Geometrical disorder of the fronts of a tunnel-crack propagating in shear in some heterogeneous medium

A statistical analysis of the deformation of the fronts of a tensile tunnel-crack propagating in fatigue in some medium with spatially varying Paris constant was recently performed, with special emphasis on the evolution of the power spectra and correlation functions of the fluctuations of the fronts around reference straight lines. This study is extended here to coplanar propagation (along a weak plane) of a tunnel-crack loaded in mode 2+3. The results are rather similar to those previously obtained for mode 1. In particular, just like for tensile loadings, there is an effect of gradual selection in time of Fourier components of the fluctuations of the fronts of large wavelength. One novelty, however, is that for shear loadings, the fronts no longer tend to become symmetrical in time, so that correlations between crack front fluctuations at two points are higher for points located on the same front than for points located on distinct ones.     

Characterizations of competition multigraphs

The notion of a competition multigraph was introduced by C. A. Anderson, K. F. Jones, J. R. Lundgren, and T. A. McKee [C. A. Anderson, K. F. Jones, J. R. Lundgren, and T. A. McKee: Competition multigraphs and the multicompetition number, Ars Combinatoria 29B (1990) 185-192] as a generalization of the competition graphs of digraphs.In this note, we give a characterization of competition multigraphs of arbitrary digraphs and a characterization of competition multigraphs of loopless digraphs. Moreover, we characterize multigraphs whose multicompetition numbers are at most m, where m is a given nonnegative integer and give characterizations of competition multihypergraphs.     

Cracking in D6ac steel

This paper examines the results of an extensive test program undertaken to study crack growth in D6ac steel and shows that in each case the increment in the crack length per cycle (da/dN) conforms to the Generalised Frost-Dugdale crack growth law. This is found to be true for both constant K_max, constant R ratio load increasing, and compression-compression pre-cracking tests in the L-T, T-L and the S-T directions.     

Inter-layer edge tunneling and transport properties in separately contacted double-layer quantum-Hall systems

A theory of transport in the quantum-Hall regime is developed for separately contacted double-layer electron systems. Inter-layer tunneling provides a channel for equilibration of the distribution functions in the two layers at the edge states. Resistances and transresistances for various configurations of the electrodes are calculated as functions of the inter-layer tunneling amplitude. Induced current in one of the layer by a current in the other is also calculated. It is shown that reflection at the leads causes change in the results for some electrode configurations. The results obtained in this work is consistent with recent experiments.     

On star and caterpillar arboricity

We give new bounds on the star arboricity and the caterpillar arboricity of planar graphs with given girth. One of them answers an open problem of Gyárfás and West: there exist planar graphs with track number 4. We also provide new NP-complete problems.     

Structure of propagating edge diffusion flames in hydrocarbon fuel jets

Direct numerical simulations with a C₃-chemistry model have been performed to investigate the transient behavior and internal structure of flames propagating in an axisymmetric fuel jet of methane, ethane, ethylene, acetylene, or propane in normal earth gravity (1g) and zero gravity (0g). The fuel issued from a 3-mm-i.d. tube into quasi-quiescent air for a fixed mixing time of 0.3 s before it was ignited along the centerline where the fuel–air mixture was at stoichiometry. The edge of the flame formed a vigorously burning peak reactivity spot, i.e., reaction kernel, and propagated through a flammable mixture layer, leaving behind a trailing diffusion flame. The reaction kernel broadened laterally across the flammable mixture layer and possessed characteristics of premixed flames in the direction of propagation and unique flame structure in the transverse direction. The reaction kernel grew wings on both fuel and air sides to form a triple-flame-like structure, particularly for ethylene and acetylene, whereas for alkanes, the fuel-rich wing tended to merge with the main diffusion flame zone, particularly methane. The topology of edge diffusion flames depend on the properties of fuels, particularly the rich flammability limit, and the mechanistic oxidation pathways. The transit velocity of edge diffusion flames, determined from a time series of calculated temperature field, equaled to the measured laminar flame speed of the stoichiometric fuel–air mixtures, available in the literature, independent of the gravity level.     

Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites

Fracture behaviour of polyethylene (PE)/Mg-Al layered double hydroxide (LDH) based nanocomposites has been studied by essential work of fracture (EWF) approach. Transmission electron microscopy (TEM and X-ray diffraction (XRD) analysis have been used to investigate the morphological features of these nanocomposites. A maximum in the non-essential work of fracture was observed at 5 wt.% LDH demonstrating enhanced resistance to crack propagation compared to pure PE. Morphological analyses of the nanocomposites show that the dispersed LDH platelets are partially exfoliated and also forms clusters with polymer chains remaining entrapped within. Rheological analyses show that the typical low-frequency Newtonian flow behaviour, as observed in unfilled polymer, shifts to shear-thinning behaviour with increasing LDH concentration. At 5 wt.% LDH a ductile-to-brittle transition has been observed. Fracture surface investigation by SEM reveals the arresting of the plastic crack growth by the LDH particle clusters, which is more significant at 5 wt.% LDH content. At higher LDH concentrations, the number of such particle clusters increases causing decrease in the average distance between them. As a result large-scale plastic deformation of the matrix at higher LDH concentration is effectively arrested favouring small strain failure and this in turn reaffirms the possible existence of a ductile-to-brittle transition. The study in general reveals that the resistance against crack initiation (essential work of fracture: EWF) and crack propagation (non-essential work of fracture: βw_p) in these nanocomposites are structurally correlated with the matrix behaviour and the morphology (state of LDH particle dispersion) respectively.     

Edge colorings of graphs embeddable in a surface of low genus

In this paper, by using the Discharging Method, we show that any graph with maximum degree Δ 8 that is embeddable in a surface Σ of characteristic χ(Σ) 0 is class one and any graph with maximum degree Δ 9 that is embeddable in a surface Σ of characteristic χ(Σ) = − 1 is class one. For surfaces of characteristic 0 or −1, these results improve earlier results of Mel'nikov.     

Irregularity strength of trees

The main result of this paper establishes that the irregularity strength of any tree with no vertices of degree two is its number of pendant vertices.     

超声辅助电镀的仿真与实验*

为了提高镀层的表面质量,提出了一种超声辅助电镀的方法。超声的空化与搅拌作用可以影响电镀的电沉积过程。设计了合理的换能器结构,并搭建了超声辅助电镀装置。通过对模型进行压电声学场与电镀场耦合仿真分析,结果表明：在硫酸铜电解液,镀铜时间60s,电压300V条件下,进行超声辅助电镀,镀层厚度分布均匀,镀层中部电流密度分布均匀,边缘最大电流密度是未加超声的2倍左右 。基于仿真结果,进行相同的实验测试,结果表明：超声辅助电镀可以提高镀层的均匀性,减少铜颗粒表面的杂质,提高表面的光洁度。阴极样品距离换能器头部位置在60mm左右,镀层质量良好。