Operational characteristics and power scaling of a transverse flow transversely excited CW CO<Subscript>2</Subscript> laser

Transverse flow transversely excited (TFTE) CO₂ lasers are easily scalable to multikilowatt level. The laser power can be scaled up by increasing the volumetric gas flow and discharge volume. It was observed in a TFTE CW CO₂ laser having single row of pins as an anode and tubular cathode that the laser power was not increasing when the discharge volume and the gas volumetric flow were increased by increasing the electrode separation keeping the gas flow velocity constant. The discharge voltage too remained almost constant with the change of electrode separation at the same gas flow velocity. This necessitated revision of the scaling laws for designing this type of high power CO₂ laser. Experimental results of laser performance for different electrode separations are discussed and the modifications in the scaling laws are presented.     

Reservoir operations optimization via fuzzy criterion decision processes

In this paper, we propose the treatment of complex reservoir operation problems via our newly developed tool of fuzzy criterion decision processes. This novel approach has been shown to be a more flexible and useful analysis tool especially when it is desirable to incorporate an expert’s knowledge into the decision models. Additionally, it has been demonstrated that this form of decision models will usually result in an optimal solution, which guarantees the highest satisfactory degree. We provide a practical exemplification procedure for the models presented as well as an application example.     

On the multi-attribute stopping problem with general value functions

We examine a sequential selection problem in which a single option must be selected. Each option's value is a function of its attributes, whose precise values can be ascertained at a given cost. We prove the optimality of a threshold stopping rule for a general class of objective functions.     

Radiation induced synthesis and swelling characterization of thermo-responsive N-isopropylacrylamide-co-ionic hydrogels

Two-component thermo-responsive hydrogels poly(N-isopropylacrylamide)-co-vinylbenzyltrimethylammonium chloride (NIPA-co-VBT) and poly(N-isopropylacrylamide)-co-p-sodium styrene sulphonate (NIPA-co-SSS) were prepared by using high energy gamma radiation. The gels were characterized by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and sol-gel analysis. The presence of ionic monomers in NIPA leads to lower gel content. Introduction of ionic components in the matrix enhanced swelling extent but caused slower volume transition. The swelling studies in alcohol indicated that swelling extent was function of polarity of the swelling medium and all gels followed the order water > methanol > ethanol > iso-propanol. In mixed co-solvents (water-alcohol), they exhibit complex reentrant behavior. The co-polymer gels containing VBT swelled faster and to higher extent than those containing SSS. The dynamic swelling studies indicated that diffusion of water in PNIPA gel shifts from Fickian for PNIPA to anomalous for NIPA-co-ionic gels also the mean swelling time (MST) decreases for gels containing ionic monomers.     

Planned positron experiments at FRM-II

The new research reactor FRM-II near Munich has a strong positron source, which delivers an intense, nearly monoenergetic positron beam. Our positron systems, the pulsed low energy positron source (PLEPS) and the scanning positron microscope (SPM) will be operated at this beam. Some aspects of matching these systems to the new positron source will be discussed.Considerable improvements are expected, e.g. more than 10⁵ s⁻¹ recorded events at PLEPS and sub-micrometre resolution at SPM. They will enable investigations in so far inaccessible problems like the evaluation of annihilation characteristics and trapping constants of individual defects or studies of fast dynamical processes. In applied materials science complex defect structures will be studied which demand a resolution into many differing lifetimes, e.g. fractured specimens, wear, corrosion, etc. Also large series of measurements at small systematic modifications are planned. There is also the opportunity to analyse in addition the chemical microstructure of the specimens by means of a hydrogen microprobe and other ion beam techniques available close to FRM-II at the Technical University of Munich.     

含R_2dtc配体Mo-Cu化合物的动态~(95)Mo NMR

本实验利用动态~(95)Mo NMR监测Mo-Cu系列化合物的形成过程,对反应CuCl+NaR_2dtc+MoO_nS,摩尔比3:3:1,溶剂为DMF;R=Et,n=0(Ⅰ);R=Me,n=0(Ⅱ);R=Et,n=2(Ⅲ)进行了研究,观察到具有不同簇骼的多种中间产物的存在及随反应进程相互转化等现象。     

ZnS:Tm的薄膜电致发光及激发过程

用电子束蒸发的方法制备了传统的双绝缘层的ZnS:Tm的薄膜电致发光器件，对其电致发光谱进行分析，在光致发光中，Tm离子受到基质ZnS的无辐射能量传递，而在电致发光中，Tm被过热电子碰撞激发而非能量传递，在所研制的电致发光器件中，稀土TmF3掺杂浓度不同，器件的发光性能也不同，在双绝缘层的ZnS:Tm的薄膜电致发光器件的基础上，改变器件的结构，发现器件的蓝光发射与红光发射之比增加，并对Tm离子可能的发光机理进行了探讨。     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

Electrochiroptical systems based on biphenyl-2,2′-diyl-type dicationic dyes: strong chiroptical signals through the transmission of point chirality to axial chirality

Huge CD amplitude (A = +538) was attained by diastereomeric preference (50% de) for the title dication with two bis[4-(R)-sec-butoxyphenyl]methylium units in benzene at 23 °C. Intramolecular π-π stacking is the origin for effective transmission of point chirality to axial chirality to attain the chiroptical enhancement of 400-times. Thanks to the strong CD signaling, chiroptical changes upon electrolysis could be readily detected, thus realizing a new class of electrochiroptical response systems. Chiroptical properties could also be modified by solvent polarity.