绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

Point load determination of static elastic moduli using laser speckle interferometry

Electronic speckle interferometry (ESPI) is used to determine the Young's modulus E and Poisson ratio ν of an isotropic material. Micron scale deformations of the surface of the block of polymethyl-methacrylate (PMMA) are induced by normal application of a known near-point force. These deformations are recorded in speckle interferometric fringe patterns. An iterative minimum error inversion technique is developed to obtain the elastic properties from the positions of fringe peaks and troughs observed in the fringe patterns. Sensitivity tests of the method on calculated fringe patterns using measured experimental uncertainties suggest the technique will provide measures of the elastic moduli to better than 5%. In an experimental test on a bloc of PMMA (acrylic) the technique gave values of E and ν that differed from corresponding measures obtained using more conventional strain-gauge methods by less than 4%.     

A Nonlinear Drift - Diffusion System with Electric Convection Arising in Electrophoretic and Semiconductor Modeling

A multi-dimensional transient drift-diffusion model for (at most) three charged particles, consisting of the continuity equations for the concentrations of the species and the Poisson equation for the electric potential, is considered. The diffusion terms depend on the concentrations. Such a system arises in electrophoretic modeling of three species (neutrally, positively and negatively charged) and in semiconductor theory for two species (positively charged holes and negatively charged electrons). Diffusion terms of degenerate type are also possible in semiconductor modeling. For the initial boundary value problem with mixed Dirichlet - Neumann boundary conditions and general reaction rates, a global existence result is proved. Uniqueness of solutions follows in the Dirichlet boundary case if the diffusion terms are uniformly parabolic or if the initial and boundary densities are strictly positive. Finally, we prove that solutions exist which are positive uniformly in time and globally bounded if the reaction rates satisfy appropriate growth conditions.     

Characterization of electrodeposited nickel film surfaces using atomic force microscopy

Microstructures of nickel surfaces electrodeposited on indium tin oxides coated glasses are investigated using atomic force microscopy. The fractal dimension D and Hurst exponent H of the nickel surface images are determined from a frequency analysis method proposed by Aguilar et al. [J. Microsc. 172 (1993) 233] and from Hurst rescaled range analysis. The two methods are found to give the same value of the fractal dimension D∼2.0. The roughness exponent α and growth exponent β that characterize scaling behaviors of the surface growth in electrodeposition are calculated using the height-difference correlation function and interface width in Fourier space. The exponents of α∼1.0 and β∼0.8 show that the surface growth does not belong to the universality classes theoretically predicted by statistical growth models.     

Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.     

光纤机敏结构制作方法的研究

本文讨论机敏结构的制作方法、集成光纤传感器存在的问题、现有解决方法和今后的研究方向。     

含铒碲酸盐玻璃的上转换荧光性质研究

在室温下,用804nm波长的半导体激光器作激发源,在TeO_2-PbO基掺铒碲酸盐玻璃中实现了中心波长分别为525nm,550nm和660nm的上转换发射.荧光强度与激发功率呈非线性关系.估测了PbO含量对上转换荧光相对强度的影响.     

Mittlere Schwingungsamplituden von OTeF 5 −

Summary Mean amplitudes of vibration for OTeF ₅ ^– have been calculated from known spectroscopic and structural data in a wide temperature range. The results are briefly discussed in comparison with those of related species.

     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Anisotropic elastodynamics in a half space: An analytic method for polynomial data

An initial boundary value problem for the dynamic system of anisotropic elasticity in a half space is studied in the paper. A novel method of finding an exact solution of this problem for a special polynomial form of initial data and inhomogeneous term of the system is described. On the base of this method the simulation of elastic waves in different homogeneous anisotropic half spaces is implemented.