防护林带：湍流的数学模型与计算机模拟

虽然防护林用于减小风速、控制热量和水汽传递及污染物扩散、 改善气候与环境、增加作物产量等已经有几百年了, 但直到近几十年, 人们才开始系统地研究防护林空气动力学的遮蔽机制.在本综述中,我 们考察了绕防护林带的流动与湍流控制机制,最新的模型与数值模拟 研究情况;通过数值模拟与实验数据的比较,来了解防护林带结构与防 风效果之间的关系;讨论数值分析如何及为什么能够得到所需要的结果. 本文将从多孔隙防护林带流动基本方程组的推导开始,讨论数值模型及 模拟过程,对附体与分离流动进行预测;分析了遮蔽机制与动量交换;对 风向、防护林密度、宽度和三维性对流动与湍流的影响作了系统的论 述.还对热流和土壤水分蒸发的新模型及数值模拟作了简述.最后,我们 对网络工作站、群和高性能分布式并行计算机及其对防护林带模型预 报能力的提高作了讨论.     

In-tube magnetic solid phase microextraction of some fluoroquinolones based on the use of sodium dodecyl sulfate coated Fe3O4 nanoparticles packed tube

In-tube magnetic solid phase microextraction (in-tube MSPME) of fluoroquinolones from water and urine samples based on the use of sodium dodecyl sulfate (SDS) coated Fe₃O₄ nanoparticles packed tube has been reported. After the preparation of Fe₃O₄ nanoparticles (NPs) by a batch synthesis, these NPs were introduced into a stainless steel tube by a syringe and then a strong magnet was placed around the tube, so that the Fe₃O₄ NPs were remained in the tube and the tube was used in the in-tube SPME-HPLC/UV for the analysis of fluoroquinolones in water and urine samples. Plackett–Burman design was employed for screening the variables significantly affecting the extraction efficiency. Then, the significant factors were more investigated by Box–Behnken design. Calibration curves were linear (R² > 0.990) in the range of 0.1–1000 μg L⁻¹ for ciprofloxacin (CIP) and 0.5–500 μg L⁻¹ for enrofloxacin (ENR) and ofloxacin (OFL), respectively. LODs for all studied fluoroquinolones ranged from 0.01 to 0.05 μg L⁻¹. The main advantages of this method were rapid and easy automation and analysis, short extraction time, high sensitivity, possibility of fully sorbent collection after analysis, wide linear range and no need to organic solvents in extraction.     

高分子材料加工实验一体化建设与实践

为了更好地培养学生的实践能力和科研能力,池州学院化学与材料工程学院对高分子材料加工实验进行整合和改革,从加强基础实验教学、优化实验项目、强化学生主体性及相应的考核机制四个方面入手,对高分子材料专业加工实验进行了一体化项目建设并开展教学实践。强化了学生的实际实验操作技能,提高了教科研项目中学生的参与度,培养了学生的科研能力。基本达到和实现了实验教学改革设定的目标。文章同时总结了在一体化项目教学实践中遇到的一些问题,并提出了教科研相结合的深化改革方向。     

Minimization of the Wing Airfoil Drag Coefficient Using the Optimal Control Method

The problem of designing a wing airfoil starting from the surface velocity (or pressure) distribution, given in multi-parameter form, is considered. In the diffuser region, the velocity decrease law is determined from the conditions of minimum drag and separationless flow for a given Reynolds number. The case of boundary layer suction for the purpose of improving the aerodynamic characteristics of the airfoil is studied. A solution is obtained using optimal control theory.     

Experimental evidence of non-standard bifurcations in non-smooth oscillator dynamics

Analytical and experimental investigations are performed in order to characterize the dynamic behaviour of a non-smooth rotational oscillator, which exhibits multiple discontinuity boundaries in the phase space. The physical system consists of a rotating body subjected to an elastic restoring force and in contact with one or two rough discs rotating with constant driving velocities. The presence of multiple discontinuity boundaries caused by frictional contacts leads to non-standard bifurcations that are studied by means of a simple mechanical model.A test set-up has then been built to investigate the correctness of modelling of the friction force and the validity of the proposed model for technical applications: the experimental measurements qualitatively and quantitatively capture the basic scenarios anticipated by the model while a strong robustness of the phenomena pointed out by the theoretical analyses has been revealed in the experiments.     

In search of physical parameters influenced by flow patterns in a heterogeneous two-phase mixture in microchannels using concomitant measurements

Space transportation systems require high-performance thermal protection and fluid management for systems ranging from cryogenic fluid devices to primary structures, and for propulsion systems exposed to extremely high temperatures, and other space systems, e.g., integrated circuits and cooling/environment control devices for advanced space suits. Although considerable developmental effort is underway to bring promising technologies to a readiness level for practical use, new and innovative methods are still needed. One such method is the Advanced Micro Cooling Module (AMCM), essentially a compact two-phase heat exchanger constructed of microchannels and designed to rapidly remove large quantities of heat from critical systems by incorporating phase transition. This paper describes the results of experimental research in two-phase flow phenomena, encompassing both an experimental and an analytical approach to the incorporation of flow patterns for air–water mixtures flowing in microchannels. Specifically addressed are: (1) design and construction of a sensitive two-phase experimental system which measures both ac and dc components of in situ physical mixture parameters including spatial concentration, using concomitant methods; (2) data acquisition and analysis in the amplitude, time, and frequency domains; and (3) analysis of results including evaluation of in situ physical parameters, and assessment of their validity for application in flow pattern determination.     

Experimental analysis of the steady-state behaviour of beam systems with discontinuous support

This paper deals with the experimental analysis of the long-term behaviour of periodically excited linear beams supported by a one-sided spring or an elastic stop. Numerical analysis of the beams showed subharmonic, quasi-periodic and chaotic behaviour. Furthermore, in the beam system with the one-sided spring three different routes leading to chaos were found. Because of the relative simplicity of the beam systems and the variety of calculated nonlinear phenomena, experimental setups are made of the beam systems to verify the numerical results. The experimental results correspond very well with the numerical results as far as the subharmonic behaviour is concerned. Measured chaotic behaviour is proved to be chaotic by calculating Lyapunov exponents of experimental data.

---

Sommario Il presente lavoro concerne l'analisi sperimentale del comportamento a regime di travi lineari, su supporti elastici nonlineari discontinui, eccitate periodicamente. L'analisi numerica dei sistemi in esame ha evidenziato risposte subarmoniche, quasi-periodiche e caotiche, nonchè l'esistenza, nel caso di trave con una molla laterale, di tre differenti percorsi verso il caos. La relativa semplicità dei sistemi di travi ha consentito di procedere ad una verifica sperimentale dei risultati numerici e della varietà dei fenomeni nonlineari da essi evidenziati. La corrispondenza fra risultati sperimentali e numerici è molto buona nel caso di risposta subarmonica. Il comportamento caotico sperimentale è stato convalidato attraverso il calcolo degli esponenti di Lyapunov a partire dai relativi dati.

     

Phase equilibria study of systems composed of refined babassu oil, lauric acid, ethanol, and water at 303.2 K

Deacidification of vegetable oils can be performed using liquid–liquid extraction as an alternative method to the classical chemical and physical refining processes. This paper reports experimental data for systems containing refined babassu oil, lauric acid, ethanol, and water at 303.2 K with different water mass fractions in the alcoholic solvent (0, 0.0557, 0.1045, 0.2029, and 0.2972). The dilution of solvent with water reduced the distribution coefficient values, which indicates a reduction in the loss of neutral oil. The experimental data were used to adjust the NRTL equation parameters. The global deviation between the observed and the estimated compositions was 0.0085, indicating that the model can accurately predict the behavior of the compounds at different levels of solvent hydration.     

Carbon dioxide flow boiling in a single microchannel - Part I: Pressure drops

Carbon dioxide two-phase flow pressure drops have been investigated in a single horizontal stainless-steel micro-tube having a 0.529 mm inner diameter. Experiments were carried out in adiabatic conditions for four saturation temperatures of −10; −5; 0; 5 °C and mass fluxes ranging from 200 to 1400 kg/m² s, for inlet qualities up to unity. Measurements have been compared to the predictions of well-known methods. The Müller-Steinhagen and Heck correlation and the Friedel correlation gave the best fit as well as the homogeneous model when the liquid viscosity is used to represent the apparent two-phase viscosity. Further, an analysis based on the homogeneous model has not shown any clear appearance of the laminar or the transition regimes in any given range of Reynolds number. The apparent viscosity of the two-phase mixture was found larger than the liquid viscosity at low vapour qualities, namely at the lowest temperatures. Hence, a new expression to determine the equivalent viscosity was suggested as a function of the reduced pressure. Lastly, the Chisholm parameter from the Lockhart-Martinelli correlation was found lower than expected and also mainly dependent on the saturation temperature.     

Energy losses of ice slurry in pipe sudden contractions

The paper presents the results of the experimental research on the ice slurry loss coefficient during its flow through sudden contractions. Experimental studies were conducted using a few of the most common contractions of copper pipes. Six contraction ratios were covered: 0.500, 0.615, 0.650, 0.769, 0.800 and 0.813. In the experimental research, the mass fraction of solid particles in the slurry ranged from 20 to 30 (20%, 25%, 30%). Research results allow for determining the theoretical correlation for the ice slurry, in order to calculate the loss coefficient in contractions during laminar flow. The results of experimental investigations also confirmed that the loss coefficients in contractions in turbulent (transitional) flow of the ice slurry are the same as in the case of Newtonian liquids. The paper also presents original theoretical correlation for calculating the kinetic energy correction factor in the laminar range flow of liquid in the Bingham model. This correlation is used in this work for calculation of the ice slurry flow through contractions.