The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Photophysics of ruthenium(II) complexes with 2-(2′-pyridyl) pyrimidine and 2,2′-bipyridine ligands in fluid solution

The photophysics of three complexes of the form Ru(bpy)₃₋(pypm)²⁺ (where bpy2,2′-bipyridine, pypm 2-(2′-pyridyl)pyrimidine and P=1, 2 or 3) was examined in H₂O, propylene carbonate, CH₃CN and 4:1 (v/v) C₂H₅OH---CH₃OH; comparison was made with the well-known photophysical behavior of Ru(bpy)₃²⁺. The lifetimes of the luminescent metal-to-ligand charge transfer (MLCT) excited states were determined as a function of temperature (between −103 and 90 °C, depending on the solvent), from which were extracted the rate constants for radiative and non-radiative decay and ΔE, the energy gap between the MLCT and metal-centered (MC) excited states. The results indicate that ^*Ru(bpy)₂(pypm)²⁺ decays via a higher lying MLCT state, whereas ^*Ru(pypm)₃²⁺ and ^*Ru(pypm)₂(bpy)²⁺ decay predominantly via the MC state.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

发光反应型有机铵分子与CdSe纳米晶的组装

用巯基乙酸做稳定剂制备了水溶性CdSe纳米颗粒, 用十六烷基三甲基溴化铵(HTAB)、发光性(4-甲氧基均二苯乙烯基)二甲基乙基溴化铵 (MODAB)及末端含有双键的(4-甲基丙烯酰氧基均二苯乙烯基)二甲基乙基溴化铵(MSDAB)对该CdSe纳米颗粒进行了混合组装.通过改变三种有机分子的比例可以调控所得组装体的溶解性、聚合性及其发光性质.实验结果表明,当HTAB:MODAB:MSDAB=1:5.98～5.90:0.02～0.10(摩尔比)时,所得组装体具有较好的聚合性、溶解性和荧光性质.     

Ni–Al composite hydroxides fabricated by cation–anion double hydrolysis method for high-performance supercapacitor

Chemical doping of nickel hydroxide with other cations(e.g. Al~(3+)) is an efficient way to enhance its electrochemical capacitive performances. Herein, a simple cation–anion(Ni~(2+)and AlO_2) double hydrolysis method was developed toward the synthesis of nickel–aluminum(Ni–Al) composite hydroxides. The obtained composite hydroxides possesses a porous structure, large surface area(121 m~2/g) and homogeneous element distribution. The electrochemical test shows that the obtained composite hydroxides exhibits a superior supercapacitive performances(specific capacitance of 1670F/g and rate capability of 87% from 0.5 A/g to 20 A/g) to doping-free nickel hydroxide(specific capacitance of 1227 F/g and rate capability of 47% from 0.5 A/g to 20 A/g). Moreover, the galvanostatic charge/discharge test displays that after 2000 cycles at large current density of 10 A/g, the composite hydroxides achieves a high capacitance retention of 98%, indicative of an excellent electrochemical cycleability.     

Ultra-High Performance Liquid Chromatography with Electrospray Ionization Tandem Mass Spectrometry for the Determination of Caffeine in Energy Drinks

A simple and highly sensitive method for the determination of caffeine in energy beverages was developed and validated. Sample preparation utilizing solid-phase extraction (SPE) was simple and reliable. Separation by isocratic ultra-high performance liquid chromatography (UPLC) with a reversed-phase C₁₈ column was performed within 6 min. The use of SPE with UPLC coupled with electrospray ionization-multiple tandem mass spectrometry detection (ESI-MSⁿ) was accurate, reproducible, and validated for the determination of caffeine in energy drink matrices. The limit of quantification for caffeine was approximately 2.1 ng mL^?1. The intra-day and inter-day precisions were less than 4%, and the accuracy of the measurements was between 85.1% and 93.2%. Results for caffeine concentrations in eighteen beverages were compared to the values on the labels. This paper describes the first use of the UPLC–ESI-ion trap MSⁿ technique for quality-control purposes of caffeine present in energy drinks.     

Real-time quantification of Staphylococcusaureus in liquid medium using infrared thermography

We previously showed that infrared thermography (IRT) could be used to quantify viable Escherichiacoli, a representative gram-negative bacterium, in liquid growth media. Here, we evaluated the ability of IRT to enumerate a viable representative gram-positive organism, Staphylococcusaureus. We found that the energy content (EC) of the media was strongly positively correlated (r = 0.999) to measured viable counts of S.aureus ranging from 85 colony-forming units (CFU)/ml to ∼4 × 10⁸ CFU/ml. The EC of S.aureus was ∼2-fold higher than that of E.coli at comparable cell concentrations suggesting that IRT may be used to distinguish genera.     

硅橡胶包覆十八烷/聚(St-MMA)储能微胶囊复合材料制备及热性能

以十八烷/聚(苯乙烯-甲基丙烯酸甲酯)(P(St-MMA))微胶囊为相变材料,硅橡胶作为载体,制备了十八烷/P(St-MMA)/硅橡胶复合材料。研究了微胶囊的加入方式及加入量,硅橡胶包覆方法。通过红外光谱(IR)和扫描电镜(SEM)研究复合材料的结构和形貌。通过力学性能测试如拉伸强度、扯断伸长率,确定最佳的加工方法。通过热重分析法(TG)、差示扫描量热法(DSC)和储热性能对复合材料的热性能进行研究。结果表明,十八烷制成微胶囊加入到硅橡胶中,且微胶囊加入量是2份时,十八烷/P(St-MMA)微胶囊/硅橡胶的热稳定性热稳定性及力学性能较好。室温硅橡胶包覆微胶囊掺混固化法制备的复合材料的力学性能优于直接共混后热固化法和混炼涂抹后热固化法。十八烷/P(MMA-St)/硅橡胶复合材料的焓值为67.6J/g,储能效果好。     

Improving breakdown strength and energy storage efficiency of poly(vinylidene fluoride-co-chlorotrifluoroethylene) and polyurea blend films by double layer structure design

All-organic composites are widely used in energy storage application due to the high breakdown strength performance, but the improvement of energy storage was limited by the relatively low dielectric constant. Therefore, to satisfy the high demands of dielectric materials, energy storage properties of polymer composites should be further enhanced. In this article, poly(vinylidene fluoride-co-chlorotrifluoroethylene) (P(VDF-CTFE)) and polyurea (PUA), which are known as high dielectric ferroelectric material and linearly high energy storage efficiency material respectively, are composited through double layer (DL) casting method for the first time. The properties of DL structured composite film is contrasted with solution blending structure especially in energy storage efficiency, and the results demonstrate that DL structure design can make great use of advantages of two materials and also can avoid the influence of phase separation between P(VDF-CTFE) and PUA efficiently. Moreover, high breakdown strength (6180 kV/cm) and high energy storage efficiency (77%) of DL composites can be realized simultaneously by incorporating PUA as an insulating layer, and the mechanism is discussed in detail. This work provides an effective route to improve the energy storage properties of polymer dielectric materials and shows great application potential.     

Co3+-Rich Na1.95CoP2O7 Phosphates as Efficient Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions in Alkaline Solution

Implementing sustainable energy conversion and storage technologies is highly reliant on crucial oxygen electrocatalysis, such as the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, the pursuit of low cost, energetic efficient and robust bifunctional catalysts for OER and ORR remains a great challenge. Herein, the novel Na-ion-deficient Na_2−xCoP₂O₇ catalysts are proposed to efficiently electrocatalyze OER and ORR in alkaline solution. The engineering of Na-ion deficiency can tune the electronic structure of Co, and thus tailor the intrinsically electrocatalytic performance. Among the sodium cobalt phosphate catalysts, the Na_1.95CoP₂O₇ (NCPO5) catalyst exhibits the lowest ΔE (E_J10,OER−E_J−1,ORR) of only 0.86 V, which favorably outperforms most of the reported non-noble metal catalysts. Moreover, the Na-ion deficiency can stabilize the phase structure and morphology of NCPO5 during the OER and ORR processes. This study highlights the Na-ion deficient Na_2−xCoP₂O₇ as a promising class of low-cost, highly active and robust bifunctional catalysts for OER and ORR.