The coupling of bem and fem for the two-dimensional viscous flow problem

In this paper we propose a numerical scheme for treating the problem of sJow viscous flow past an obstacle in the plane. This scheme is a combination of boundary element and finite element methods. By introducing an auxiliary boundary curve, we divide the region under consideration into two subregions, an inner and an outer region. In the inner region, we employ a finite element method (FEM) for solving a system of simplified field equations with proper natural boundary conditions. In the outer region, the solution is expressed in the form of a simple-layer potential with density function satisfying a system of modified integral equations of the first kind. The latter are solved by a boundary element method (BEM). Both solutions are matched on the common auxiliary boundary curve. Error estimates in suitable function spaces are derived in terms of the mesh widths as well as the small parameters, the Reynolds numbers     

混合法分析平面应变橡胶材料的大变形

基于混合法 (以位移和静水压力为基本未知量 ) ,引入 Penn[1 ]建议的不变量分解的 Mooney型 [2 ]本构形式 ,针对混合法建立起总刚元素的特点 ,分析平面应变不可压缩橡胶材料的大变形 ,克服以前在处理不可压缩时 ,计算易失稳等缺点 ,算例表明 :有限元计算稳定并与解析解[4] 吻合。     

An FEM approximation for a fourth-order variational inequality of second kind

A fourth-order variational inequality of the second kind arising in a plate frictional bending problem is considered. By using regularization method, the original problem can be formulated as a differentiable variational equation, and the corresponding discrete FEM variational equation is presented afterwards. Abstract error estimates and error estimates of the approximation are derived in terms of energy norm and L^2-norm.     

Superconvergent estimates of conforming finite element method for nonlinear time‐dependent Joule heating equations

In this article, we study the superconvergence analysis of conforming bilinear finite element method (FEM) for nonlinear Joule heating equations. Based on the rigorous estimates together with high accuracy analysis of this element, mean value technique and interpolation postprocessing approach, the superclose and superconvergent estimates about the related variables in H¹‐norm are derived for semidiscrete and a linearized backward Euler fully discrete schemes, which extends the results of optimal estimates obtained for conforming FEMs in the previous literature. At last, a numerical experiment is performed to verify the theoretical analysis.     

点式压电智能结构的模型修正与振动主动控制

提出了在点式压电智能结构中应用摄动有限元方法对结构的有限元模型进行修正 ,从而达到提高建模精度 ,改善实际结构振动主动控制效果的目的。通过对一悬臂梁在模型修正前后进行振动主动控制的不同的控制效果验证了该方法的有效性     

Dynamics of Multi-Body Rotors: Numerical and Experimental FEM Analysis of the Scientific Earth Experiment Galileo Galilei Ground

Some small scientific satellites can be regarded as free, multi-body, supercritical and statorless rotors. Classical rotordynamics does not cover the dynamic behaviour and the stability analysis of such rotating systems, being focused on fixed rotors. Attitude dynamics usually deals with single rigid spacecrafts, sometimes equipped with flexible appendices like solar arrays or antennas. The case of the Galileo Galilei Ground (GGG) test facility is herewith analyzed through a numerical and experimental investigation on the dynamic behaviour of a fixed multi-body fast-spinning rotor in order to validate the design approach proposed for Galileo Galilei (GG) spacecraft.     

压电材料椭圆切口的力学分析

在线性压电本构方程框架下，用复势函数方法对椭圆切口模型进行了精确的数值计算。完整地考虑了各向异性力电耦合效应以及切口内不同电介质的介电性质。给出了切口内部不同介电性质对压电材料内部应力的影响。指出了Sosa文章里的一些计算错误。由于现在文献中很少有关于电导通边界条件下理论解的数值结果，所以本文同时提供了不同电边界条件下理论解的数值结果，所以本文同时提供了不同电边界条件下的理论解的数值结果。最后通过最小势能原理建立了8结点有限元模型，对椭圆切口问题进行了计算并与理论解进行了仔细比较。     

用均匀化理论分析蜂窝结构的等效弹性参数

在线弹性范围内,根据均匀化理论,并结合有限元方法推导出适用于二维周期性结构的均匀化的有限元格式（Homo FEM）,计算出不同相对密度下的规则蜂窝结构的等效弹性模量Ee和泊松比νe.同时,利用蜂窝结构的代表胞元模型,用常规的有限元方法（FEM）模拟计算出相应的等效弹性参数.最后将两种数值计算结果与己有的理论公式进行了比较和分析讨论.结果表明:在考察的相对密度全场范围内（0～0.4）,HOmO FEM得到的蜂窝结构的 Ee和νe 与 FEM使用平面实体单元模拟计算得到的结果一致吻合,反映出 Homo FEM数值方法的客观准确性和可行性.而 Gibson公式和 W-K得到的等效弹性模量值 Ee只是在较小相对密度的情况下（小于0.15）与数值计算结果吻合.当结构的相对密度较大时,必须考虑胞棱附近区域由应力集中导致的复杂的应力和应变分布的影响.     

SiC粒子非均布引起铝基复合材料的损伤分析

 根据电镜断面考察结果，以Gurson模型为本构方程的有限单元 法对包体模型及三维非均匀模型进行了详细分析. 为了评价应力-应变 关系及损伤的主要因素，考虑了基体中SiC粒子的体积率和径比的非均 匀分布. 其结果表明，用这种非均匀模型能很好地仿真铝基体在大量塑 性变形之后所发生的韧窝破坏过程. SiC粒子体积率、径比及其位置的 非均匀性，对局部和整体损伤过程与应力-应变关系的影响相当大. 当 Sic粒子径比为1.0，并在基体中均匀分布时，断裂应变会大幅度增大.     

三维非线性有限元与弹性边界元耦合数值方法

本文系统地讨论了以下三个问题:(1) 有限元与边界元耦合中的几个数值问题,其中包括:边界积分方程的凝聚、等效刚度矩阵的对称化及面力不连续的处理;(2) 弹塑性有限元与弹性边界元的耦合;(3) 弹粘塑性有限元与弹性边界元的耦合及数值计算稳定性条件。