次级源和误差传感器布放对带弹性障板的充液直管声振复合有源控制的影响*

针对充液管路系统噪声有源控制问题,研究了次级源和误差传感器布放对带弹性障板的充液直管管路系统有源消声与有源消振复合控制效果的影响。基于声固耦合方法建立了带弹性障板的充液直管管路系统的有限元模型,在声激励下对比了次级声源布放对系统有源消声性能的影响,并在组合激励下分析了次级力源、次级声源和误差传感器布放对系统复合有源控制的影响。结果表明,非对称分布的次级声源容易激起管壁振动,进而带动障板振动,导致有源消声效果不佳;采用对称分布的次级声源可使低频段的降噪量提高10 dB以上。复合有源控制可进一步提升全频段的控制效果。通过增加振动误差传感器数量,可使绝大多数频点的降噪量提高1~20 dB不等。此外,在管壁上布放的两圈次级力源的间距小于管壁振动波长的1/4,且都不位于管壁振动节点附近时控制效果更好。     

三电极共面介质阻挡放电的放电特性及诱导气流实验研究

等离子体流动控制激励器由于其响应速度快、激励频带宽、能量损耗低、可靠性强的优势,在航空航天领域的主动流动控制等方面得到了广泛应用.文章提出了一种新型的等离子体气动激励器——三电极共面介质阻挡放电激励器,研究了该激励器电极结构对放电特性和诱导气流速度的影响,并与传统共面介质阻挡放电和沿面介质阻挡放电激励器进行了比较.结果表明:（1）随着激励电压的提高,高压电极和地电极之间先出现了丝状放电并逐渐延伸到第三电极;（2）随着第三电极与高压电极之间的距离增大,诱导气流速率从2.4 m/s下降到0 m/s,而第三电极宽度的变动对诱导气流速度影响可忽略不计;（3）相同外部条件下,该激励器诱导的气流速度小于沿面介质阻挡放电激励器,但高于共面介质阻挡放电激励器.      

稠油油藏高温盐析调剖的孔渗表征方法研究

深层高温油藏在开采过程中,由于近井地带压力变化剧烈,地层水蒸发致使结晶盐析出,进而导致储层孔隙度、渗透率降低.为研究稠油油藏高温盐析调剖的孔渗变化规律,根据盐类溶解/沉淀原理及储层孔隙度渗透率关系和填砂管模型高温盐析实验结果,建立了考虑地层水蒸发、水中氯化钠析出和储层孔渗变化的综合盐析模型.研究结果表明:随着堵剂注入量...     

A Novel Gelatin-Based Sustained-Release Molluscicide for Control of the Invasive Agricultural Pest and Disease Vector Pomacea canaliculata

Pomacea canaliculata, one of the 100 most destructive invasive species in the world, and it is an important intermediate host of Angiostrongylus cantonensis. The molluscicides in current use are an effective method for controlling snails. However, most molluscicides have no slow-release effect and are toxic to nontarget organisms. Thus, these molluscicides cannot be used on a large scale to effectively act on snails. In this study, gelatin, a safe and nontoxic substance, was combined with sustained-release molluscicide and was found to reduce the toxicity of niclosamide to nontarget organisms. We assessed the effects of gelatin and molluscicide in controlling P. canaliculata snails and eggs. The results demonstrated that the niclosamide retention time with 1.0% and 1.5% gelatin sustained-release agents reached 20 days. Additionally, the mortality rate of P. canaliculata and their eggs increased as the concentration of the niclosamide sustained-release agents increased. The adult mortality rate of P. canaliculata reached 50% after the snails were exposed to gelatin with 0.1 mg/L niclosamide for 48 h. The hatching rate of P. canaliculata was only 28.5% of the normal group after the treatment was applied. The sustained-release molluscicide at this concentration was less toxic to zebrafish, which means that this molluscicide can increase the safety of niclosamide to control P. canaliculata in aquatic environments. In this study, we explored the safety of using niclosamide sustained-release agents with gelatin against P. canaliculata. The results suggest that gelatin is an ideal sustained-release agent that can provide a foundation for subsequent improvements in control of P. canaliculata.     

基于主成分原理的多元质量控制图的构造

控制图是从事统计质量管理经常使用的重要工具,经过多年的发展和实践,一元质量控制图业已得到普遍推广,可是如何开展多元质量控制仍有许多问题值得探讨。在这篇文章中,我们着重讨论了基于主成分分析的多元质量控制图的构造,并结合从企业现场采集到的数据给出了具体的应用说明。     

Chen混沌系统的非线性全局同步控制

研究了Chen提出的一个新的混沌系统的混沌同步问题,利用非线性控制方法设计了三种混沌同步控制器,并用李雅普诺夫方法证明了在混沌控制器作用下,驱动、响应混沌系统可以实现全局同步.数值仿真结果表明,所设计的三种混沌控制器都能有效的实现混沌同步,并且具有很强的鲁棒性.     

黑体辐射在工业冶炼金属镍中的应用

本文主要介绍一种金属镍出炉时间的自动控制方法。在冶镍炉上开一个小孔,近似认为是理想黑体,通过光路选择系统将辐射出的光照射在热电偶上,然后将热电偶上的电压信号用运算放大器放大,可以获得温度和电动势之间的关系。通过一个微控制器形成一个闭环的测温和反馈系统,以构成一个实时的控制系统.     

离焦激光直写的线宽稳定方法

为了提高激光直写加工衍射光学元件时的线条质量,提出一种离焦激光直写的线宽稳定方法.该方法通过同时调节激光功率和离焦量,使光刻胶的曝光阈值处于线宽对曝光量的变化率较小位置,从而可以弱化线宽对实际曝光量或光刻胶阈值等变化的敏感度,提高利用离焦方法进行衍射光学元件制作时的线宽稳定性.推导了稳定线宽后的光功率控制模型和线宽模型,模型中的变量仅为离焦量,降低了光功率控制的复杂性.利用632.8 nm的He-Ne激光和NA-0.1的物镜在CCD上对采用该方法后的离焦线宽模型进行验证,实验结果与理论模型吻合较好.该方法对于线宽稳定度较高的衍射光学元件制作具有重要价值.     

Conserved Control Path in Multilayer Networks

The determination of directed control paths in complex networks is important because control paths indicate the structure of the propagation of control signals through edges. A challenging problem is to identify them in complex networked systems characterized by different types of interactions that form multilayer networks. In this study, we describe a graph pattern called the conserved control path, which allows us to model a common control structure among different types of relations. We present a practical conserved control path detection method (CoPath), which is based on a maximum-weighted matching, to determine the paths that play the most consistent roles in controlling signal transmission in multilayer networks. As a pragmatic application, we demonstrate that the control paths detected in a multilayered pan-cancer network are statistically more consistent. Additionally, they lead to the effective identification of drug targets, thereby demonstrating their power in predicting key pathways that influence multiple cancers.     

ACTIVE CONTROL OF A FLEXIBLE CANTILEVER PLATE WITH MULTIPLE TIME DELAYS

Active control of a flexible cantilever plate with multiple time delays is investigated using the discrete optimal control method. A controller with multiple time delays is presented. In this controller, time delay effect is incorporated in the mathematical model of the dynamic system throughout the control design and no approximations and assumptions are made in the controller derivation, so the system stability is easily guaranteed. Furthermore, this controller is available for both small time delays and large time delays. The feasibility and efficiency of the proposed controller are verified through numerical simulations in the end of this paper.