Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Simultaneous quantitation of rosuvastatin and gemfibrozil in human plasma by high-performance liquid chromatography and its application to a pharmacokinetic study

A simple, sensitive and specific high-performance liquid chromatography method is described for simultaneous determination of rosuvastatin (RST) and gemfibrozil (GFZ) in human plasma using celecoxib as an internal standard (IS). The assay procedure involved extraction of RST, GFZ and IS from plasma into acetonitrile. Following separation and evaporation of the organic layer the residue was reconstituted in the mobile phase and injected onto an X-Terra C(18) column (4.6 x 150 mm, 5.0 microm). The chromatographic run time was less than 20 min using flow gradient (0.0-1.60 mL/min) with a mobile phase consisting of 0.01 M ammonium acetate:acetonitrile:methanol (50:40:10, v/v/v) and UV detection at 275 nm. Nominal retention times of RST, GFZ and IS were 6.7, 13.9 and 16.4 min, respectively. Absolute recovery of both analytes and IS was greater than 90%. The lower limit of quantification (LLOQ) of RST and GFZ was 0.03 and 0.30 microg/mL, respectively. Linearity was excellent (r(2) = 0.999) in the 0.03-10 microg/mL and 0.3-100 microg/mL ranges for RST and GFZ, respectively. The inter- and intra-day precisions in the measurement of RST quality control (QC) samples 0.03, 0.09, 2.50 and 8.00 microg/mL were in the range 2.37-9.78% relative standard deviation (RSD) and 0.92-10.08% RSD, respectively. Similarly, the inter- and intra-day precisions in the measurement of GFZ quality control (QC) samples 0.30, 0.90, 25.0 and 80.0 microg/mL were in the ranges 2.79-6.27 and 0.96-9.69% RSD, respectively. Accuracies in the measurement of QC samples for RST and GFZ were in the range 85.43-107.23 and 84.98-102.35% respectively, of the nominal values. RST and GFZ were stable in the array of stability studies viz., bench-top, auto-sampler and freeze-thaw cycles. Stability of RST and GFZ was established for 1 month at -80C. The application of the assay in an oral pharmacokinetic study in rats co-administered with RST and GFZ is described.     

Simultaneous analysis of several synthetic cannabinoids,THC, CBD and CBN,in hair by ultra‐high performance liquid chromatography tandem mass spectrometry. Method validation and application to real samples

A simple procedure for the quantitative detection of JWH‐018, JWH‐073, JWH 200, JWH‐250, HU‐210, Δ⁹‐tetrahydrocannabinol (THC), cannabidiol (CBD) and cannabinol (CBN) in hair has been developed and fully validated. After digestion with NaOH and liquid–liquid extraction, the separation was performed with an ultra‐high performance liquid chromatography system coupled to a triple quadrupole mass spectrometer operating in the selected reaction monitoring mode. The absence of matrix interferents, together with excellent repeatability of both retention times and relative abundances of diagnostic transitions, allowed the correct identification of all analytes tested. The method was linear in two different intervals at low and high concentration, with correlation coefficient values between 0.9933 and 0.9991. Quantitation limits ranged from 0.07 pg/mg for JWH‐200 up to 18 pg/mg for CBD The present method for the determination of several cannabinoids in hair proved to be simple, fast, specific and sensitive. The method was successfully applied to the analysis of 179 real samples collected from proven consumers of Cannabis, among which 14 were found positive to at least one synthetic cannabinoid. Copyright © 2012 John Wiley & Sons, Ltd.     

重量法测定土壤水溶性盐总量的优化

土壤水溶性盐是表征土壤盐碱化程度的重要指标,也是评价耕地地力的重要参数,被纳入第三次全国土壤普查（“三普”）监测指标体系中。重量法是测定土壤水溶性盐总量的最常用方法,其测定过程易受多种因素影响,导致其测定结果不准。鉴于此,本文设计试验分别验证了水溶性盐浸提和浸提液固液分离这两个过程对测定结果的影响,结果表明浸提液固液分离是影响土壤水溶性盐总量测定准确度和精密度的主要因素。基于此进一步探究4种不同固液分离方式（布氏漏斗过滤、滤膜真空抽滤、离心、滤纸组合过滤）对测定结果的影响,结果表明相较于其它方式,滤纸组合过滤测定结果准确度高,适用于土壤水溶性盐总量的测定。对改进后的重量法测定土壤水溶性盐总量进行方法学确认,结果表明其检出限为0.01 g/kg,测定下限为0.04 g/kg;方法的准确度和精密度、适用范围等均符合相关要求。本文推荐的土壤水溶性盐总量测定方法为：土壤样品采用1:5土水比浸提,180 r/min振荡3 min,浸提液采用滤纸组合自然过滤;其测定结果的准确度和精密度符合相关要求。本文旨在为“三普”内业检测提供参考和借鉴,为全面摸清不同区域土壤水溶性盐含量水平及土壤盐渍化程度提供技术支撑。     

应用超高效液相色谱-四极杆-飞行时间质谱建立茶叶中农药残留的筛查与确证方法

基于超高效液相色谱-四极杆-飞行时间质谱(UPLC-QTOF-MS),使用UNIFI软件建立91种农药残留的筛查与确证方法,进行定性方法验证并应用于流通市场中茶叶的筛查检测。通过对收集的农药认证标准物质(CRM)分析,构建91种农药化合物的质谱数据库。样品经乙腈提取,固相萃取柱净化,Acquity BEH C18色谱柱分离,在MS^E模式下进行全信息采集(ESI+), UNIFI软件对数据进行匹配分析。设置保留时间最大偏差为±0.1 min,精确质量偏差阈值为±5×10^-6,可识别加合物形式包括[M+H]⁺、[M+Na]⁺、[M+K]⁺、[M+NH₄]⁺。参照SANTE/11813/2017指南进行定性方法学验证。在21份茶叶样品中添加混合标准溶液至4个水平(0.01、0.05、0.10、0.20 mg/kg),确定每种农药在茶叶样品中的筛查检出限(SDL),共评估了1911种农药/样品组合。发现有66种农药的SDL为0.01 mg/kg, 8种农药的SDL为0.05 mg/kg, 1种农药的SDL为0.10 mg/kg, 3种农药的SDL为0.20 mg/kg,共有13种农药的SDL大于0.20 mg/kg。一种农药在筛查检测中存在基质抑制效应。最后,应用建立的方法分析了流通市场中22份茶叶样品的农药残留情况,从6份茶叶样品中筛查检测出6种农药化合物,经人工鉴定均为阳性。该法为茶叶中农药残留的高通量筛查检测提供了参考。     

化学分析方法验证和确认的应用研究

分析方法的验证/确认是实验室引进新方法时必做的工作,也是实验室技术工作的重点和难点之一。对实验室采用分析方法的验证和确认工作进行归纳总结,详述了分析方法选择性、测量范围、线性范围、检出限和定量限、精密度、准确度的验证/确认方法及结果判定方式。适用于实验室引进的标准方法(包括标准变更)和非标准方法(实验室设计/制定的方法、超出预定范围使用的标准方法、扩充和修改过的标准方法)的验证和确认。     

多方位做好实验辅助提升教学质量

以实验技术人员的视角,从不同实验环节出发,全面总结实验辅助工作,并提炼为实验辅助大三部曲和小三部曲。该方面的工作体系源于实验室开设的"化学生物学综合实验",反哺了实验室多门实验课程,取得了良好的效果,促进了实验教学质量的提升,同时也为环境育人创造了有利的条件。     

核实数据下响应变量缺失的线性EV模型经验似然推断

考虑响应变量随机缺失而协变量带有误差的线性模型,借助于核实数据和借补方法,构造了回归系数的两种经验似然比,证明了所提出的估计的经验对数似然比渐近于一个自由度为1的独立χ2变量的加权和;而经调整后所得的调整经验对数似然比渐近于自由度为p的χ2分布,该结果可以用来构造未知参数的置信域.此外,我们也构造了响应均值的调整经验对数似然比统计量,并证明了所提出的统计量渐近于x2分布,可用此结果构造响应均值的置信域.通过模拟研究比较了置信域的精度及其平均区间长度.     

Development of Improved High-Performance Liquid Chromatography Method for the Determination of Residual Caprylic Acid in Formulations of Human Immunoglobulins

Quality control of human immunoglobulin formulations produced by caprylic acid precipitation necessitates a simple, rapid, and accurate method for determination of residual caprylic acid. A high-performance liquid chromatography method for that purpose was developed and validated. The method involves depletion of immunoglobulins, the major interfering components that produce high background noise, by precipitation with acetonitrile (1:1, v/v). Chromatographic analysis of caprylic acid, preserved in supernatant with no loss, was performed using a reverse-phase C18 column (2.1 × 150 mm, 3 μm) as a stationary phase and water with 0.05% TFA–acetonitrile (50:50, v/v) as a mobile phase at a flow rate of 0.2 mL/min and run time of 10 min. The developed method was successfully validated according to the ICH guidelines. The validation parameters confirmed that method was linear, accurate, precise, specific, and able to provide excellent separation of peaks corresponding to caprylic acid and the fraction of remaining immunoglobulins. Furthermore, a 2⁴⁻¹ fractional factorial design was applied in order to test the robustness of developed method. As such, the method is highly suitable for the quantification of residual caprylic acid in formulations of human immunoglobulins for therapeutic use, as demonstrated on samples produced by fractionation of convalescent anti-SARS-CoV-2 human plasma at a laboratory scale. The obtained results confirmed that the method is convenient for routine quality control.