Mass cultivation of catharanthus roseus cells using a nonmechanically agitated bioreactor

Batch suspension cultures ofCatharanthus roseus G. Don were grown in a 5 L LKB Ultraferm fermenter, converted to operate as an airlift bioreactor, to test the suitability of such a system for the mass culture of plant cells. Results show that the airlift system has considerable merits as a culture vessel for such a purpose, including: conversion rates of carbohydrate substrate to cell mass equivalent to > 50% under optimum conditions. (Operating under these conditions, growth rates of approximately 0.4 d^-1 are typical). In the absence of the mechanical shear normally associated with mechanically driven bioreactors, the gently agitated environment of the airlift vessel proves to be an ideal system for the growth of fragile plant cells. Use of a nozzle sparger reduces the possibility of a high mass transfer coefficient, except at very high gassing rates, thereby eliminating any interference with the growth rate caused by high rates of gaseous exchange.     

Precipitation of lignin and extractives on kraft pulp: effect on surface chemistry, surface morphology and paper strength

The effect of pH on the formation of precipitates (lignin, extractives and metals) on kraft pulp surfaces was examined by electron spectroscopy for chemical analysis, time-of-flight secondary ion mass spectrometry and atomic force microscopy (AFM). A softwood kraft pulp slurry from an oxygen delignification stage was diluted to 3% consistency with water or an acidic Z filtrate. After heating to 70 °C the pH was lowered from 11 to 2–5, using sulphuric acid. Lignin and extractives precipitated at pH values below 6, and their amounts increased with decreasing pH. Most of the precipitated lignin was found on the pulp surface after sheet forming, whereas the main part of the precipitated extractives could be easily washed away with water. The layer of precipitated lignin was apparently thicker than the layer of extractives. AFM showed the precipitated material as a granular phase. Neither surface morphology nor surface coverage depended on the addition of Z filtrate. The amount of metals ID the pulp and on the pulp surface decreased when pH was lowered to 2. More metals, such as Ca and Mg, were detected ID the pulps as well as on the sheet surfaces when the pulp was diluted with Z filtrate. Strength and bonding properties of the pulp sheets were slightly impaired by the precipitated material. Acidification appears to be the main reason for the precipitation of both lignin and extractives on the pulp surfaces. This should be taken into account when filtrates are recycled ID the bleaching or washing of pulps.     

Antibacterial Activity of Clay Soils against Food-Borne Salmonella typhimurium and Staphylococcus aureus

Natural clays have recently been proven to possess antibacterial properties. Effective natural antimicrobial agents are needed to combat bacterial contamination on food contact surfaces, which are increasingly more prevalent in the food chain. This study sought to determine the antibacterial activity of clays against the food-borne pathogens Salmonella typhimurium ATCC 14028 and Staphylococcus aureus ATCC 13565. Soils were processed to yield leachates and suspensions from untreated and treated clays. Soil particle size, pH, cation-exchange capacity, metal composition and mineralogy were characterized. Antibacterial screening was performed on six Malaysian soils via the disc diffusion method. In addition, a time-kill assay was conducted on selected antibacterial clays after 6 h of exposure. The screening revealed that Munchong and Carey clays significantly inhibit Salmonella typhimurium (11.00 ± 0.71 mm) and S. aureus (7.63 ± 0.48 mm), respectively. Treated Carey clay leachate and suspension completely kill Salmonella typhimurium, while S. aureus viability is reduced (2 to 3 log₁₀). The untreated Carey and all Munchong clays proved ineffective as antibacterials. XRD analysis confirmed the presence of pyrite and magnetite. Treated Carey clays had a higher soluble metal content compared to Munchong; namely Al (92.63 ± 2.18 mg/L), Fe (65.69 ± 3.09 mg/L) and Mg (88.48 ± 2.29 mg/L). Our results suggest that metal ion toxicity is responsible for the antibacterial activity of these clays.     

表面活性剂对TiO2水悬浮体稳定及流变性质的影响

在陶瓷的制备过程中,通常需将陶瓷粉末分散于水中形成陶瓷浆后再浇铸成型.研究表明[1],陶瓷浆的分散、稳定及流变性质直接影响到成品的性能.因此,研究分散稳定剂对该浆料性质的影响有着重要意义.本文利用电泳和流变学方法研究了TiO2在表面活性剂的水溶液中浓浆体的分散稳定性及流变性质.     

A chiral axial next nearest neighbour xy-model for antiferroelectric liquid crystals

We describe a chiral axial next nearest neighbour xy-model to account for the various subphases exhibited by antiferroelectric liquid crystals made of chiral rod-like molecules. The assumed form of the interlayer interactions is based on physical processes which are discussed. Using a discrete model, the predicted sequence of transitions is SmA-SmC-SmC-FI_H-FI_I-FI_L-SmC ^* A, where FI stands for a ferriphase, as seen in many compounds. The ferri and SmC phases are characterized by relatively large angles between the c-vectors of successive layers and occur only when the compounds have high optical purity. The calculated field induced structures exhibit a plateau of the apparent tilt angle at , where is the tilt angle of the molecules in the ferriphase. The conoscopic figures in the presence of a field and ellipsometric parameters in the absence of a field have also been generated, which agree extremely well with the experimental results. Recent anomalous X-ray scattering studies prove the xy-character of the configurations, though the commensurate structures that are found in the ferriphase require an extension of the model to include lock-in terms. Received 23 August 1999     

Electric field light scattering by flexible linear polyelectrolytes in aqueous solution

Electric field light scattering results on aqueous solutions of linear, flexible NaPSS at minimal ionic strength are reported. Samples of molecular weights between 356 kg/mol and 2870 kg/mol were investigated. With increasing field strength the intensity as a function of wavenumber develops a pronounced oscillating behaviour. Besides the well-known first peak a second maximum is observed at the position at which a weak maximum for some samples already occurs at zero field. The overall intensity strongly depends on the frequency of the electric field. The electro-optical effect shows a maximum at 300 kHz. Increasing the particle concentration gives a large increase of the peak maximum, normalized to concentration. If plotted versus scattering angle the relative intensity increase is maximum for samples of medium molecular weight. The results strongly indicate a stretching and alignment of the chains, thus leading to or enlarging the short range order of the chains. Received 9 April 1999 and Received in final form 18 August 1999     

Solubility of highly charged anionic polyelectrolytes in presence of multivalent cations: Specific interaction effect

Studies performed on strong polyelectrolytes and on a weak polyelectrolyte, sodium poly(acrylate), show that their stability in presence of multivalent cations depends on the chemical nature of the charged side groups of the polymer. For sulfonate groups (SO₃ ^-) or sulfate groups (OSO₃ ^-) phase separation generally occurs in presence of inorganic cations of valency 3 (as La³⁺) or larger and a resolubilization takes place at high salt concentration. The interactions of the polyelectrolyte with multivalent cations are of electrostatic origin and the phase diagrams are weakly dependent on the chemical nature of the polymer backbone and on the specificity of the counterions. For acrylate groups, (COO^-), the phase separation was observed with inorganic cations of valency 2 (as Ca²⁺) or larger without resolubilization at high salt concentration. The phase separation is due to a chemical association between cations and acrylate groups of two neighboring monomers of the same chain. This chemical association creates a hydrophobic complex by dehydrating both monomer and cation. With organic trivalent cation, as spermidine ⁺H₃N(CH₂)₄NH₂ ⁺(CH₂)₃NH₃ ⁺, where no chemical association occurs with the charged side groups COO^- or SO₃ ^- of the polyelectrolyte, similar phase diagrams were observed whatever was the polyelectrolyte with a resolubilization at high trivalent cation concentration. Received 3 March 1999 and Received in final form 2 September 1999     

稀土掺杂聚苯撑ER流体的研究

选用CeCl4和FeCl3等对自制的对苯撑进行掺杂,将制得的高介电聚苯撑粉末加入到硅油中得到电流变体流体,测量了在电场作用下粘度和漏电流密度,以及相关的物理常数。讨论了电场强度、粒子浓度与粘度和漏电流密度的关系,粘度变化的响应速度和恢复时间,并探讨了其相关机制。     

Lattice-Boltzmann study of spontaneous emulsification

We study the dynamics of spontaneous emulsification of an initially planar oil-water interface when surfactants are added. The thermodynamic properties of the ternary oil-water-surfactant system are modeled by a Ginzburg-Landau-type free energy. The lattice Boltzmann method is used to solve the dynamic equations. The dynamics is found to be governed by a complicated interplay of convection and diffusion as the two relevant transport mechanisms. As long as the interface is almost flat, we find the interfacial area to grow first exponentially and then linearly in time. Later finger-like structures form which grow with a constant velocity. The tip velocity is found to increase roughly linearly with the mobility of the amphiphile, and to decrease as with the solvent viscosity . Received 5 January 1999