Nano liquid-metal fluid as ultimate coolant

We proposed for the first time the concept of the nano liquid-metal fluid, aiming to establish an engineering route to make the highest conductive coolant. Using several widely accepted theoretical models for characterizing the nano fluid, the thermal conductivity enhancement of the liquid-metal fluid due to addition of more conductive nano particles was predicted. Further, the effects of particle size, cluster of nano particle, solid-like layer due to adsorption, volume fraction and particle types were evaluated. Having the highest conductivity, being electromagnetically drivable, the liquid metal with low melting point is expected to be an idealistic base fluid for making super conductive solution which may lead to the ultimate coolant in a wide variety of heat transfer enhancement area.     

HIRFL-CSR重离子束内散射效应

电子冷却本质上是电子冷却作用与重离子束内散射作用的动态平衡过程. 在Bjorken和Mtingwa束内散射理论的基础上, 应用对称椭圆积分的方法做束内散射增长率的数值模拟, 并应用于HIRFL-CSR的磁铁聚焦结构. 计算结果表明, 束内散射不会成为CSR磁聚焦结构设计的障碍, 并且CSR可以达到冷却设计指标.     

射流注入角对平板气膜冷却特性影响的实验研究

本文对不同射流注入角的典型单排孔冷却结构的平板气膜冷却特性进行了实验研究,研究对象为轴线与主流来流方向分别成30°、60°、90°的射流孔板,对它们在吹风比为0.5、1.0、1.5条件下的射流孔下游的绝热气膜冷却效率分布特性进行了分析.在吹风比M=0.5时,三个射流注入角条件下近孔区域都能形成较好的冷气覆盖效果;M=1.0时,三者的下游横向平均冷却效率基本相同;M=1.5时,注入角60°的条件下冷却效果最好.     

Anomalous thermochromic transition of poly(di‐n‐octylsilane)

The thermochromic behavior of poly(di‐n‐octylsilane) {[Si(C₈H₁₇)₂]_n; PDOS} was studied by ultraviolet (UV) absorption, differential scanning calorimetry, and X‐ray diffraction measurements. The structure of PDOS in the low‐temperature phase strongly depended on not only the temperature but also the rate of cooling, that is, the thermal history. Temperature‐dependent UV absorption spectra were highly dependent on thermal hysteresis. Cooled rapidly (10 K/min), PDOS showed two absorption peaks at 3.32 and 3.51 eV in low‐temperature‐ordered phases, whereas a single absorption peak at 3.32 eV became predominant with slow cooling (0.3 K/min). The appearance of the two peaks at low temperatures suggested that a mixture of different conformations was introduced by rapid cooling. A fiber diffraction pattern measured at 240 K after rapid cooling also showed evidence of the existence of novel conformation. A temperature‐dependent powder X‐ray diffraction pattern changed significantly between 270 and 280 K. Rapid cooling reduced the intensity of the X‐ray diffraction peak in this temperature region. This intensity change was explained by the conformational mixture in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1085–1092, 2001     

牛顿对热学的贡献

针对学术界对牛顿热学成就的研究较为薄弱的状况，详细论述了牛顿在计温术和传热学上所取得的成果，并分析了其发现冷却定律的背景，指出该定律的发现与他长期从事冶金试验密切相关；探讨了牛顿对热的本质与若干热现象的见解及其历史价值。     

Observation of single Ca ions for trace isotope analysis

We developed an ion trap — laser cooling system for observing the laser induced fluorescence (LIF) of a single ion, in the view of utilizing it for the trace isotope analysis of Ca. We observed stepwise LIF signals, which correspond to the numbers of trapped ⁴⁰Ca⁺ ions (⁴⁰Ca/Ca = 96.9%). The detection efficiency was evaluated and the observation of single ions demonstrated the experimental feasibility of trace isotope analysis. Furthermore, as the next step towards trace isotope analysis, we report observation of the even calcium isotopes, ⁴⁴Ca (⁴⁴Ca/Ca = 2.09%) and ⁴⁸Ca (⁴⁸Ca/Ca = 0.187%), without the use of a selective loading method.     

Improving the specularity of magnetic mirrors for atoms

An array of anti-parallel current-carrying wires creates an inhomogeneous magnetic field capable of reflecting neutral atoms. We present analytical and numerical analyses of the magnetic field produced by such an array, and describe methods for reducing the resulting rms angular deviation from specular reflection to less than 0.1 mrad. Careful choice of cross-sectional wire profiles is shown to dramatically improve specularity of reflection close to the surface. Additionally, we find that the specularity depends on whether the number of wires in the mirror is even or odd, and that there exists an optimal turning height above the surface that maximizes the specularity of reflection from the mirror. Received 16 November 1998     

DSC Calibration During Cooling. A survey of possible compounds

A number of compounds is investigated for DSC calibration during cooling. Adamantane and Zn show fast reversible transitions and can be applied both for temperature and for heat calibrations. A third compound, namely 4,4’-azoxyanisole, has a liquid crystal to isotropic liquid transition at 409K. This compound can be used for temperature calibration. Heat calibration with this compound is more problematic because of the small heat effect and the construction of the baseline. Other compounds like NaNO₃, In, Hg and Pb, show a slight supercooling. Nevertheless they can be used for heat calibration. The use of large samples of NaNO₃ and In gives the possibility to construct the equilibrium onset temperatures of the cooling peaks, so these two compounds are also appropriate for temperature calibration on cooling. This revised version was published online in July 2006 with corrections to the Cover Date.     

强激光对铜反射镜的热破坏效应

本文给出了一个激光对光学材料表面热破坏效应的简化物理模型及数值研究结果。所得到的铜反射镜热破坏阈值与激光脉宽的关系与实验和理论符合很好。提出了反射镜后表面外冷却临界厚度的概念,并得到一个关于多脉冲积累效应的幂定标关系。     

Theory on single molecule-photon cryocooler

The micro mechanism of anti-Stokes fluorescent cooling was investigated on molecular or ionic scale. A new conception of single molecule-photon cryocooler (SMPC) was given, and the smallest cryocooler in the world was predicted. We described SMPC and its running principle in detail. The quantum transition processes of SMPC and the largest cooling coefficient that SMPC can get in an optical transition were given. Also we studied the random property of SMPC in cooling processes. The thermodynamic behavior of single Yb³⁺ ion as a photon cryocooler was imitated.