Design of different bandwidth dispersive mirrors

Dispersive mirrors in the wavelength range of 960–1110 nm, 700–900 nm, 950–1150 nm, 600–900 nm, 900–1200 nm, 600–1000 nm and 550–1050 nm are designed, respectively. From the design results, we analyse the choice of material and the approach to dispersion compensation. Furthermore, along with the increase of bandwidth, interaction between group delay dispersion (GDD) oscillation and high reflectivity, and influence of bandwidth on both GDD ripple and reflectivity are discussed.     

Effect of glycine substitution on the ferroelectric phase of betaine arsenate [(CH3)3NCH2COO·H3AsO4]

The present work reports an experimental investigation on the influence of glycine (NH₂CH₂COOH) substitution in the polar properties and the critical dynamics of the molecular ferroelectric betaine arsenate, (CH₃)₃NCH₂COO·H₃AsO₄. The dielectric dispersion (20 Hz<ν<3 MHz) and the thermally induced displacement currents are investigated in detail over the extended Curie region of the system (130 K<T<100 K). The results obtained for a single crystal with nominal glycine content of 20% are analyzed, compared with those obtained for pure betaine arsenate and discussed within the scope of a phenomenological Landau model previously used to describe a system with competing ferroelectric and structural instabilities.     

高温超导体角分辨光电子能谱研究及新进展

本文较详细地评述了高温超导体角分辨光电子能谱研究的所有主要方面的成就及最新进展。所涉及的主题有:角分辨光电子能谱基础知识,费米面的角分辨光电子能谱研究,超导能隙及对称性研究,赝能隙问题的角分辨光电子能谱研究,高温超导体的角分辨光电子能谱谱线形分析,近节点区域准粒子的色散行为,双层能带劈裂。所涉及的材料不仅有最广泛研究的Bi2212,还包括Bi2201,Bi2223,La＿214,Y 123乃至电子型掺杂的超导体。所引用的文献特别注意了从新一代高能量、动量分辨的能量分析器得到的系统、深入的工作。     

具有横向磁晶各向异性的钴纳米线的微波吸收性能

使用电化学脉冲沉积法制备了磁晶各向异性易磁化方向(c轴)垂直纳米线长轴方向的钴纳米线.受到磁晶各向异性、静磁相互作用等因素与形状各向异性相互竞争的结果,纳米线阵列的磁滞回线显示出较弱的磁各向异性.此外,在2—18 GHz频率范围内,纳米线/石蜡复合材料的介电色散谱的虚部在5 GHz处有一个主峰,在10 GHz附近有一个较弱的峰;德拜弛豫特性和材料的电导率对这两个峰的形成均有贡献.同时,其磁导率色散谱的虚部在频率为6.1 GHz处有一个主峰,在10 GHz以上有两个较微弱的峰. 前一个峰源于自 关键词： 钴纳米线 介电色散谱 磁导率色散谱 微波吸收剂     

面心立方金属声子色散曲线的数值模拟

把分析型嵌入原子法（AEAM）和晶格动力学理论相结合,在三维布喇菲晶格振动模型的基础上模拟了面心立方金属Au、Ag、Pt、Cu和Ni沿[00ζ]、[0ζζ]、[ζζζ]和[0ζ1]4个对称方向的声子色散曲线.结果表明：模拟曲线与实验点线符合的较好,特别在低频附近二者几乎一致,而在纵波模（L）q=（001）2π/a,q=...     

金属柱平板慢波系统高频特性研究

对于离散的金属柱结构构建的周期性平板慢波系统,本文利用3维FDTD方法结合HFSS仿真软件深入分析了该慢波系统的高频特性.研究了金属柱高度、周期长度对色散特性的影响,计算了耦合阻抗,并与传统光栅慢波系统特性进行了对比分析.分析表明金属柱慢波系统既有与传统光栅慢波系统相似的高频特性,又具有独自的特点,位于离散的金属柱周期间隙中的电子注互作用耦合阻抗具有对称性;金属柱结构用作真空电子器件的高频系统可增加发生有效互作用的电子注厚度,降低起振电流密度,提高器件效率.本文的分析结果为设计低电流密度工作的多电子注短毫 关键词： 金属柱平板慢波系统 3维FDTD算法 色散特性 耦合阻抗     

只需一个解调器的偏分复用差分相移键控系统实验实现

偏分复用技术是提高系统传输速率的有效方法之一.搭建了被称为双偏振态差分相移键控(Dual-Pol.DPSK)码的新型偏分复用实验系统,它与具有相同的比特波特比的差分正交相移键控(DQPSK)调制方式相比,接收机要简单很多.与传统的偏振分解复用(POLMUX)技术相比,它无需偏振控制或偏振跟踪,只需一个解调器和一个平衡探...     

同轴电介质-金属-电介质结构表面等离激元色散研究

从平面电介质-金属薄膜-电介质对称结构中表面等离激元的色散方程出发,建立模型推导得到了同轴电介质-金属薄膜-电介质结构中表面等离激元的色散方程,在这种结构中各阶模式都发生了分裂,形成了高折射率高损耗和低折射率低损耗的两种模式,该模型为理解同轴电介质-金属薄膜-电介质结构表面等离激元模式的传播提供了直观的图像。用色散方程计算了0.5～1.5μm波长范围内各阶模式的等效折射率以及传输损耗,并将该结果与有限元方法数值模拟得到的结果进行对比分析,分析表明,两者吻合得很好。并分析了计算结果以及色散方程的适用范围。     

Frequency dispersive complex permittivity and permeability of ferromagnetic metallic granular composite at microwave frequencies

We experimentally studied the frequency dependent complex permittivity ε and permeability μ of composite composed of carbonyl iron powder (CIP) and epoxy resin in the frequency range 1-18 GHz. We found that the intrinsic ε and μ of CIP extracted from the measured ε and μ of composites follow the classical Maxwell equations and the Landau-Lifshitz-Gilbert (LLG) equation, respectively. The dependences of ε and μ of composites on the volume fraction of CIP (vf_CIP) were investigated using the two-exponent phenomenological percolation equation (TEPPE). We found that the TEPPE can fit the experimental results very well. Comparing the results of percolation parameters derived by experimental data at different frequencies, we show that the TEPPE is frequency independent for the composites at microwave frequencies. The results also show that the ε and μ spectrums of composites with definite vf_CIP can be correctly calculated by combining the TEPPE with the theoretical models of intrinsic ε and μ.