Blue emission from InGaN/GaN hexagonal pyramid structures

Cathodoluminescence (CL) from InGaN grown on GaN hexagonal pyramid structures has been investigated. The facet structure can be controlled by the growth temperature and reactor pressure. GaN pyramid structures surrounded with facets were grown at 1020 C at a pressure of 500 Torr by low-pressure metalorganic vapor phase epitaxy (LP-MOVPE). The indium mole fraction in the InGaN film depends on the facet structure. The thickness of the InGaN and the peak wavelength and intensity of the CL from the InGaN gradually increased from the bottom to the top of the facets.     

聚苯胺/钡铁氧体复合材料的制备及电磁性能

"采用原位掺杂聚合法,将聚苯胺对粒径在60~80 nm的M型钡铁氧体颗粒(BaFe12O19)进行包覆,得到了具有导电性和磁性的复合材料．通过X射线衍射、傅利叶变换红外光谱仪、扫描电镜和透射电镜等测试手段对材料的形貌和结构进行了表征．结果表明：PANI链段与BaFe12O19颗粒之间存在着作用力．使用振动磁强计和四探针法测定了复合材料的磁性能与电性能,其中50%复合材料的饱和磁化强度为22.2 emu/g,电导率为0.069 S/cm．"     

Crystal growth of cyclodextrin‐based metal‐organic framework with inclusion of ferulic acid

The crystallization of γ‐cyclodextrin‐based metal‐organic framework (CD‐MOF) with inclusion of ferulic acid (FA) was carried out through vapor diffusion of methanol to the aqueous solution of γ‐cyclodextrin (γ‐CD), KOH and FA. Although the crystallization of pure CD was limited in highly basic solution of KOH (pH>13.0), the CD‐MOF with inclusion of FA (FA/CD‐MOF) was able to be formed at pH 6.8 after the neutralization of KOH by FA. The inclusion behavior of FA in CD‐MOF was studied by using differential scanning calorimetry. The data indicate the formation of the stable association between FA and γ‐CD in FA/CD‐MOF.     

3D amorphous carbon and graphene co-modified LiFePO4 composite derived from polyol process as electrode for high power lithium-ion batteries

Amorphous carbon and graphene co-modified LiFePO_4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O_2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO_4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO_4was successfully obtained with electron conductive Fe_2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO_4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO_4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO_4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g~(-1) at 10 C rate.     

α-Al_2O_3比表面积标准物质的研制

选择市售α-Al2O3粉体作为比表面积标准物质候选材料,采用交叉缩分方法对标准物质样品进行分装。检验结果表明α-Al2O3标准物质样品具有良好的均匀性和稳定性(18个月)。采用国际公认的氮气物理吸附BET方法,联合测量能力经过确认的8家实验室对α-Al2O3标准物质样品进行定值,标准值比表面积为5.47 m2/g,不确定度为0.22 m2/g(k=2)。     

分散剂PVA对水热反应制备LiFePO4性能的影响

应用改进的水热反应法制得粒径小且分布均匀的L iFePO4颗粒,煅烧时加葡萄糖形成包覆碳.XRD、SEM和充放电测试表明,该材料粒径约200 nm,颗粒的尺寸分布比较均匀,具有3.45 V的放电平台,放电容量最高达到140 mAh/g,循环到第40周容量仅衰减2.1%.详细讨论了如何有效调控L iFePO4的粒子尺寸以及包覆碳对其电化学性能的影响.     

多层绝热材料规模化干燥处理时温度场的测试与分析

对大批量处理多层绝热材料的大型专用干燥箱满负荷运行时工作区域的温度场进行测试,通过温度分布和温度场均匀性的分析,得出了最高温度发生点的位置与成因以及影响温度场均匀性的主要因素,并对温度的控制方法、多层材料的布置方案和干燥设备的改进提出了建议。     

Structural Engineering and Optimization of Zwitterionic Salts for Expeditious Discovery of Thermoresponsive Materials

This work reported the discovery of N-triflimide (NTf)-based zwitter-ionic liquids (ZILs) that exhibit UCST-type phase transitions in water, and their further structural optimization in fine-tuning polarity to ultimately afford newfangled thermosensitive materials carrying attractive and biocompatible T_c values that clearly demonstrated the true value of the tunability of ZIL structure. This research established that with non-aromatic, acyclic ZILs as small-molecule thermoresponsive materials, their mixing and de-mixing with water triggered by temperatures are entirely reversible.     

转移矩阵法在负折射率介质材料平板波导中的应用研究

利用严格电磁理论,推导出了适用于负折射率介质材料光波导的转移矩阵,分析讨论了转移矩阵的性质和应用.利用转移矩阵方法,推导出导波层为负折射率介质材料、覆盖层和衬底为右手材料的三层对称介质光波导的本征色散方程.用图解法研究了负折射率介质波导中TE波的异常色散特性.在负折射材料介质波导中没有零阶模,最低阶为1阶模,并且有截止频率,只有波导参量满足一定条件的时候才会存在,导模的横向波数可以为实数和纯虚数,而正折射率介质波导导模的横向波数只能为实数.     

半球蓝宝石整流罩制造技术研究

整流罩在高速飞行中既要对空气进行整流,同时又起光学窗口的作用。蓝宝石材料硬度高,加工非常困难。分别从精磨模、精磨磨料、抛光膜层、抛光辅料、机床速度和压力等方面介绍了一种加工蓝宝石整流罩的工艺方法。