predicted for prototypical SOFC cathode materials that the BO₂ termination largely determines the ORR kinetics, although with Sr surface segregation (long-term degradation) its fraction of the total surface area decreases, which slows down cathode kinetics.     

Ultrafast,Low‐Cost,and Mass Production of High‐Quality Graphene

Fast, mass, and low‐cost production of high‐quality graphene, which is alluring, remains a great challenge, even though some approaches have shown potential for mass synthesis of graphene. Very recently a great breakthrough was made by Tour and co‐workers (Nature 2020, 577, 647–651): in just a second, easily exfoliated and highly crystalline graphene was produced from abundant carbon‐containing species by cost‐effective flash Joule heating with a low energy input of 7.2 kJ per gram graphene. Such an ultrafast, economic, and scalable process for high‐quality graphene production can be considered as a milestone in the graphene field and is highlighted in this article.     

Single‐Mode Microwave Heating‐Induced Concurrent Out‐of‐Plane Twin Growth Suppression and In‐Plane Epitaxial Growth Promotion of b‐Oriented MFI Film under Mild Reaction Conditions

In this study, single‐mode microwave heating was applied in epitaxial growth of b‐oriented MFI seed monolayer prepared by facile manual assembly, resulting in the formation of well‐intergrown and highly b‐oriented MFI film with few twins. It exhibited a precise molecular sieving property at a reaction temperature no higher than 100 °C within 2 hours, therefore making it possible for easy operation in an open environment. The capability for concurrent suppression of undesired out‐of‐plane twin growth and promotion of in‐plane epitaxial growth rate under mild reaction conditions was attributed to the obvious superiority of single‐mode microwave heating in comparison with conventional multi‐mode microwave heating in aspects of microwave field uniformity and intensity. Our research indicated that the single‐mode microwave heating technique could potentially be a useful tool for improving the microstructure and therefore the performance of diverse zeolite films.     

Rapid assessment of the impact of microwave heating coupled with UV-C radiation on the degradation of PAHs from contaminated soil using FTIR and multivariate analysis

The presence and fate of polyaromatic hydrocarbons (PAHs) in the environment are receiving a great concern. In this study, three oil-contaminated soils (industrial area, Dukhan city, and artificial soils) were utilized to examine the effect of microwave (MW) heating and UV-C irradiation on the PAHs degradation. A rapid assessment of the impact was evaluated using Fourier transform infrared (FTIR) and multivariate analysis. The total organic matter values for the maximum PAHs reduction were evaluated based on the FTIR spectra of the contaminated soils followed with the principal component analysis (PCA). The results showed that the highest total organic carbon reduction was achieved for the industrial soil sample that required a high MW power and long MW exposure time. On the other hand, the Dukhan city soil sample, which has the lowest total organic carbon, required a high MW power and short MW exposure time followed by UV-C treatment for 20 min to reach the maximal FTIR transmittance reduction. The cluster analysis was also used to evaluate the impact of MW heating, and MW heating followed by UV-C irradiation on the degradation of PAHs. The PCA results of the industrial city sample showed that neither MW treatment (100% MW, 15 min exposure time) followed by UV-C treatment for 20 min nor 10 min is significantly different from the MW treatment (100% MW, 15 min exposure time). However, for the Dukhan sample, the UV-C treatment at 10 min after high MW power and long exposure time (100% MW, 15 min exposure time) was the most efficient treatment.     

Fragmentation of fuel pellets during transport via a belt conveyor: A design of experiment study

This work investigates the proportion of generated fines in a pilot-scale experiment using a belt conveyor and commercial fuel pellets. For this, a belt conveyor with a length of 3.1 m was used and operated at varying conditions: speeds, percentages of material loading on the belt, two combinations of the inclination angle of the belt and the falling height, and a different number of handling steps. We considered a design of experiments approach based on response surface methodology to investigate the effect of different conditions on the potential of fines generation. Moreover, a comparison between the results of the belt conveyor and three common benchmark experimental approaches (tumbling box, rotary impact tester, and mechanical compression test) was made. Results show that the number of handling steps and the combined effect of drop height and inclination angle directly affected the fines generation. However, the tested belt speed range and the level of loading were of lower significance. A polynomial quadratic model was derived based on the regression analysis and showed a high accuracy to predict the proportion of fines. Moreover, the tumbling box method showed good potential to predict the proportion of fines in a belt conveyor when transported several times.     

大尺寸电阻加热式碳化硅晶体生长热场设计与优化

大尺寸低缺陷碳化硅(SiC)单晶体是功率器件和射频(RF)器件的重要基础材料,物理气相传输(physical vapor transport, PVT)法是目前生长大尺寸SiC单晶体的主要方法。获得大尺寸高品质晶体的核心是通过调节组分、温度、压力实现气相组分在晶体生长界面均匀定向结晶,同时尽可能减小晶体的热应力。本文对电阻加热式8英寸(1英寸=2.54 cm)碳化硅大尺寸晶体生长系统展开热场设计研究。首先建立描述碳化硅原料受热分解热质输运及其多孔结构演变、系统热输运的物理和数学模型,进而使用数值模拟方法研究加热器位置、加热器功率和辐射孔径对温度分布的影响及其规律,并优化热场结构。数值模拟结果显示,通过优化散热孔形状、保温棉的结构等设计参数,电阻加热式大尺寸晶体生长系统在晶锭厚度变化、多孔介质原料消耗的情况下均能达到较低的晶体横向温度梯度和较高的纵向温度梯度。