Focal nodular hyperplasia of the liver: diffusion and perfusion MRI characteristics

Purpose

To present diffusion and perfusion magnetic resonance imaging (MRI) characteristics of focal nodular hyperplasia (FNH) of the liver.

Materials and Methods

Thirty-five patients with 52 FNHs (21 were pathologically-confirmed) underwent MRI at 1.5-T device. MR diffusion [diffusion-weighted imaging (DWI)] was performed using a free-breathing single-shot, spin-echo, echo-planar sequence with b gradient factor value of 500 s/mm². MR perfusion [perfusion-weighted imaging (PWI)] consisted of a 3D free-breathing LAVA sequence repeated up to 5 minutes after injection of 7 mL Gd-BOPTA (MultiHance, Bracco, Italy) and 20 mL saline flush at a flow rate of 4 mL/s. Apparent diffusion coefficient (ADC) and time-signal intensity curve (TSIC) were obtained for both normal liver and each FNH by two reviewers in conference; maximum enhancement (ME) percentage, time to peak enhancement (TTP), and maximal slope (MS) were also calculated.

Results

On DWI mean ADC value was 1.624×10^− 3 mm²/s for normal liver and 1.629×10^− 3 mm²/s for FNH. ADC value for each FNH and the normal liver was not statistically different (P= .936). On PWI, TSIC-Type 1 (quick and marked enhancement and quick decay followed by slowly decaying) was observed in all 52 FNHs, and TSIC-Type 2 (fast enhancement followed by slowly decaying plateau) in all normal livers. The mean ME, TTP and MS values were significantly different for FNH and normal liver (P= .005).

Conclusion

FNHs of the liver showed typical diffusion and perfusion MRI characteristics in all cases. On the ADC map, we could get similar value between the FNHs and the background parenchyma. On the perfusion imaging, FNHs showed a different pattern distinguished from the background liver.     

氢稀释对纳米晶硅薄膜晶化特性的影响及薄膜生长机理

以SiH₄与H₂作为前驱气体,采用射频等离子增强化学气相沉积技术制备了纳米晶硅薄膜.利用Raman散射和红外吸收光谱等技术,对不同氢稀释比条件下薄膜的微观结构和键合特性进行了研究.结果表明,随着氢稀释比增加,薄膜的晶化率明显提高,而氢稀释比过高时,薄膜晶化率呈现减少趋势.红外吸收光谱分析表明,纳米晶硅薄膜中氢的键合模式与薄膜的晶化特性密切相关.随着氢稀释比增加,薄膜中整体氢含量和SiH₂键合密度明显减少,而在高氢稀释比条件下,氢稀释比增加导致薄膜中SiH₂键合密度和整体氢含量增加.     

双重网络嵌入对公司IPO后市场表现的影响研究

将社会网络嵌入理论从单一网络拓展至双重网络,分析上市公司同时嵌入风险投资网络和承销商网络对公司IPO上市后市场表现的影响。利用2004～2017年有风险投资支持的IPO公司数据,实证检验结果表明：(1)单独嵌入风险投资网络中心位置、单独嵌入承销商网络中心位置,均会提高公司IPO后市场表现;(2)同时嵌入风险投资网络中心位置和承销商网络中心位置,对公司IPO后短期市场表现的正向影响会相互替代;(3)同时嵌入风险投资网络中心位置和承销商网络中心位置,对公司IPO后长期市场表现的正向影响会互相补充。     

ELECTRON TRANSPORT BEHAVIOURS IN THE NITROGEN DIRECT CURRENT GLOW DISCHARGE

A Monte Carlo simulation is presented to describe the electron transport behaviours in the nitrogen direct current glow discharge. The energy and angular distributions of the electrons at different positions of the cathode dark space are calculated; their energy and density distribution features throughout the entire discharge are discussed. The influence of molecular vibrational excitation, typical for electron－molecule collisions, has been studied and the elementary process of active species generation has been illustrated. The simulated results reveal that, in the cathode dark space, the high-energy electrons are mainly forward scattering and behave as a high-energy ‘electron beam'. The sharp increase of the number of secondary electrons plays an important role in producing active species at the interface between the cathode dark space and the negative glow region. The vibrational excitation enhances the energy loss of electrons in the negative glow region.     

Reliability analysis of stochastic structural system considering static strength, stiffness and fatigue

Multi-failures are possible to appear in the process of using the structural system, such as dead load failure, fatigue failure and stiffness failure. The expression of residual resistance is given based on the impact of random crack propagation in- duced by the fatigue load on the critical limit stress and section modulus in this paper. The failure modes of every element of the structural system are analyzed under dead and fatigue loads, and the influence of the correlation of failure modes on reliability of the element is considered. Failure mechanism and the correlation of failure modes under dead and fatigue loads are discussed, and the method of reli- ability analysis considering static strength, fatigue and stiffness is given. A nu- merical example is analyzed, which indicates that the failure probability is different for different use life and the influence of dead and fatigue loads on reliability of the structural system is different as well. This method of reliability analysis, in the pa- per, is better than the method only considering a single factor (or static strength, or fatigue, or stiffness, etc.) in the case of practical engineering.     

Formation of PAHs and soot platelets: multiconfiguration theoretical study of the key step in the ring closure–radical breeding polyyne‐based mechanism

Polyynes of general formula H? (C?C? )_nH are known to play a significant role in combustion and pyrolysis, possibly being intermediates in the formation of polycyclic aromatic hydrocarbons (PAHs) and soot. They have also been detected in astrophysical investigations. The key step in the polyyne‐based radical breeding mechanism for PAH growth is a cyclization, put forward by Krestinin, which implies disruption of electron couples, plausibly expected to be energy demanding. We explore the electronic features and energy requirements of such a process by quantum mechanical multiconfiguration methods (CASSCF and CASPT2). The features of the wavefunction are analyzed, and the free energy barriers are estimated over a wide range of temperatures, for three molecular models. The initial radical adduct A, generated by H ^. , HC?C ^. (ethynyl), or HC?C? C ^. H₂ ( propargyl ) addition to butadiyne (BD, HC?C? C?CH), undergoes a cyclization with the generation of two new radical centers. However, in most of the cases, one of these new singly occupied sp² orbitals has some overlap with the unpaired electron lobe already existent in A: some sort of bonding builds up and consequently the triradical character cannot be large. Only one model suggests a possible role of the radical breeding mechanism during combustion. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental and theoretical evidence for the chemical mechanism in SERRS of rhodamine 6G adsorbed on colloidal silver excited at 1064 nm

The evidence for the existence of a chemical mechanism in surface‐enhanced resonance Raman scattering (SERRS) of rhodamine 6G (R6G) adsorbed on colloidal silver excited at 1064 nm is reported on the basis of experimental and theoretical analyses. A weak absorption peak at around 1060 nm for R6G‐functionalized silver nanoparticles was observed, which is not present in the individual spectra of R6G or silver nanoparticles. Theoretically, the charge difference density reveals that this weak absorption is a metal‐to‐molecule charge transfer excited state. Copyright © 2010 John Wiley & Sons, Ltd.     

农药丁吡吗啉与腐殖酸作用机理探讨

探讨农药丁吡吗啉与腐殖酸的作用机理, 可进一步了解农药在土壤中腐殖酸催化下降解的行为过程。将市售腐殖酸进行逐级分离,获得黄腐酸、棕腐酸和黑腐酸的固态或溶液状态,而后分别与农药丁吡吗啉进行作用,利用红外,荧光两种分析方法对其作用机理进行了解释。结果表明,三组分与丁吡吗啉之间广泛存在范德华力、次级键等弱作用力。黄腐酸与丁吡吗啉之间存在氢键和电荷转移吸附等作用力,棕腐酸与丁吡吗啉存在电荷转移吸附等作用力,黑腐酸与丁吡吗啉之间的作用力最弱,即依照黄腐酸、棕腐酸、黑腐酸三组分平均分子量依次递增的顺序,与农药丁吡吗啉之间的作用力依次降低。     

Effects of duty ratio at low frequency on growth mechanism of micro-plasma oxidation ceramic coatings on Ti alloy

The aim of this work is to study the effects of duty ratio on the growth mechanism of the ceramic coatings on Ti-6Al-4V alloy prepared by pulsed single-polar MPO at 50 Hz in NaAlO₂ solution. The phase composition of the coatings was studied by X-ray diffraction, and the morphology and the element distribution in the coating were examined through scanning electron microscopy and energy dispersive spectroscopy. The thickness of the coatings was measured by eddy current coating thickness gauge. The corrosion resistance of the coated samples was examined by linear sweep voltammetry technique in 3.5% NaCl solution. The changes of the duty ratio (D) of the anode process led to the changes of the mode of the spark discharge during the pulsed single-polar MPO process, which further influenced the structure and the morphology of the ceramic coatings. The coatings prepared at D = 10% were composed of a large amount of Al₂TiO₅ and a little γ-Al₂O₃ while the coatings prepared at D = 45% were mainly composed of α-Al₂O₃ and γ-Al₂O₃. The coating thickness and the roughness were both increased with the increasing D due to the formation of Al₂O₃. The formation of Al₂TiO₅ resulted from the spark discharge due to the breakdown of the oxide film, while the formation of Al₂O₃ resulted from the spark discharge due to the breakdown of the vapor envelope. The ceramic coatings improved the corrosion resistance of Ti-6Al-4V alloy. And the surface morphology and the coating thickness determined the corrosion resistance of the coated samples prepared at D = 45% was better than that of the coated samples prepared at D = 10%.