Dissipative Heating of a Viscoelastic Cylinder under a Load Steadily Moving over Its Surface

The Fourier method is used to find the analytical solutions to two-dimensional quasistatic problems of stationary polyharmonic vibrations and dissipative heating of a linearly viscoelastic cylinder. The influence of the cylinder thickness and the width of the loading area on the thermomechanical state of the cylinder is studied based on numerical data__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 2, pp. 23–32, February 2005.     

微波加热制备空心和锯齿形貌Bi_2Te_3晶体(英文)

Well-crystallized Bi₂Te₃ hollow spheres and nanosaws were prepared by microwave heating. Both the ionic liquid and the microwave heating play important role in the formation of the above nanostructures. Hollow spheres can not be obtained only by electronic stove heating, while the addition of ionic liquid leads to fast preparation of nanosaws structure under microwave heating conditions. The similar experimental results have been observed in the preparation of Bi₂S₃, Sb₂S₃ and Bi₂Se₃ nanostructures.     

Influence of the anode material on the characteristics of an analytical glow discharge cell

The energy transfer to the discharge gas due to various collision processes in the plasma and the heating of the sample are widely known effects in glow discharge (GD) spectroscopy. Despite of the considerable thermal effects and their serious influence on the performance of GD devices, measurements of the discharge gas and sample temperatures are not common at all. The gas temperature depends on the power absorption of the discharge as well as on the temperature of boundaries (sample and anode). In this work the influence of different anode materials in a Grimm-type source on the voltage–current characteristics, crater shapes and GD spectra is investigated. Anodes made of titanium and copper alloys, graphite, and steel with thermal conductivities covering a wide range of values are used. For a fixed voltage and pressure a decrease of the measured current is observed for bad thermal conductive anodes. Cooling of the sample results in an increase of the measured current. Both observations can be explained by changes of the discharge gas temperature. The temperature of the sample is measured from the back side and compared for different anodes. Further, it is found that the choice of the anode material (i) has no significant influence on the crater shape, (ii) results in slightly different sputtering rates and (iii) strong differences of the GD spectra.     

Sensitive Determination of Water Insoluble Dyes Used as Marking of Commercial Petroleum Products Using High‐Performance Liquid Chromatography with Electrochemical Detection

This paper describes an analytical method using high‐performance liquid chromatographic (HPLC) separation coupled with electrochemical detection to detect three dyes, Solvent Blue 14 (SB‐14), Solvent Blue 35 (SB‐35) and Solvent Red 24 (SR‐24). The dyes were eluted and separated using a reversed‐phase column (C‐8) under isocratic elution with the mobile phase containing a mixture of acetonitrile/ammonium acetate (5.0 mmol L^?1) at the ratio of 75 : 25 (v/v). Two sample pretreatment methods were tested and successfully applied to quantify SB14, SB‐35 and SR‐24 dyes in gasoline samples. The proposed method was simple, fast and suitable to detect and quantify marker dyes in gasoline sample at low concentration.     

Fast oxidation of secondary alcohols by the bromate-bromide system using cyclic microwave heating in acidic water

We report an improved, gentle, cyclic microwave activation technique for the oxidation of secondary alcohols using nonhazardous hypobromous acid (BrOH) as the reagent in acidic water. Several aliphatic and aromatic secondary alcohols were successfully oxidized to the corresponding ketones using this technique in high yields and with only minor amounts of side products.     

Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues

Auxin is a crucial phytohormone for precise control of growth and development of plants. Due to its low concentration in plant tissues which are rich in interfering substances, the accurate determination of auxins remains a challenge. In this paper, a new strategy for isolation and enrichment of auxins from plant tissues was obtained by the magnetic molecularly imprinted polymer (mag-MIP) beads, which were prepared by microwave heating initiated suspension polymerization using indole-3-acetic acid (IAA) as template. In order to obtain higher selective recognition cavities, an enhanced imprinting method based on binary functional monomers, 4-vinylpyridine (4-VP) and β-cyclodextrin (β-CD), was adopted for IAA imprinting. The morphological and magnetic characteristics of the mag-MIP beads were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy and vibrating sample magnetometry. A majority of resultant beads were within the size range of 80-150μm. Porous surface morphology and good magnetic property were observed. Furthermore, the mag-MIP beads fabricated with 4-VP and β-CD as binary functional monomers exhibited improved recognition ability to IAA, as compared with the mag-MIP beads prepared with the individual monomer separately. Competitive rebinding experiment results revealed that the mag-MIP beads exhibited a higher specific recognition for the template than the non-imprinted polymer (mag-NIP) beads. An extraction method by mag-MIP beads coupled with high performance liquid chromatography (HPLC) was developed for determination of IAA and indole-3-butyric acid (IBA) in plant tissues. Linear ranges for IAA and IBA were in the range of 7.00-100.0μgL(-1) and 10.0-100.0μgL(-1), and the detection limits were 3.9 and 7.4μgL(-1), respectively. The analytical performance was also estimated by seedlings or immature embryos samples from three different plant tissues, pea, rice and wheat. Recoveries were in the range of 70.1-93.5%. The results show that the present imprinting method is a promising approach for preparation of selective adsorbents for sample preparation of auxin analysis in plant tissues.     

乙炔/空气预混火焰中CO添加对炭黑生成影响的数值分析(英文)

针对乙炔/空气预混火焰中CO添加对炭黑生成的影响进行了详细的数值模拟.通过对含有不同CO添加量的火焰的模拟结果比较,研究CO添加的温度和化学作用对于炭黑形成的影响.计算结果显示CO添加使炭黑的生成单调下降.炭黑体积分数和成核速率随着温度的升高而增加,到达一个阈值后,再随温度的升高而减少.从炭黑生成的H-萃取角度来看,由于反应OH+CO=CO2+H的向右速率增加,H原子增加以及OH自由基减少,CO添加会激发炭黑生成.从炭黑生成的C-添加机理来看,CO添加减小了C2H2的消耗速率,CO添加也有助于炭黑生成,但CO添加降低了燃料中C2H2的体积分数,使得炭黑表面增长速率降低.     

Ion Heating in Dusty Plasma of Noble Gas Mixtures

Ion heating in dusty plasma of noble gas mixtures is studied by the observation of dust particles in stratified glow discharge. The particles and their formations can be used as a “contact‐free” probe of the ion flows. It is shown that under condition of experiments transition of dust particles into crystalline state in pure gases occur at much lower pressures in comparison to the case of gas mixtures. This observation is also supported by the evaluation of “effective” kinetic temperature of dust particles as defined from the velocity distribution function at the same set of discharge parameters. Absolute value of temperature of dust component in the mixture of helium and argon indicates important role of argon ionization process (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Grafting of bifunctional phosphonic and carboxylic acids on Phynox: Impact of induction heating

Phynox, a cobalt-chromium alloy, exhibits interesting mechanical properties making it a valuable material for a number of applications. However, its applications (especially biomedical ones) often require specific surface properties that can be imparted via suitable surface functionalizations. Based on Faraday's law of induction, induction heating is a widely used method to heat metallic substrates directly and contactless. The aim of this work is to compare the influence of induction heating and a conventional heating method on the functionalization of Phynox surfaces with bifunctional (6-phosphonohexanoic and 11-phosphoundecanoic acids) monolayers in order to create a platform for a large variety of post-grafting chemical reactions, e.g. with alcohols and amines, to modify and control the surface properties. In a first part, we assess the influence of the heating method on the interaction between the two terminal moieties of the 6-phosphonohexanoic and 11-phosphoundecanoic acids and the Phynox surface by studying the grafting of n-dodecylphosphonic acid and n-dodecanoic acid separately. The suitability of such bifunctional molecules for post-grafting chemical reactions has then been assessed by studying the post-grafting of a fluorinated alcohol by the Steglich esterification reaction between the carboxylic end of the grafted bifunctional molecules and the alcohol function of the post-grafted molecule. It has been shown that induction heating can lead to a much more selective adsorption of bifunctional molecules on the surface of Phynox, leaving a higher amount of free carboxylic acid functions to react during the second modification step.     

Excimer laser accelerated hydrothermal synthesis of ZnO nanocrystals & their electrical properties

The synthesis of ZnO nanocrystals is reported using a hydrothermal chemical growth technique combined with 248 nm nanosecond excimer laser heating at fluences in the range 0-390 mJ cm⁻². The effect of laser heating in controlling the morphology of the nanocrystals is investigated using optical spectroscopy and electron microscopy characterization. Laser heating is shown to allow control of the crystal morphology from nanoparticles to nanorods as well as to modify the size distributions. The results indicate that not only does the laser accelerate the growth of nanocrystals, but can also produce crystals with a narrow size distribution possibly via photothermal size selection. An initial study of electrical conduction properties of ZnO nanocrystal thin films is also discussed.