加热炉内板坯粘塑性下桡变形的研究

在加热妒内，由于高温及重力作用，板坯两端的悬臂将产生下桡变形。悬臂越长，下桡将越大，导致悬臂下桡部分与出口端墙相碰，影响出料而造成事故。本文对加热炉内板坯的下桡变形进行了分析计算。首先，建立了板坯的二维非稳态导热模型并用有限差分法计算了炉内板坯随时间的温度变化；然后建立了板坯悬臂粘塑性变形模型，用有限元法计算了高温条件下由重力引起的悬臂的下桡变形。由此理论模型计算出的板坯抽出温度与悬臂端下桡量与实测结果吻合良好，说明该理论模型及模型计算方法是正确的，可用于对装钢生产进行指导。     

Dislocation unpinning model of acoustic emission from alkali halide crystals

The present paper reports the dislocation unpinning model of acoustic emission (AE) from alkali halide crystals. Equations are derived for the strain dependence of the transient AE pulse rate, peak value of the AE pulse rate and the total number of AE pulse emitted. It is found that the AE pulse rate should be maximum for a particular strain of the crystals. The peak value of the AE pulse rate should depend on the volume and strain rate of the crystals, and also on the pinning time of dislocations. Since the pinning time of dislocations decreases with increasing strain rate, the AE pulse rate should be weakly dependent on the strain rate of the crystals. The total number of AE should increase linearly with deformation and then it should attain a saturation value for the large deformation. By measuring the strain dependence of the AE pulse rate at a fixed strain rate, the time constantτ _s for surface annihilation of dislocations and the pinning timeτ _p of the dislocations can be determined. A good agreement is found between the theoretical and experimental results related to the AE from alkali halide crystals.     

Nonparametric estimation and adaptive control in a class of finite Markov decision chains

We consider a class of Markov decision processes withfinite state and action spaces which, essentially, is determined by the following condition: The state space isirreducible under the action of any stationary policy. However, except by this restriction, the transition law iscompletely unknown to the controller. In this context, we find a set of policies under which thefrequency estimators of the transition law are strongly consistent and then, this result is applied to constructadaptive asymptotically discount-optimal policies.Dedicated to Professor Truman O. Lewis, on the occasion of his sixtieth birthdayThis research was supported in part by the Third World Academy of Sciences (TWAS) under Grant TWAS RG MP 898-152, and in part by the Consejo Nacional de Ciencia y Tecnología (CONACYT) under Grant A128CCOEO550 (MT-2).     

Deformation of styrene—divinylbenzene copolymers and hypercrosslinked polystyrenes during solvent adsorption and desorption

An automated procedure was developed for monitoring fast changes in the size of spherical samples of polymers during their contact with a solvent or drying. The kinetics of bulk deformation in these processes was studied for a series of cross-linked polymers, viz., gel-type and porous styrene—divinylbenzene copolymers and poly(divinylbenzenes), and hypercrosslinked polystyrenes. Gel, macroporous, and hypercrosslinked polystyrenes are substantially different in the rate, mechanism, and degree of swelling, which is associated with the principal differences in their physical structures. An unusual effect of a sharp decrease followed by a temporary increase in the volume of porous polystyrene and poly(divinylbenzene) materials were observed during desorption (evaporation) of organic solvents. Water desorption is accompanied by an excessive bulk compression of porous granules giving rise to negative deformations, which gradually relax to the state equilibrium for the dry polymer. The results of dynamic desorption porometry (for water desorption) are indicative of a bimodal size distribution of micropores in hypercrosslinked polystyrene. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 467–476, March, 2007.     

An exponentially fitted special second-order finite difference method for solving singular perturbation problems

An exponentially fitted special second-order finite difference method is presented for solving singularly perturbed two-point boundary value problems with the boundary layer at one end (left or right) point. A fitting factor is introduced in a tri-diagonal finite difference scheme and is obtained from the theory of singular perturbations. Thomas Algorithm is used to solve the system and its stability is investigated. To demonstrate the applicability of the method, we have solved several linear and non-linear problems. From the results, it is observed that the present method approximates the exact solution very well.     

Weighted extended b-splines for one-dimensional electromagnetic problems

This paper considers the weighted extended b-splines as basis function for finite element method in electromagnetics and compares with the standard finite element method applied to the two-point boundary value problems with different boundary conditions. This new approach, which provides more accurate results than standard finite element method, is presented to compare other numerical techniques and applied to one-dimensional electromagnetic problems. Computed results are compared with other numerical results in literature.     

On a free group of transformations defined by an automaton

We prove that three automorphisms of the rooted binary tree defined by a certain 3-state automaton generate a free non-Abelian group of rank 3. Both authors are supported by the NSF grants DMS-0308985 and DMS-0456185. Yaroslav Vorobets is supported by a Clay Research Scholarship.     

The change of the superstructure of semicrystalline polymers during deformation: results from small-angle scattering with synchrotron radiation

The change of the superstructure of different polyethylenes during uniaxial deformation is investigated. The method used is small-angle scattering with synchrotron radiation. For branched polyethylene (Lupolen 1840D) the whole deformation range is analyzed. Beginning with superstructure of the lamellar cluster type, the superstructure partly disappears on a time scale of a few minutes and the fibrillar structure is built up. The degree of destruction and rebuilding depends on the drawing temperature. For very high molecular weight polyethylene (GUR) a reversible change of the superstructure at higher deformation ratios and at different temperatures is observed. The superstructure of (ethylene—hexene) copolymers (TIPELIN) at high draw ratios depends on the drawing temperature and is almost independent of the side group content. Interfibrillar microcracks parallel to the draw direction are produced in samples with a low side group content for draw ratios λ ≥ 1.5.     

关于非线性Pochhammer-Chree方程的解

本文研究了弹性杆纵向形变方程:u_(tt)—u_(ttxx)—u_(xx)—(1/3)(u~3)xx=0的椭圆余弦波解,并用Adomian分解法,求出了其初边值问题解.     

几种约束广义逆矩阵的有限算法

1引言与引理众所周知，关于非奇异方阵的正则逆的有限算法是由Faddeev大给在1949年之前提出的，这就是著名的Faddeev算法[1，P…334-336]。自从五十年代中期广义逆矩阵的研究复兴与发展以来，有不少学者提出了关于广义逆矩阵的有限算法。第一个给出关于广义逆矩