Evaluation of ion mobility in capillary electrophoresis coupled to mass spectrometry for the identification in metabolomics

Currently, feature annotation remains one of the main challenges in untargeted metabolomics. In this context, the information provided by high-resolution mass spectrometry (HRMS) in addition to accurate mass can improve the quality of metabolite annotation, and MS/MS fragmentation patterns are widely used. Accurate mass and a separation index, such as retention time or effective mobility (μ_eff), in chromatographic and electrophoretic approaches, respectively, must be used for unequivocal metabolite identification. The possibility of measuring collision cross-section (CCS) values by using ion mobility (IM) is becoming increasingly popular in metabolomic studies thanks to the new generation of IM mass spectrometers. Based on their similar separation mechanisms involving electric field and the size of the compounds, the complementarity of ^DTCCS_N2 and μ_eff needs to be evaluated. In this study, a comparison of ^DTCCS_N2 and μ_eff was achieved in the context of feature identification ability in untargeted metabolomics by capillary zone electrophoresis (CZE) coupled with HRMS. This study confirms the high correlation of ^DTCCS_N2 with the mass of the studied metabolites as well as the orthogonality between accurate mass and μ_eff, making this combination particularly interesting for the identification of several endogenous metabolites. The use of IM-MS remains of great interest for facilitating the annotation of neutral metabolites present in the electroosmotic flow (EOF) that are poorly or not separated by CZE.     

高双折射微结构光纤特性的研究

采用基于单轴各向异性完美匹配层吸收边界的频域有限差分方法研究一种椭圆芯高双折射微结构光纤的特性.通过计算,分析了空气孔尺寸和孔距对模式双折射、泄漏损耗以及模式截止波长的影响;综合研究了双折射微结构光纤的几种特性及其相互之间的影响和制约关系;并首次采用有效面积的方法研究高双折射微结构光纤的模式截止特性,分析单模传输条件;从而为高双折射微结构光纤的设计提供了一定的理论依据.     

HL-2M常规偏滤器位形抽气对碳杂质分布影响的模拟分析

在小角度V型结构的HL-2M常规偏滤器位形下,采用SOLPS 5.0程序研究了抽气速率Sp对装置粒子排除控制能力及溅射产生的碳杂质分布的影响.模拟结果表明,当进入边缘区域的能量为4MW、上游密度为n sep=3.0×10 m-3时,过高的抽气速率(大于40m3?s-1)将迅速降低靶板附近中性粒子压强和等离子体密度,并引...     

Readjustment of the Bohr stopping force from energies of keV/n to a few tens of MeV/n ions in elemental targets

An analytical approach for the electronic stopping force for non-relativistic energies that has no adjustable parameters has been developed. The approach combines the Bohr model for the close collisions and the Firsov model for the distant collisions. In order to combine the two models, a probabilistic model was introduced. We have applied our model to ¹⁶O in ¹²C, ¹⁶O in ²⁷Al, ⁸⁴ Kr in ²⁷Al, ⁵Li in ¹²C, ¹²C in ¹²C, and ¹³²Xe in ¹²C systems and compared with SRIM/MSTAR software, the original Bohr model, the Firsov model and available experimental data. We have found that the calculated electronic stopping force values are in agreement with the general qualitative behaviour of the electronic stopping force as a function of particle velocity reported in the literature. The proposed analytical formula is expected to be valid for other projectile-target combinations but more experimental data are needed to verify this assumption.     

光子晶体光纤非线性系数与其结构参量及光波长的关系

推导计算了全内反射型光子晶体光纤的非线性系数与其两个几何结构参量:包层空气孔半径和空气孔间距之间的关系,给出了输入光波长为1550 nm处,非线性系数与这两个结构参量之间的关系曲线并对其进行了分析.给出了全内反射型光子晶体光纤的非线性系数随输入光波长变化的曲线,分析了短波处高非线性系数产生的原因并指出这一特性的应用潜力.     

连续级联喇曼光纤激光器耦合波方程的修正

从最基本的耦合波方程出发,考虑光波正反向传输的情况下,推导出了一个全面的、准确的关于连续级联喇曼光纤激光器的理论模型,描述了各级Stokes光波功率沿光纤长度的变化.指出了相关一些文献中存在的不足,并且给出了多级斯托克斯光波相互作用的有效作用面积的表达式.此模型有助于喇曼光纤激光器的设计.     

压电式微滴按需喷射的过程控制和规律

微滴喷射增材制造技术中沉积微滴的大小与均匀性是影响成型件质量的关键因素.本文设计了一种用于生成均匀微滴的压电驱动式微滴喷射装置,通过压电材料带动柔性膜片振动,将液体从喷嘴中喷出生成微滴,采用数值模拟和实验相结合的方法,研究了不同控制参数下膜片振幅及其对生成微滴尺寸和均匀性的影响.研究结果表明:膜片振幅大小受到驱动电压和压电频率的共同影响,压电频率是导致膜片中心点振幅实验测量值小于理论计算值的主要原因,膜片振动会导致喷嘴内部压力发生变化从而影响微滴生成尺寸.在相同驱动电压条件下,压电频率为10 Hz时存在压电膜片振幅最大值.随着膜片振幅的增大,喷孔处液体速度和液柱长度增大到临界值时可以生成微滴,当喷孔处的液柱长度超过临界值时,会形成卫星液滴. 当膜片振幅区间在30 $\mu$m$\sim $42 $\mu $m可以稳定生成微滴,生成最小微滴尺寸为339.8$\mu$m,直径最大变化率为0.29%,相邻两微滴间距最大变化率为2.67%,生成微滴的尺寸及均匀性较好.研究结果有助于提高压电式微滴喷射装置的液滴生成质量.      

The glucocorticoid derivative with the phthalimide group cationic nanocrystal for ophthalmic application: a design space development approach

The glucocorticoid derivative of budesonide with a phthalimide group is a drug candidate to treat inflammatory eye diseases; nevertheless, it presents low water solubility. Drug nanocrystals have been proposed to overcome this hurdle. The development of an innovative ophthalmic anti-inflammatory nanosuspension was performed using a design space approach. We obtained the particle size reduction of this glucocorticoid derivative on a nanometer scale (approximately 165.0 nm), applying wet bead milling on a super reduced scale. The design of experiment supported the optimization of the formula evaluating the parameters that influence reducing the particle size and also allowed determining the design space. Considering the two statistical models developed and the size range obtained, we proposed that the optimized formulation for the glucocorticoid derivative nanosuspension may be 1.0 wt% glucocorticoid derivative and 0.092 wt% cetylpyridinium chloride. This formulation was characterized by the morphological, physical–chemical, and mucoadhesive in vitro test and showed potential for ophthalmic use with reduced frequency of product application, improved efficiency, and safety, which may promote better patient compliance.     

基于贝叶斯参数优化的无模型自适应硅单晶直径控制

直拉硅单晶的生长过程涉及多场多相耦合与复杂的物理化学变化,其中工艺参数的波动是导致晶体直径不均匀的重要原因,如何实现工艺参数的控制以获得理想的、均匀的晶体直径具有重要的研究意义。本文分析现有控制方法存在不稳定以及控制效果不佳的问题后,提出基于贝叶斯参数优化的无模型自适应控制模型来控制硅单晶生长过程中的晶体直径。首先以坩埚上升速度与加热器的功率作为控制输入参数,晶体直径作为输出,搭建无模型自适应控制模型,并分析算法的稳定性。其次将控制模型进行仿真实验,发现硅单晶直径控制模型中不同的超参数设定会影响控制过程的迭代次数以及控制效果。最后,利用贝叶斯优化超参数的取值范围,并进行最终的仿真实验,结果表明,经贝叶斯参数优化后的控制模型计算快、迭代次数少,输出的晶体直径稳定,同时将生长工艺参数控制在实际生产要求范围内。因此,基于贝叶斯参数优化的无模型自适应控制实现了硅单晶直径均匀稳定的有效控制,具有结合工程背景的实际应用前景。     

双流体雾化液滴荷电特性分析

本文通过理论分析,提出了双流体荷电雾化过程中,增大电场强度或减小液滴粒径均能提高荷电效果的论点。针对不同的电极布置情况建立了数值模拟模型,计算结果表明,双流体喷嘴接地时,喷嘴与环状电极之间的电场强度比喷嘴不接地时大很多。通过实验,验证了电场强度、液滴粒径等参数对荷电效果的影响规律,在环状电极荷电情况下,双流体喷嘴接地时,液体荷质比高于双流体喷嘴不接地时的荷质比;电场强度增大,荷质比增加;液滴粒径越小,荷质比越大;在一定的电导率范围内,电导率越大,荷质比越小。实际喷雾中,运动液滴发生二次破碎的临界荷电量小于Rayleigh极限。