Sorbent trapping solid-phase microextraction of fragrance allergens in indoor air

Exposure to fragrance substances is exponentially increasing in our daily life due to the enhanced use of scented products. Some fragrances are known to be important sensitizers, inhalation being an important exposure pathway in indoor environments. A simple and sensitive method based on solid-phase enrichment and solid-phase microextraction (SPME) followed by gas chromatography–mass spectrometry (GC–MS) has been developed for the analysis of 24 volatile fragrance allergens in indoor air. Suspected allergens present in the air (0.2 m³) were adsorbed onto a very small quantity of florisil (25 mg) and then transferred to a SPME fiber in the headspace mode (HS). To the best of our knowledge, this paper describes the first application of SPME for the determination of these compounds in air samples. The experimental parameters affecting the microextraction process have been optimized using a multifactor experimental design strategy. Accuracy, linearity, precision and detection limits (LODs) were evaluated to assess the performance of the proposed method. External calibration, using spiked sorbent standards, and not requiring the complete sampling process (only the SPME step), demonstrated to be suitable for the quantification of all suspected allergens. Recovery studies were performed at three concentration levels (0.04, 1.00 and 50 μg m⁻³), obtaining quantitative recoveries (≥85%) in most cases. LOD values at the low ng m⁻³ level were achieved for all the target compounds. The application of the method to daily home air samples demonstrated the ubiquity of this kind of fragrance ingredients in quotidian indoor environments, finding 18 of the 24 considered compounds in concentrations ranging from 0.01 to 56 μg m⁻³. Benzyl alcohol, linalool, citronellol, ionone and lilial were found in most analyzed samples.     

Development of a solid phase dispersion-pressurized liquid extraction method for the analysis of suspected fragrance allergens in leave-on cosmetics

A new method based on solid phase dispersion-pressurized liquid extraction (PLE) followed by gas chromatography-mass spectrometry (GC-MS) has been developed for the determination of 26 suspected fragrance allergens (all the regulated in the EU Cosmetics Directive amenable by GC, as well as pinene and methyleugenol) in cosmetic samples. The effects of the temperature, extraction time and solvent, and dispersing sorbent, affecting the whole proposed procedure, have been evaluated using a multifactor strategy. The optima conditions after the analysis of main and second order effects entailed the extraction at 120°C for 15 min, using hexane/acetone as solvent, and florisil as dispersing sorbent. The method performance has been studied, showing good linearity (R≥0.996) as well as good precision (RSD≤10%). Detection limits (S/N=3) ranged from 0.000001 to 0.0002% (w/w), values far below the established restrictions as regard labelling in the European Cosmetics Regulation. Reliability was demonstrated through the quantitative recoveries of all the studied compounds. The absence of matrix effects allowed quantification of the compounds by calibration with standard solutions. The analysis of 10 samples (several moisturizing and anti-wrinkle creams and lotions, hand creams, and sunscreen and after-sun creams), covering very different matrices, showed the presence of suspected allergens in all the analyzed samples; in fact, half of the samples contained an elevated number of them. Although the ubiquity of these compounds was demonstrated, labelling was in all cases in consonance with the European Cosmetics Regulation.     

Effect of Temperature and Composition on the Density and Viscosity of Binary Mixtures of Ionic Liquid with Alcohols

Density and viscosity were determined for the binary mixtures containing the ionic liquid 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]) and 1-alcohols (1-butanol, 1-pentanol and 1-hexanol) at six temperatures (298.15, 308.15, 318.15, 328.15, 338.15 and 348.15) K and ambient pressure. The density and viscosity correlation for these systems was tested by an empirical second-order polynomial and by the Vogel-Fucher-Tammann equation in wide ranges of temperatures. Excess molar volumes were described by the Redlich-Kister polynomial expansions. The density and viscosity variations with composition were described by polynomials. A qualitative analysis of the trend of the properties with solvent and temperature was performed. The obtained results indicate that ionic liquid interactions with 1-alcohols are strongly dependent on the special trend of packing of this ionic liquid into hydroxylic solvents. As previously observed, an increase of the 1-alcohol carbon-chain length leads to lower interactions on mixing. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

On the uncertainty of CFD in sail aerodynamics

A verification and validation procedure for yacht sail aerodynamics is presented. Guidelines and an example of application are provided. The grid uncertainty for the aerodynamic lift, drag and pressure distributions for the sails is computed. The pressures are validated against experimental measurements, showing that the validation procedure may allow the identification of modelling errors. Lift, drag and L₂ norm of the pressures were computed with uncertainties of the order of 1%. Convergence uncertainty and round‐off uncertainty are several orders of magnitude smaller than the grid uncertainty. The uncertainty due to the dimension of the computational domain is computed for a flat plate at incidence and is found to be significant compared with the other uncertainties. Finally, it is shown how the probability that the ranking between different geometries is correct can be estimated knowing the uncertainty in the computation of the value used to rank. Copyright © 2013 John Wiley & Sons, Ltd.     

Gravitational-wave research with resonant antennas

Summary A brief historical survey of the GW experiments is presented. In particular, the experiments with resonant detectors are illustrated and the problems arising when comparing data of different detectors for the search of coincidences are discussed. The experimental results so far obtained are shown, among them the correlation during the SN1987A with various GW and neutrino detectors. Finally a warning for the long times needed to improve the sensitivity of the GW detectors is given and the improvements expected with spherical resonant detectors are mentioned.     

水下目标高分辨方位估计特征分解法的C30硬件实验研究

高分辨方位估计特征分解法是一类性能良好的方法，本文从水下阵列信号处理的实际应用出发，对这类方法进行了C30硬件实验研究，所得结果为高分辨技术的实际应用提供了重要依据文中构造了高分辨方位估计的C30硬件实验系统；并实现了高分辨方位估计的Pisarenko法、MUSIC法、Johnson法和最小摸（Mininorm）法；对高分辨实验系统进行了仿真实验和消声水池实验，并测试了各特征分解法的运行时间．结果表明，高分辨C30实验系统表现了良好的方位估计统计性能和实时性能     

Sonic spray ionization interface for liquid chromatography-mass spectrometry

A sonic spray ionization (SSI) interface for liquid chromatography-mass spectrometry (LC-MS) analysis was optimized for analysis of 2-[(1R)-3-[bis(1-methylethyl)amino]-1-phenylpropyl]-4-methyl-phenol (tolterodine), used as a model drug substance, and the influence of different parameter settings was evaluated using factorial design. A comparison between SSI and electrospray ionization (ESI) was made for tolterodine, tolterodine metabolites, and a set of steroids.SSI was found to give slightly poorer repeatability and broader peaks for tolterodine compared to ESI. However, there was no significant difference in chromatographic peak shape, and the repeatability using SSI was similar to that obtained using ESI if a ratio (area of tolterodine/area of metabolite) was used. In this study, the sensitivity was higher using SSI. For the analysis of pregnanolone, less water loss was obtained using SSI, probably due to less energy being transferred to the analyte upon ionization.     

Experimental constants, characterizing the process of a plasma polymer modification

In the following paper, empirical constants are determined by a plasma-chemical model and experimental data of the wetting contact angle. The constants characterize the alteration of the contact angle as a function of the time of the polymer treatment and the kind of the plasma-creating gas. The presented equations of the model connect the contact angle with the empirical constants for arbitrary time intervals of treatment and arbitrary percentage content of the researched gas mixtures and gasses. The chemical rate constants, which describe the process of the plasma modification of the polymer material, are determined.     

Fluid Dynamics at Connections in Paediatric Cardiac Surgery*

The modified Blalock-Taussig shunt is a connection created between the systemic and pulmonary arterial circulations to improve pulmonary perfusion in children with congenital heart diseases. Survival of these patients is critically dependent on blood flow distribution between the pulmonary and systemic circulations, that in turn depends upon the fluid dynamic behaviour of the shunt. Computational fluid dynamics, structural analyses as well as in vitro experiments were carried out to derive a quantitative relationship between the shunt flow and the corresponding pressure drop. While computational fluid dynamics simulations were based on the assumption of rigid wall for the shunt and the arteries, proper distensible conduits were used in the in vitro study and the structural analysis of the anastomosis deformation. The results indicated that the internal pressure combined with wall distensibility modifies the cross-sectional area of the distal anastomosis (between the shunt and the pulmonary artery). This fact affects the pressure drop across the shunt, especially at low pressures. Based on the results from the computational analyses and the in vitro experiments, a relationship between pressure drop and flow in the shunt was obtained, which matches data from clinical measurements.