一种用于金属薄板轴向拉压疲劳试验的防弯夹具

在金属薄板的轴向疲劳S-N曲线测试中,研究将一种侧向防弯曲夹具应用于存在压向载荷的试验。通过粘贴应变片方法测量试样的表面应力,对试样的受力情况做了定量的分析。测量结果表明试样安装防弯曲夹具后,基本消除了由压缩失稳产生的弯曲应力。且通过对不同拧紧方式的测量,表明一定的夹紧力下不对试验力产生影响。试验夹具设计成对试样中心轴线的支撑而让边缘疲劳敏感部位处在非接触状态,试样断口表明疲劳起源在这些并没有与试样接解的部位。用钛和铝两种材料的薄板在不同试验机上进行了不同寿命和频率的试验,试验结果与正应力比试验同时给出以对比,各种研究表明本试验有效解决了薄板疲劳受压时的失稳问题。     

疲劳损伤问题中有效应力的一种定义

有效应力是损伤力学中的一个重要概念,这个概念的提出为用无损状态下的本构方程描述有损伤材料的行为提供了有效手段.本文探讨损伤力学中有效应力的定义,通过对损伤演化规律的分析,指出有效应力的一般定义不适用于疲劳损伤问题.本文认为,疲劳问题中的有效应力应该以等效寿命为基础,并根据剩余寿命的概念引入了疲劳损伤问题中有效应力的一种定义.     

基于液相色谱-质谱联用技术的代谢组学方法用于中药通心络和人参对过度疲劳大鼠干预作用的评价

用代谢组学方法评价了中药通心络和人参对过度疲劳大鼠的干预作用.通过构造大鼠过度疲劳模型,并分别用通心络和人参进行干预,采用快速液相色谱-离子阱飞行时间质谱(UFLC-IT-TOF-MS)获取大鼠血浆代谢轮廓,并用正交偏最小二乘法(OPLS)进行多变量统计分析,分别找出用于区分通心络和人参干预组大鼠同正常对照大鼠、过度疲...     

Synthesis,Characterization and Photochromic Properties of Novel Naphthopyrans with Hydrazone Unit Residue

A series of naphthopyrans with hydrazone unit ( 8a – 8m ), were synthesized and characterized by ¹H NMR, ¹³C NMR, IR and HRMS. The photochromic properties were investigated under continuous irradiation, in particular regard to the fatigue resistance and the lifetime of the colored open form in solution and polymers. The results showed that these compounds had both good photochromic properties and high fatigue resistance. Detailed studies showed that representative compound 8d (3,3‐di‐4‐methoxybenzoic acid methylenehydrazino‐[3H]‐naphtho [2,1‐b]pyran) had good photochromic properties in THF solution, in solid state, and in polymers, and exhibited a significant bathochromic shift in the spectra of the open forms compared to known naphthopyrans 9 (3,3‐diphenyl‐[3H]‐naphtho[2,1‐b]pyran). On the other hand, the higher melting points of target compounds are promising for the polymer film preparation through hot‐melt method.     

DIGITAL IMAGE CORRELATION STUDIES FOR FATIGUE MICRO-CRACK INITIATION AND PROPAGATION OF NI BASED SUPERALLOY

An experimental investigation on the mechanical mechanisms of fatigue micro-crack initiation and propagation of a nickel-based superalloy is presented. By coupling digital image correlation method and scanning electron microscope, the fatigue residual strain distribution at the grain scale has been obtained. The results showed that there is a trend of accumulation for the residual strain. Micro-cracks are more likely to initiate in or near the areas with particularly large residual strain, and propagate along the large-strain paths.     

深水钢悬链线立管触地区疲劳实验系统设计

深水钢悬链线立管(steel catenary riser, SCR)触地区易发生疲劳破坏, 且疲劳寿命预测问题是 目前理论计算与数值分析的难点, 通过实验能更好地促进理论和数值研究. 因此在相关理论 研究基础上, 设计一套SCR触地区疲劳实验系统, 模拟实际工作状况, 考虑张力、弯曲、内 外压与管土相互作用等因素的变化组合. 该实验系统为以后开展深水立管疲劳实验、研究SCR 触地区疲劳破坏机理以及准确预测SCR触地区的疲劳寿命奠定基础.     

16Mn钢在不同条件下的疲劳行为研究

对截面为3 mm×3mm的16Mn钢试件在空气和3.5%NaCl溶液中分别进行疲劳试验,获得了S-N曲线,并对疲劳试样表面和断口形貌进行了观察.结果表明:与空气相比,3.5%NaCl腐蚀溶液使16Mn钢的疲劳强度显著降低;在空气中疲劳试样只有一个萌生于试样表面基体的裂纹源,而在3.5%NaCl溶液中一般有多个裂纹源,而...     

Degradation modeling of 2 fatigue‐crack growth characteristics based on inverse Gaussian processes: A case study

Most modern products that are highly reliable are complex in their inner and outer structures. This situation indicates quality characterization by the interaction of multiple performance characteristics, which motivates the utilization of robust reliability models to obtain robust estimates. It is paramount to obtaining substantial information about a product's life cycle; therefore, when multiple performance characteristics are dependent, it is important to find models that address the joint distribution of performance degradation of such. In this paper, a reliability model for products with 2 fatigue‐crack growth characteristics related to 2 degradation processes is developed. The proposed model considers the dependence among degradation processes by using copula functions considering the marginal degradation processes as inverse Gaussian processes. The statistical inference is performed by using a Bayesian approach to estimate the parameters of the joint bivariate model. A time‐scale transformation is considered to assure monotone paths of the degradation trajectories. The comparison results of the reliability analysis, under both dependent and independent assumptions, are reported with the implementation of the proposed modeling in a case study, which consists of the crack propagation data of 2 terminals of an electronic device.     

Fatigue failure criteria and degradation rules for composites under multiaxial loadings

To develop design rules for dynamically loaded composite structures, extensive static and cyclic tension/compression-torsion tests were carried out on carbon-fibre-reinforced composites, in which especially the important influence of multiaxial loading conditions on their fatigue behaviour was investigated. Physically based failure criteria for static loadings are modified for multiaxial cyclic loadings, and a good agreement with experiments is achieved. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 5, pp. 631–641, September–October, 2006.     

The effects of annealing on fatigue crack propagation in polyethylene

Fatigue crack propagation tests on annealed and quenched medium-density polyethylene showed the annealed specimens to have much lower resistance to crack initiation and subsequent propagation. Although the same fracture mechanism, in which the brittle crack gradually becomes more ductile, prevailed in both cases, the voided and fibrillated crack tip root craze in the annealed material was much weaker that the nonfibrillated quenched root craze. Microstructural analyses indicate that the annealed material had separate crystallite populations, whereas the quenched material had a more homogeneous morphology. The highest melting fraction of the annealed material was composed of lamellae that were about 270 Å thick, and the quenched lamellae were estimated to be 160 Å thick. The reduced fatigue crack propagation resistance of the annealed material was suggested to be a result of a lower concentration of tie molecules and its reduced damping capability, compared to the quenched material. © 1995 John Wiley & Sons, Inc.