Development of the continuously variable volume reactor for flow injection analysis: Part 1. Design, capabilities and testing

A new apparatus for mixing sample and reagent in flow injection analysis (FIA) is described. The continuously variable volume reactor (CVVR) replaces the conventional mixing coil in a flow injection (FI) manifold to provide mixing and dilution. A linear actuator motor allows control of the chamber volume via LabVIEW software. The chamber volume can be incremented in steps of 1 μl over the range 68-1704 μl. In addition, the chamber has an integral variable-speed stirring unit that is also under computer control. Experiments were performed to evaluate the dispersion characteristics of this new device, evaluate the volume reproducibility, and understand the mixing characteristics. Use of the chamber is shown in the determination of iron(II) in pond water, and in NIST SRM 1643d with excellent results and a detection limit of 3.7 μg/l iron(II). Advantages of the CVVR and future research activities using the device are discussed.     

Flow injection determination of iodide ion in a photographic developing solution using iodide ion-selective electrode detector

A potentiometric flow injection determination method for iodide ion in a photographic developing solution was proposed by utilizing a flow-through type iodide ion-selective electrode detector. The sensing membrane of the electrode was Ag₂S–AgI membrane. The response of the electrode detector as a peak-shape signal was obtained for injected iodide ion in a photographic developing solution. A linear relationship in the subnernstian zone was found to exist between peak height and the concentration of the iodide ion in a photographic developing solution in a concentration range from 0 to 6.0×10⁻⁵ mol l⁻¹. The relative standard deviation for ten injections of 2×10⁻⁵ mol l⁻¹ iodide ion in a photographic developing solution was 0.96% and the sampling rate was approximately 12–13 samples h⁻¹. The iodide ion could be determined under coexisting of an organic reducing reagent and inorganic electrolytes of high concentration in a photographic developing solution sample solution by the present method.     

Differential pulse voltammetric determination of trace Te(IV) at a poly(3,3′-diaminobenzidine) film modified gold electrode in flow systems

Electropolymerization of 3,3′-diaminobenzidine on a gold surface gave an adherent, stable film of poly(3,3′-diaminobenzidine) (PDAB). This polymer film retained the complexational functionalities of its monomer, demonstrating preconcentration abilities for several ions, including Se(IV) and Te(IV). In particular, in this work, continuous flow and flow injection methods were developed for the sensitive and selective determination of Te(IV). The optimized method for the continuous flow mode had a detection limit of 5.6×10⁻⁹ mol l⁻¹ for 10 min preconcentration. Typical relative standard deviations for six consecutive determinations were 1.82 and 2.56% for Te(IV) concentrations of 1.0×10⁻⁶ and 5.0×10⁻⁸ mol l⁻¹, respectively (10 min preconcentration). The method was applied to the determination of Te(IV) in real samples.     

从聚丙烯流动曲线估算分子量分布

聚丙烯的控制降解技术由于能够带来很好的经济效益，国内外都在进行研究．其中分子量分布是一个重要数据，它对于聚丙烯的注塑、纺丝、薄膜等加工过程都有重要的影响．分子量分布一般用重均分子量Mw和数均分子量Mn之比D=Mw/Mn来表征，称为分子量分布指数．它可以     

Multipurpose chamber for the implementation of gas diffusion, dialysis, solid-phase extraction and precipitation/dissolution in continuous flow analyzers

A multipurpose chamber capable of implementing a variety of continuous separation techniques is reported. The proposed module can be used in conjunction with flow manifolds coupled on-line to optical detectors in order to develop simple autoanalyzers for full sample pretreatment. The analytical applicability of such a device is discussed with specific regard to gas diffusion, dialysis, solid-phase extraction (SPE), and precipitation/dissolution techniques. Its versatility and simplicity are among the main advantages. Four different automated analyzers based on the use of the multipurpose chamber have been developed for monitoring of different quality control parameters of liquid food samples, namely, carbon dioxide in beer, ascorbic acid in fruit juice, caffeine in soft drinks and lactose, fat and protein in milk. The results obtained were compared with those provided by the existing alternatives for the same applications in terms of sensitivity and precision.     

Electrochemical ELISA for the screening of DDT related compounds: analysis in waste waters

An electrochemical enzyme-linked immunosorbent assay (ELISA) for the detection of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (p,p′-DTT), 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p′-DDE), 1,1-dichloro-2,2-bis-(4-chlorophenyl)ethane (p,p′-DDD) and o,p-DDT was developed. Optimization of the ELISA competition conditions, led to similar response for the p,p′-isomers. The activity of the label enzyme (horseradish peroxidase) was measured electrochemically using 3,3′,5,5′-tetramethylbenzidine as substrate. The use of purified antiserum for p,p′-DDT resulted in a sensitive assay with a detection limit of 40 pg ml⁻¹ and R.S.D. ranging from 1 to 3% intra-day and 3 to 6% inter-day. No matrix effect for waste water samples of different origin has been evidenced. The ELISA was used to detect DDTs in 20 samples after extraction in diethylether. This method appears suitable for routine screening of DDTs without sample pre-treatment other than dilution in PBS or after organic solvent extraction if high sensitivity is required.     

Critical Comparison of Four Simple Adaptors for Flow Amperometric and Stripping Voltammetry with Mercury Drop Electrodes in Batch Cells

Electrochemical batch cells with mercury drop electrodes, MDEs, are readily available from a number of producers and widely used in electroanalysis for polarography, voltammetry and stripping voltammetry. To increase sample throughput and reduce reagent and sample consumption, the tendency is to couple the MDE with flow analysis systems (e.g., FIA, SIA or BIA). Many special flow cells for MDEs are described in the literature, but it is easier to convert existing commercial batch cells to flow operation. To assess the performance of such flow adaptors, four models were chosen because they are directly fitted to the glass capillary of any MDE, light enough not to impair the mechanical drop knocker and can be effortlessly built in the laboratory. They were all found adequate for flow amperometry and stripping voltammetry, with differences in sensitivity, flow rate dependence, response time, drop stability, tolerance to bubbles, uncompensated resistance and recontamination of disposed analyte from the electrolytic bath. Two of them, a simple L‐shaped PTFE tube and an upstream nozzle holder made from a disposable pipette tip, gather a larger set of desirable features.     

Correction of iron interface in the spectrophotometric flow injection catalytic determination of molybdenum in plants

Iron interference in the spectrophotometric catalytic determination of molybdenum based on the iodide-hydrogen peroxide reaction can be corrected by using sulphosalicylic acid as masking and color-forming reagent. The catalytic influence of iron ions is circumvented to the extent of about 90% and correction of any remaining iron ions is possible by monitoring the colored iron(III)-salicylate complex at 490 nm. In this way, iron is also determined. With the proposed system, molybdenum can be determined in plant and food digests within the 0–100 μg Mo 1⁻¹ range in the presence of up to 25 mg Fe 1⁻¹, at a sampling rate of about 50 determinations h⁻¹. The relative standard deviation of 10 consecutive measurements was estimated as < 2%. Results for samples were comparable with those obtained by graphite furnace atomic absorption spectrometry. In addition, recoveries within the range 94–100% were calculated.     

Application of manganese(IV) dioxide microcolumn for determination and speciation of nitrite and nitrate using a flow injection analysis-flame atomic absorption spectrometry system

A flow injection (FI) method with flame atomic absorption spectrometry (FAAS) detection was developed for the determination and speciation of nitrite and nitrate in foodstuffs and wastewaters. The method is based on the oxidation of nitrite to nitrate using a manganese(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the MnO₂ solid phase reagent to Mn(II), which is measured by FAAS. The absorbance of Mn(II) are proportional to the concentration of nitrite in the samples. The injected sample volume was 400 μL with a sampling rate of analyses was 90 h⁻¹ with a relative standard deviation better than 1.0% in a repeatability study. Nitrate is reduced to nitrite in proposed FI-FAAS system using a copperized cadmium microcolumn and analyzed as nitrite. The calibration curves were linear up to 20 mg L⁻¹ and 30 mg L⁻¹ with a detection limit of 0.07 mg L⁻¹ and 0.14 mg L⁻¹ for nitrite and nitrate, respectively. The results exhibit no interference from the presence of large amounts of ions. The method was successfully applied to the speciation of nitrite and nitrate in spiked natural water, wastewater and foodstuff samples. The precision and accuracy of the proposed method were comparable to those of the reference spectrophotometric method.     

Diffusion layer titration of dipyrone in pharmaceuticals at a dual-band electrochemical cell

This paper describes the use of a thin-layered dual-band electrochemical cell operating at flow conditions to determine dipyrone (sodium salt of 1-phenil-2,3-dimethyl-4-methylaminomethanesulfonate-5-pyrazolone) by reaction with electrogenerated iodine. The electrolytic cell consisted of two closely spaced gold electrodes, the upper stream electrode serving as the generator electrode and the downstream electrode working as the collector electrode. A linear dynamic range from 2 to 15 μmol l⁻¹ dipyrone was obtained by using a sample volume of 100 μl, with a detection limit of 1.1 μmol l⁻¹. Standard deviation (S.D.) of 3.4% for 20 repetitive injections of a 40 μmol l⁻¹ dipyrone solution and sampling frequency of 90 h⁻¹ were achieved. The results obtained with the thin-layered dual-band electrochemical cell for dipyrone determination in three different pharmaceutical samples compared well with those found by iodimetry with coulometrically generated iodine.