A preliminary study on the initial elastic adhesion behavior of leucocytes

By treating the cell body as an elastic colloid and applied with the Hertz contact theory of linear elasticity and the lubrication equation of fluid dynamics, the elastic adhesion behavior of leucocytes in close motion toward a plane surface is investigated. The effect of the Stokes number on the deformation profile of the cell is considered during the adhesion period. From the results of numerical simulation, it is found that under certain conditions (i.e. regardless of the magnitude of F for the cases of ST=1 and 3 and ε0.0055 for ST=10), after exhausting all of the incoming kinetic energy, the cell can rest at an equilibrium separation which is close to the ligand–receptor bond length formed between two interacting surfaces.     

Concentration and characterization of dilute colloidal samples by potential-barrier field-flow fractionation

Summary Potential-barrier field-flow fractionation, which is a combination of potential-barrier chromatography and sedimentation field-flow fractionation, is shown to be a convenient and accurate method for the concentration and analysis (separation and characterization) ofdilute colloidal samples. Two sizes (0.158 and 0.271 μm) of haematite (α-Fe₂O₃) monodisperse colloidal samples diluted in volumes of up to 20 cm³ are used as model colloids. The particle diameters found by the present concentration procedure under various experimental conditions are in good agreement with those determined by conventional sedimentation field-flow fractionation, in which a small concentrated sample volume was injected directly into the column.     

Mechanical behaviour of biodegradable agricultural films under real field conditions

The mechanical behaviour of various types of biodegradable materials depends on their chemical composition and additives, the processing characteristics and the application conditions. The environmental conditions during storage and usage of these materials strongly influence their mechanical properties and behaviour. Ageing and degradation during the useful lifetime of biodegradable agricultural films causes losses in the mechanical performance of the material, as measured by monitoring the evolution of some of the critical mechanical properties. Such losses may be comparable to the corresponding losses of the conventional polyethylene agricultural films due to ageing, or they may be more drastic. In the present paper, the overall mechanical and ageing/degradation behaviour of experimental specially designed and manufactured low-tunnel and mulching biodegradable films, exposed to full-scale field conditions is analysed. Selected critical mechanical properties of these films manufactured with different grades of Mater-Bi material and additives, different thickness and processing schemes and exposed to real cultivation conditions in four different locations in Europe are investigated in the laboratory and compared against the corresponding behaviour of conventional agricultural films at various stages of their exposure time.     

An unequivocal synthesis of some substituted 1,2,4-triazolo[1,5-a]pyrimidines

An unequivocal synthesis of 5-chloro-7-methyl- (8) and 7-methyl-1,2,4-triazolo[1,5-a]pyrimidine (10) from 2-amino-4-chloro-6-methylpyrimidine (5) through the corresponding amidine6 and formamide oxime7 was developed. It was unambigously shown by comparison of the chemical shifts and the magnitude of coupling constants that the compounds obtained by condensation of 3-amino-1,2,4-triazole (12) and ethyl acetoacetate (13) and some further transformations are isomeric 5-methyl substituted 1,2,4-triazolo[1,5-a]pyrimidines1,9, and11.

---

Eine eindeutige Synthese einiger substituierter 1,2,4-Triazolo[1,5-a]pyrimidine

Zusammenfassung Es wurde ein eindeutiger Syntheseweg für 5-Chlor-7-methyl- (8) und 7-Methyl-1,2,4-triazolo[1,5-a]pyrimidin (10) ausgehend von 2-Amino-4-chlor-6-methylpyrimidin (5) über das entsprechende Amidin6 und das Formamidoxim7 entwickelt. Durch Vergleich von chemischen Verschiebungen und Kopplungskonstanten konnte eindeutig gezeigt werden, daß die Verbindungen, die bei der Kondensation von 3-Amino-1,2,4-triazol (12) and Ethylacetoacetat (13), sowie einige weitere Transformationsprodukte, isomere 5-Methylsubstituierte 1,2,4-Triazolo[1,5-a]pyrimidine sind (1,9,11).

     

The detection of oxygen in magneto-optical layers with SIMS

The detection of oxygen in magneto-optical layers is of fundamental importance for the characterization of the stability of RE-TM material. The magnetic properties are directly influenced by oxide formation. Oxygen depth profiles are carried out by using the SIMS technique. A comparison with magnetic measurements showed a clear conformity. We were able to study the oxidation behaviour of various layers at room temperature and at higher values up to 250° C for several hours. It could be shown that aluminum is a successful material for the protection of RE-films against oxidation. The difficulties of translating SIMS counting rates into concentration values were overcome by using EPMA. Specially prepared reference samples were measured by this technique and could then be used as standard samples for SIMS.     

Intercalation materials for lithium rechargeable batteries

An overview is given of intercalation materials for both the negative and the positive electrodes of lithium batteries, including the results of our own research. As well as lithium metal as a negative electrode, we consider insertion materials based on aluminium alloys. In the case of the positive electrode metal-oxides based on manganese, nickel and cobalt are discussed. Received: 27 May 1997 / Accepted: 30 July 1997     

HPLC monitored synthesis of R2NCH2 substituted benzene derivatives used as (C,N)-ligands for organometallic compounds

2-(Diethylaminomethyl)phenyl bromide and 1,3-bis(dimethylaminomethyl)-benzene, useful ligands for the synthesis of hypervalent organometallic compounds, were prepared and characterized by NMR (¹H, ¹³C, 2D experiments) spectroscopy. Their synthesis was monitored by the HPLC method. The compounds were eluted on a Nucleosil 120 Si column (5 μm, 25×0.4 cm) with n-hexane at room temperature using a 1.0 ml/min flow-rate. The maximum values of absorbance for the studied compounds, excepting the diethylamine, were located in a narrow range around 212 nm, the wavelength used for their UV detection. The diethylamine was detected at 190 nm. The calibration curves are straight lines with correlation factors r>0.995. The HPLC data are in good agreement with those provided by NMR spectroscopy.     

Secure Direct Communication Using Ensembles with the Same Compressed Density Matrix

In this paper, a quantum secure direct communication protocol using ensembles with the same density matrix is proposed. The two communication parties can realize the message transmission using this method through a quantum channel, each bit of information can be transmitted using an ensemble and read out through global measurement.The eavesdropping behavior can be detected through the channel diagnoses.     

3-Aminopropylsilatrane and Its Derivatives: A Variety of Applications

Silatranes arouse much research interest owing to their unique structure, unusual physical–chemical properties, and diverse biological activity. The application of some silatranes and their analogues has been discussed in several works. Meanwhile, a comprehensive review of the wide practical usage of silatranes is still absent in the literature. The ability of silatranes to mildly control hydrolysis allows them to form extremely stable and smooth siloxane monolayers almost on any surface. The high physiological activity of silatranes makes them prospective drug candidates. In the present review, based on the results of numerous previous studies, using the commercially available 3-aminopropylsilatrane and its hybrid derivatives, we have demonstrated the high potential of 1-organylsilatranes in various fields, including chemistry, biology, pharmaceuticals, medicine, agriculture, and industry. For example, these compounds can be employed as plant growth biostimulants, drugs, optical, catalytic, sorption, and special polymeric materials, as well as modern high-tech devices.     

Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials

As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.