A preliminary study on the initial elastic adhesion behavior of leucocytes

By treating the cell body as an elastic colloid and applied with the Hertz contact theory of linear elasticity and the lubrication equation of fluid dynamics, the elastic adhesion behavior of leucocytes in close motion toward a plane surface is investigated. The effect of the Stokes number on the deformation profile of the cell is considered during the adhesion period. From the results of numerical simulation, it is found that under certain conditions (i.e. regardless of the magnitude of F for the cases of ST=1 and 3 and ε0.0055 for ST=10), after exhausting all of the incoming kinetic energy, the cell can rest at an equilibrium separation which is close to the ligand–receptor bond length formed between two interacting surfaces.     

电化学合成铜配合物的研究

采用金属铜为"牺牲"阳极,首次在无隔膜电解槽中,电化学溶解金属铜一步制备了纳米CuO前体Cu(OEt)2, Cu(OBu)2, Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac) (acac为乙酰丙酮基).产物通过红外光谱(FT-IR)、拉曼光谱(Raman spectrum)进行表征.同时讨论了影响电合成铜醇盐及其配合物的关键因素.实验表明,防止阳极钝化,温度控制在30～50 ℃,采用有机胺溴化物为导电盐, 电极电位控制在0.8～1.2 V之间,可以提高电合成效率.实验同时表明Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac)可作为制备含铜纳米材料前驱体.     

Carbon anode materials from polysiloxanes for lithium ion batteries

Three kinds of silicon-containing disordered carbons have been prepared by pyrolysis of polysiloxanes with different amounts of phenyl side groups. X-ray powder diffraction, X-ray photoelectron spectroscopy and electrochemical capacity measurements were performed to study their behaviors. Graphite crystallites, micropores, and silicon species affect their electrochemical performances. All of them present high reversible capacities, >372 mAh/g. Since the graphite crystallites are very small, they contribute very little to reversible capacity. The number of micropores produced by gas emission during the heat-treatment process decides whether they exhibit reversible capacity. Si mainly exists in the form C–Si–O and influences the irreversible capacity. There is no evident capacity fading in the first ten cycles, indicating promising properties for these disordered carbons.     

Structure and magnetic properties of Ca14MnP11

The compound Ca₁₄MnP₁₁ crystallizes in the Ca₁₄AlSb₁₁ structure type with the tetragonal space group I4₁/acd (Z=8) and lattice parameters of , c=20.7565(9) at 90 K. The structure consists of MnP₄⁹⁻ tetrahedron, P₃⁷⁻ trimer, 4 P³⁻ isolated anions and 14 Ca²⁺ cations. Similar to other compounds of this structure type containing phosphorous, the P₃⁷⁻ trimer has a central P atom that is best modeled in the structure as being equally split between two sites. In addition, there is no additional distortion of the manganese-containing tetrahedron compared with the main group analog, Ca₁₄GaP₁₁, suggesting that the Mn oxidation state is Mn²⁺. Temperature-dependent magnetic susceptibility shows that the compound is paramagnetic over the entire temperature range measured (2-300 K). The data can be fit with a modified Curie-Weiss law and provide an effective magnetic moment of 5.80 (2) B.M. with a Weiss constant of −2.13(2) K and . This moment is significantly higher than those measured for any of the Mn-containing analogs and is consistent with Mn²⁺. This result will be discussed in light of the electron counting scheme for Mn compounds of the Ca₁₄AlSb₁₁ structure-type.     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Kinetics parameters in Mg2SiO4:Tb thermoluminescent material

This paper reports a first approach on the kinetics parameters of terbium-activated magnesium orthosilicate using various methods. A deconvolution has also used for taking into account a more complex glow-curve structure.

---

Zusammenfassung Mittels verschiedener Methoden werden in erster Näherung die kinetischen Parameter von terbiumaktiviertem Magnesiumorthosilikat ermittelt Zur Berücksichtigung einer komplexeren Thermolumineszenzkurve wurde auch eine Dekonvolution angewendet.

     

次级源和误差传感器布放对带弹性障板的充液直管声振复合有源控制的影响*

针对充液管路系统噪声有源控制问题,研究了次级源和误差传感器布放对带弹性障板的充液直管管路系统有源消声与有源消振复合控制效果的影响。基于声固耦合方法建立了带弹性障板的充液直管管路系统的有限元模型,在声激励下对比了次级声源布放对系统有源消声性能的影响,并在组合激励下分析了次级力源、次级声源和误差传感器布放对系统复合有源控制的影响。结果表明,非对称分布的次级声源容易激起管壁振动,进而带动障板振动,导致有源消声效果不佳;采用对称分布的次级声源可使低频段的降噪量提高10 dB以上。复合有源控制可进一步提升全频段的控制效果。通过增加振动误差传感器数量,可使绝大多数频点的降噪量提高1~20 dB不等。此外,在管壁上布放的两圈次级力源的间距小于管壁振动波长的1/4,且都不位于管壁振动节点附近时控制效果更好。     

左手材料设计及透明现象研究进展

左手材料具有负的介电常数, 磁导率和折射率,它与电磁波相互作用的规律与传统材料有本质的区别.首先讨论了金属线点阵结构实现负介电常数和开口谐振环点阵结构实现负磁导率的内在机理,综述了目前实现左手材料的设计与制备方法,讨论了左手材料研究中能量如何定义以满足守恒律, 左手材料的宏观等效参数的确定,以及影响左手材料负折射相对频带带宽的因素。最后对左手材料在光子隧道效应和电磁波透明方面的应用进行了介绍,重点讨论了利用力学中的``中性夹杂'概念对电磁波透明的设计.论文还探讨了声波左手材料的概念和物理意义,介绍了用声波左手材料实现声波透明的方法.      

A Novel Gelatin-Based Sustained-Release Molluscicide for Control of the Invasive Agricultural Pest and Disease Vector Pomacea canaliculata

Pomacea canaliculata, one of the 100 most destructive invasive species in the world, and it is an important intermediate host of Angiostrongylus cantonensis. The molluscicides in current use are an effective method for controlling snails. However, most molluscicides have no slow-release effect and are toxic to nontarget organisms. Thus, these molluscicides cannot be used on a large scale to effectively act on snails. In this study, gelatin, a safe and nontoxic substance, was combined with sustained-release molluscicide and was found to reduce the toxicity of niclosamide to nontarget organisms. We assessed the effects of gelatin and molluscicide in controlling P. canaliculata snails and eggs. The results demonstrated that the niclosamide retention time with 1.0% and 1.5% gelatin sustained-release agents reached 20 days. Additionally, the mortality rate of P. canaliculata and their eggs increased as the concentration of the niclosamide sustained-release agents increased. The adult mortality rate of P. canaliculata reached 50% after the snails were exposed to gelatin with 0.1 mg/L niclosamide for 48 h. The hatching rate of P. canaliculata was only 28.5% of the normal group after the treatment was applied. The sustained-release molluscicide at this concentration was less toxic to zebrafish, which means that this molluscicide can increase the safety of niclosamide to control P. canaliculata in aquatic environments. In this study, we explored the safety of using niclosamide sustained-release agents with gelatin against P. canaliculata. The results suggest that gelatin is an ideal sustained-release agent that can provide a foundation for subsequent improvements in control of P. canaliculata.     

ZnO超细纳米线阵列的制备及其电化学性能

以Zn(NO₃)₂· 6H₂O和C₆H₁₂N₄为原材料,采用二步水热法在碳纤维布上合成了形貌尺寸均匀的ZnO超细纳米线阵列。用 X 射线衍射(XRD)和扫描电镜(SEM)对其晶体结构和形貌进行了表征,利用恒流充放电测试等手段对其进行电化学性能测试。测试结果表明,材料表现出优异的电化学性能。在200 mA/g的电流密度下循环150次后,ZnO超细纳米线阵列仍然约有730 mAh/g的充放电比容量,库伦效率保持在95%以上。在1 200 mA/g的大倍率条件下,材料的充放电比容量依旧可达481 mAh/g左右,表现出十分良好的循环稳定性和可逆性能,是一种较为理想的锂离子电池负极复合材料。