在"高聚物的结构与性能"课程中应该引入的几个新概念

在“高聚物的结构与性能”课程教学中，很有必要向学生介绍高分子科学近十几年来的发展，尤其是在高分子凝聚态基本物理问题上的研究成果以及相关的新概念、新知识，特别是我国学者的贡献。本文较为详细地讨论了近年来作者在教学中介绍的几个新概念，如：动态接触浓度、单链凝聚态、凝聚缠结等。     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Dynamic surface tension of micellar solutions studied by the maximum bubble pressure method. 1. Experiment

The effect of the micelles on the dynamic surface tension of micellar surfactant solutions is studied experimentally by means of the maximum bubble pressure method. Different frequencies of bubbling ranging approximately between 1 and 30 s^–1 are applied. The time dependence of the surface tension is calculated using a dead time correction. Water solutions of two types of surfactants with different concentrations are investigated: sodium dodecyl sulfate and nonylphenol polyglycol ether. The surface tension relaxes more quickly in the presence of micelles. The characteristic times of relaxation of the surface tension seem to be in the millisecond range. The time constants observed experimentally are explained in terms of the theory of surfactant diffusion affected by micellization kinetics.     

Dynamic ultrasound-assisted extraction of polyphenols in tobacco

A novel extraction method, namely dynamic ultrasound-assisted extraction, is investigated. This technique is efficient with respect to both time and solvent consumption because it utilizes ultrasonic energy in dynamic mode during extraction. Polyphenols (chlorogenic acid, esculetin, rutin, scopoletin, and quercitrin) are extracted from a tobacco (Nicotina tobaccum L.) sample for 10 min with 6 mL of solvent. Fresh solvent is continuously pumped through the sample, with which the analytes can be rapidly extracted, and the possibility of degradation efficiently avoided. Methanol involving 0.5% w/v ascorbic acid was used as extraction solvent; optimal flow rate and extraction time were investigated. The extract was cleaned up by C18 disposable cartridge. The spiked and nonspiked tobacco samples were used for the evaluation of the proposed method. Recoveries obtained were varied from 96 to 108% and RSDs from 2.0 to 4.6%. This extraction technique was revealed to recover larger amounts of polyphenols from tobacco, compared to the static ultrasound-assisted extraction method.     

对DSC单峰纯度测定法的评述

指出了当前流行的差示扫描量热法DSC单峰法测样品纯度所基于的假定有一些不确切的地方,并用计算机动态摸拟了DSC实验过程,结果证实了本文的论断。     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Facile hydrothermal construction of Nb_2CT_x/Nb_2O_5 as a hybrid anode material for high-performance Li-ion batteries

Herein,a simple yet efficient hydrothermal strategy is developed to in-situ convert multi-layered niobium-based MXene(Nb_2 CT_x) to hierarchical Nb2 CTx/Nb_2O_5 composite.In the hybrid,the Nb_2O_5 nanorods are well dispersed in and/or on the Nb_2 CTx.Thanks to the synergetic contributions from the high capacity of Nb_2O_5 and superb electrical conductivity of the two-dimensional Nb_2 CT_x itself,the resultant Nb_2 CTx/Nb_2O_5 hybrid exhibits excellent rate behaviors and stable long-term cycling behaviors,when evaluated as anodes for Li-ion batteries.     

New dynamic axial compression columns with means for monitoring floating adapter position. Column design and utilisation in low pressure LC on soft packings

Summary The design of new dynamic, axial-compression columns with a system for continous packed bed adjustment and monitoring of the floating adapter position is described. The columns are meant for liquid chromatography at low pressures (up to 8 bar) in aqueous and organic media with stationary phases of all types. The columns have adapter position pickups for continuous automatic monitoring of the bed height (original “swellographic” monitoring). The column described with gas pressurisation was tested with soft Sephadex G-10 and G-25. In spite of the reduction in external porosity there was no dramatic increase in back-pressure. The column proved to provide long-term stability of the packed bed and improvement in resolution. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Transition metal 1,2-bidentate thiolates as building blocks and their construction into cluster complexes

Simple fragments of transition metal 1,2-bidentate thiolates, the so-called building blocks of the general compositions ML₃, ML₂, ML, M(O)L₂, ML₂L, MLL, etc. have been proposed to constitute the di-, tri- and tetranuclear complexes concerned in this review. Structureal regularities and characteristics have been discussed and summarized according to the thiolato ligands edt and pdt, bdt and tdt, mp, and mpo, and mpp, respectively.Abbreviations H₂mpo o-mercaptophenol - Hmpo 2-mercaptopyridine-N-oxide - R₂dtc N,N-dialkyldithiocarbamate - Haet 2-aminoethanethiol - H₂bdt o-benzenedithiol - H₂pdt 1,2-propanedithiol - H₂tdt toluene-3,4-dithiol - Hmpp-mppH bis-(3-hydroxy-2-pyridyl)disulfide - Hmp-mpH bis-(2-oxyphenyl)disulfide - H₂edt 1,2-ethanedithiol - dppe 1,2-bis(diphenylphosphino)ethane - H₂tedt 3,4,5,6-tetrachlorobenzene-1,2-dithiol - H₂tpdt 3-thiapentane-1,5-dithiol - H₂mnt maleonitriledithiol - Him imidazole - Bz benzyl - py pyridine     

A density-functional calculation of dynamic dipole polarizabilities of noble gas atoms

Using a very simple trial function and unperturbed electron densities calculated by a new procedure, the frequency-dependent dipole polarizability () of Ne, Ar, Kr and Xe has been calculated in the range 0 0.45 a.u., by a Karplus-Kolker-type variation-perturbation method. Results progressively worsen for larger systems so that, for Xe, (0) is only 75% of the experimental value. Probable reasons for this are discussed.