真空冷却过程中实验条件对真空冷却速率的影响

以熟肉为实验材料,对实验条件对真空冷却速率的影响进行了理论分析和实验研究。实验结果表明:真空室有效容积越小、真空泵抽速越高,则真空冷却时间就会越短;冷阱温度对真空冷却速率有着明显的影响;当真空室内的最终压力在0.4～0.61kPa变化时,熟肉的表面温度一直在0℃以上,其真空冷却的时间随着真空室内压力的升高而增加。而真空室内的最终压力在0.3kPa左右时,熟肉的表面温度在真空冷却过程会低于0℃。     

Application of the finite point method to high‐Reynolds number compressible flow problems

In this work, the finite point method is applied to the solution of high‐Reynolds compressible viscous flows. The aim is to explore this important field of applications focusing on two main aspects: the easiness and automation of the meshless discretization of viscous layers and the construction of a robust numerical approximation in the highly stretched clouds of points resulting in such domain areas. The flow solution scheme adopts an upwind‐biased scheme to solve the averaged Navier–Stokes equations in conjunction with an algebraic turbulence model. The numerical applications presented involve different attached boundary layer flows and are intended to show the performance of the numerical technique. The results obtained are satisfactory and indicative of the possibilities to extend the present meshless technique to more complex flow problems. Copyright © 2014 John Wiley & Sons, Ltd.     

婴儿湿巾缓冲能力的测试——一个贴近生活的实验

为了有效提升学生在缓冲溶液学习过程中的学习兴趣及积极性,在此推荐一个将现实中的生活用品作为实验对象引入实验课教学过程中的案例。该实验设计将性质实验扩充到婴儿湿巾,将实验内容变为对婴儿湿巾工作原理的验证,而不再是过去简单的酸碱体系的配制及相关验证实验。通过该实验的实施,学生普遍反映能够有效激发其在学习缓冲溶液相关课程中的学习积极性与兴趣,并最终促使学生认知缓冲体系内pH变化的特点及缓冲机理。     

Dynamic leg-motion and its effect on the aerodynamic performance of cyclists

In this wind-tunnel based experimental study, the flow topology of the near wake of a generic anatomically accurate model cyclist is mapped for a range of reduced pedalling frequencies. Wake flow fields for both static leg and pedalling cyclists are compared over the full 360° rotation of the crank using both time- and phase-averaging. The primary wake flow structures and aerodynamic forces are quantified and analysed under dynamic pedalling conditions representative of an elite-level time-trial cyclist. Over the range of reduced pedalling frequencies studied, only minor variation was detected between the instantaneous drag and primary vortical structures of a pedalling cyclist compared to a stationary cyclist with the pedals in the same position. A simplified model of the aerodynamic forces acting on the legs under motion is presented to provide insight into how the motion of the legs influences aerodynamic drag. A comparison of predicted forces from this model with those from experiments provides a new perspective on how the aerodynamics of cyclists may be optimised.     

Evaluation of RBFs for volume data interpolation in CFD

A greedy method for choosing an optimum reduced set of control points is integrated with RBF interpolation and evaluated for the purpose of interpolating large‐volume data sets in CFD. Given a function defined at a set of points, the greedy method selects a small subset of these points that is sufficient to keep the interpolation error at all the remaining points below a chosen bound. This is equivalent to a type of data compression and would have useful storage, post‐processing, and computational applications in CFD. To test the method in terms of both the point selection scheme and the suitability of reduced control point volume interpolation, a trial application of the interpolation to velocity fields in CFD volume meshes is considered. To optimise the point selection process, and attempt to be able to capture multiple length scales, a variable support radius formulation has also been included. Structured and unstructured mesh cases are considered for aerofoils, a wing case and a wing‐body case. For smooth volume functions, the method is shown to work well, producing accurate velocity interpolations using a very small number of the cells in the mesh. For general complex fields including large gradients, the method is still shown to be effective, although large gradients require more interpolation points to be used.Copyright © 2013 John Wiley & Sons, Ltd.     

The Challenge of Functional Magnetic Resonance Imaging

Abstract

Functional magnetic resonance imaging of the human brain in action presents large statistical and computational challenges. Here we describe those challenges and provide references to a number of other papers where detailed methods developed to meet them are reported. The first seven sections of this paper were written in 1995 when our work was in its infancy. The last four sections were written more recently, to update the earlier sections and to show the directions we have gone and the directions we intend to go.     

Energy harvesting from a magnetic levitation system

Numerical and experimental studies of a magnetic levitation harvester are presented in the paper. The idea is based on the motion of permanent cylinder magnet in a coil exploited for energy harvesting. The novel model is based on a new definition of the coupling coefficient (inductive coefficient) which relates mechanical and an electrical components. The performed static and dynamics experimental tests show that this coefficient is a nonlinear function of the magnet position, and highly depends on the magnet coordinate in the coil, in such a way that the maximum energy is obtained in a coil ends. The comparison between classical – fixed value model – and novel nonlinear model of the inductive coefficient is presented for selected cases. The most essential differences are presented.     

Effects of experimental variables on PMMA nano-indentation measurements

This work aims to investigate the effects of experimental variables on nano-indentation measurements on PMMA. A wide range of conditions, including different load levels, loading rates, holding times and unloading rates were employed to examine the sensitivity of nano-indentation measurements to the selected experimental variables. The test results indicate that the elastic modulus and hardness of PMMA are approximately load-level invariant. However, they are sensitive to the loading rate, holding time and unloading rate. Both elastic modulus and hardness increase with increasing loading rate, while increasing holding time leads to decreasing elastic modulus and hardness. Moreover, the unloading rate has almost no obvious effect on the hardness of PMMA, while the opposite is true for elastic modulus.     

Energetics of aminomethylpyrimidines: An examination of the aromaticity of nitrogen heteromonocyclic derivatives

The standard (p^o = 0.1 MPa) molar enthalpies of formation, in the gaseous phase, at the reference temperature of 298.15 K, of 2-amino-4-methylpyrimidine ((98.1 ± 1.6) kJ · mol⁻¹), 2-amino-4,6-dimethylpyrimidine ((55.9 ± 1.8) kJ · mol⁻¹) and 4-amino-2,6-dimethylpyrimidine ((60.1 ± 1.8) kJ · mol⁻¹) were calculated from the enthalpies of formation, in the crystalline phase, and enthalpies of sublimation, derived, respectively, from static bomb combustion calorimetry and Knudsen effusion technique results. In order to quantify the resonance effects arising from the substitution on the pyrimidine ring, hypothetical isodesmic reactions were used to analyze the experimental gaseous-phase enthalpies of formation. The aromaticity of benzene, pyridine, pyrimidine and the substituted pyrimidines was investigated in terms of magnetic (NICS), geometric (HOMA), electronic (Shannon aromaticity, QTAIMs ring critical point properties and HOMO–LUMO gap), reactive (hardness), vibrational (Kekulé mode) and spectroscopic (UV–Vis) properties.     

模型多肽Trp-Cage折叠形成机制的研究进展

蛋白质折叠是目前结构生物学领域的核心问题之一, 理解蛋白质结构折叠机制及其与生物功能之间的相互关系一直是生命科学家非常重要的研究内容, 并且该研究受到越来越多不同学科领域研究工作者的高度重视. 蛋白质大多数在数十毫秒、微秒或几秒内完成自我折叠过程, 但其折叠过程中所发生的分子结构精细转变却在纳秒甚至更短时间尺度内完成. 由于其折叠时间分辨率的限制, 目前无论是从常规实验还是理论计算角度对其研究都存在一定的难度. 本文首先概述了蛋白质折叠研究在实验和理论模拟方面存在的一些问题,然后以结构典型且可快速折叠的人工设计多肽Trp-cage为例,主要对其折叠过渡温度、折叠形成模型及其肽链上关键氨基酸残基在折叠过程中的作用三个方面进行了详细讨论, 综述了模型多肽Trp-cage的折叠动力学行为分别在实验和理论模拟方面的研究进展. 最后就如何有效化解蛋白质残基间相互作用网络进而降低其折叠机制的复杂性提出了一些新的建议, 不仅有助于阐明该迷你蛋白Trp-cage快速折叠、稳定形成的驱动力成因, 而且也能为蛋白质折叠机制研究和多肽设计提供有益参考.