Chemometric data analysis of pollutants in wastewater—a case study

In this study, chemometric techniques such as cluster analysis (CA), discriminant analysis (DA), principal component analysis (PCA) and partial least squares (PLS) were used to analyse the wastewater dataset to identify the factors which affect the composition of sewage of domestic origin, spatial and temporal variations, similarity/dissimilarity among the wastewater characteristics of cis- and trans-drains and discriminating variables. Samples collected from 24 wastewater drains in Lucknow city and from three sites on Gomti river in the month of January/February, May, August and November during the period of 5 years (1994-1999) were characterized for 32 parameters. The multivariate techniques successfully described the similarities/dissimilarities among the sewage drains on the basis of their wastewater characteristics and sources signifying the effect of routine domestic/commercial activities in respective drainage areas. Spatial and seasonal variations in wastewater composition were also determined successfully. CA generated six groups of drains on the basis of similar wastewater characteristic. PCA provided information on seasonal influence and compositional differences in sewage generated by domestic and industrial waste dominated drains and showed that drains influenced by mixed industrial effluents have high organic pollution load. DA rendered six variables (TDS, alkalinity, F, TKN, Cd and Cr) discriminating between cis- and trans-drains. PLS-DA showed dominance of Cd, Cr, NO₃, PO₄ and F in cis-drains wastewater. The results suggest that biological-process based STPs could treat wastewater both from the cis- as well as trans-drains, however, prior removal of toxic metals will be required from the cis-drains sewage. Further, seasonal variations in wastewater composition and pollution load could be the guiding factor for determining the STPs design parameters. The information generated would be useful in selection of process type and in designing of the proposed sewage treatment plants (STPs) for safe disposal of wastewater.     

Thermal techniques to study complex elastomer/filler systems

The transfer of heat through an elastomeric matrix is important for both the processing of the material and its subsequent lifetime. Thermal conductivity can be used to evaluate the influence of different polymers and fillers on heat transfer. Additionally, the dispersion of the filler has an effect on heat transfer and thermal conductivity measurements can be used to provide semi-quantitative estimations of filler dispersion. The degradation of sulfur-crosslinked elastomer systems has been studied for many years. The degradation of the crosslinks (changes in sulfur rank) and degradation of the polymer backbone by thermal and/or oxidative processes have been studied extensively using many techniques including thermal analysis (references). However, the degradation of the crosslinked-polymer 'network' is less well understood. The relationship of the crosslink network to this degradation process is a key to both the long term and higher temperature performance of the sulfur-crosslinked elastomer. The changes in physical properties observed upon exposure of sulfur-crosslinked elastomers can be monitored using dynamic mechanical analysis. Subsequently, other thermal techniques can be used to monitor the chemistry that is occurring during these degradations. Thermal desorption/mass spectroscopy and dynamic scanning calorimetry are used to complete the picture of the degradation processes taking place. Examples of these techniques will be provided to illustrate the utility of the analytical approach, the chemistry involved in these degradation processes and the effect of changes in the polymer, cure package and other ingredients. This revised version was published online in August 2006 with corrections to the Cover Date.     

土壤中挥发性有机化合物的GC-MS测定

利用气相色谱－质谱联用技术，对某废弃化工厂原厂区及附近农田的土壤中可能存在的60种挥发性有机化合物进行了定性和定量分析；采用质量保证和质量控制步骤对分析结果进行监测，结果令人满意。     

二点滴定法研究

就二点滴定法的原理，方法和应用进行了讨论，导出了二点滴定法计算公式。讨论了滴定剂加入量与测定结果准确度的关系。已用本法对标样样液及试样进行了多次测定，测定结果相对误差及相对标准偏差约０．２％。本法简便，快速，准确，且昨达于任何滴定类型的通用方法。     

Evaluation of molecular structure in Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate by IR external reflection spectroscopy

 In situ polarized Fourier transform IR external reflection spectra of Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate on a water surface were recorded for various surface areas, and their molecular structures were estimated. In the zinc stearate monolayer, the wavenumbers and the absorbances of the antisymmetric and symmetric methylene stretching bands did not change during monolayer compression, which means that orientational and conformational changes of the hydrocarbon chain did not occur. However, wavenumber changes of the antisymmetric and symmetric carboxylate stretching bands were observed during surface compression. The change in the binding nature of the zinc cation to the carboxylate group was speculated. Moreover, it was elucidated that the structure of the hydrocarbon chain in the zinc 12-hydroxystearate monolayer was different from that in the zinc stearate monolayer. Received: 21 March 2001 Accepted: 6 July 2001     

Flow injection-spectrophotometric determination of cresol compounds in water by reaction withp-aminophenol

A spectrophotometric method has been developed for the simultaneous determination ofo-cresol andm-cresol in water by reaction withp-aminophenol (PAP). Three different methodologies have been assayed; (i) batch analysis, after reaction in an alkaline medium in the presence of dissolved molecular oxygen as oxidizing agent, (ii) a stopped-flow procedure, carried out in the presence of KIO₄ and (iii) a flow injection method based on the same approach. The batch procedure requires 22 min for the full development of colour witho-cresol and 12 min form-cresol. In the stopped-flow mode, using KIO₄ and a reaction time of 12 min, better sensitivity can be obtained for both compounds and limits of detection of 10 g 1^–1 foro-cresol and 30 g 1^–1 form-cresol were found. The flow injection method has a lower sensitivity but permits more than 80 injections per hour. Based on the different maximum absorbance wavelengths obtained for the reaction products of PAP witho-cresol (614 nm) andm-cresol (632 nm), both compounds can be simultaneously determined in water samples and recoveries of 90 to 115% were found in spiked water samples of different types.     

Heat-resistant polymers from melt-processable bisimido-bisphthalonitriles

Heat-resistant polymers which are processable into void-free components and suitable for composite applications have been synthesized by thermal/chemical polymerization of four newly developed bisimido-bisphthalonitriles containing silicon, ether, carbonyl, and hexafluoroisopropylidene groups. Thermal polymerization involving addition reactions was performed at 200–275°C for 2–10 h and then post-curing at 310°C for 10 h. Polymers VI, VII, VIII , and IX were obtained. The thermal polymerization was monitored using infrared spectroscopy. Thermal polymerization was also carried out in the presence of an aromatic diamine. A polyhexasocyclane ( V ) was synthesized by condensation polymerization of ether containing bisimido-bisphthalonitrile with 4,4′-diaminodiphenyl ether in solvent phenol. The synthesized polymers were evaluated for thermal stability using dynamic thermogravimetric analysis (TGA). Polymers VII, VIII, IX , and X showed thermal decomposition temperature in the range of 475–500°C in nitrogen and air atmosphere. The char yield of the polymers was in the range of 60–69% in nitrogen at 800°C. This study indicated that synthesized thermosetting polymers from ether and keto containing bisimido-bisphthalo-nitrile are potential candidates for development of graphite composites. © 1993 John Wiley & Sons, Inc.     

钯镁基体改进剂对铅,铋,锗在石墨炉中原子化影响的研究

通过原子吸收和X-射线衍射分析证明,加入钯镁基体改进剂在预热处理后对Pb、Bi和Ge三个元素分别生成金属间化合物PbPd_3、BiPd_3、Ge_9Pd_(23)和其他化合物,从而提高了最高允许灰化温度,改变了原子化机理。在原子化阶段这些金属间化合物直接分解为金属原子,结果提高测定灵敏度。     

Reduction of Chemical Reactions in Nitrogen and Nitrogen–Hydrogen Plasma Jets Flowing into Atmospheric Air

The large number of possible chemical reactions represents a severe burdenfor modeling of even relatively simple plasma systems. Reduced sets ofchemical reactions have been obtained for numerical simulations of nitrogenand nitrogen-hydrogen plasma jets flowing into an atmospheric airenvironment. The important or active reactions are determined based on asimplified reduction method. A reaction is considered active if it leadsto higher sensitivities than a specified cutoff sensitivity of 1%. Theactive reactions exert a significant influence on main plasma parameters,such as velocity, temperature, and species concentrations. The sensitivityanalysis for the specified systems shows that two NO reactions, known asZel'dovich reactions (N₂+ONO+N andNO+OO₂+N),⁽¹⁾ are both active in a nitrogenplasma jet. On the other hand, the latter is not active and may be omittedin a nitrogen–hydrogen plasma jet. A nitrogen–hydrogen plasmajet requires contribution of two active charge exchange reactions:N₂+N⁺N⁺ ₂+N andN+H+N+ +H, while only the former is needed in a nitrogen plasmajet. The dissociation reactions are all active in both plasma jets, exceptthe dissociation of OH.     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday