修理设备可更换且修理有延迟的两不同型部件并联可修系统

假定部件的寿命服从指数分布,其修理延迟时间和修理时间均服从一般分布,并且修理设备的寿命服从指数分布,其更换时间服从一般分布,利用马尔可夫更新过程理论和一种新的分解方法,研究了修理设备可更换且修理有延迟的两不同型部件并联可修系统,求得了系统和修理设备有关可靠性指标的一系列结果.     

Electrochemical characteristics of the blended polymer electrolytes containing lithium salts

Blend-based polymer electrolytes composed of poly(ethylene oxide), poly(oligo[oxyethylene]oxysebacoyl), and lithium salts have been prepared. These polymer electrolytes have been investigated in terms of ionic conductivity, transport number, and interfacial characteristics of the lithium electrode in contact with the polymer electrolyte. The influences of the blend composition, the salt used, and its concentration on the electrochemical behavior were studied. © 1996 John Wiley & Sons, Inc.     

正整数的一类三分拆的应用

利用正整数n的一类特殊的3分拆n=n1+n2+n3,n1>n2>n3≥1,且n2+n3>n1的Ferrers图将不定方程4x1+3x2+2x3=n(n≥9)的正整数解与这种分拆联系起来,从而得到了该不定方程的正整数解数公式;同时也给出了正整数n的一类4分拆的计数公式.此外,还给出了周长为n的整边三角形的计数公式的一个简单证明.     

超声波燃气表矩形流道的雷诺修正系数仿真研究

在超声波流量计测量技术中, 雷诺修正系数相关的研究对于提高计量精度有重要作用. 为研究矩形流道的雷诺修正系数与雷诺数的关系, 对矩形流道在常温常压流量较小情况下进行仿真, 结果发现: 矩形流道层流状态下的雷诺修正系数与雷诺数呈线性相关. 保持压强、体积流量不变, 在不同温度下进行仿真及拟合, 结果表明: 在不同温度下雷诺修正系数与雷诺数的线性关系依然满足. 在上述实验基础上, 对矩形流道湍流状态下的雷诺修正系数与雷诺数关系进行研究, 通过改变温度、压强和体积流量进行仿真及拟合发现, 矩形流道湍流状态下雷诺修正系数与雷诺数呈非线性相关.     

弱耦合多原子半无限晶体中磁极化子的激发能量

近年来国内外对多原子极性晶体中磁极化子性质的研究十分活跃,Zorkani等采用变分法计算了束缚磁极化子的基态能量,Kandemir等采用束缚朗道态讨论了二维大磁极化子的基态和第一激发态能量,国内一些学者采用微扰法和新颖算符法讨论了多原子极性晶体中表面和体磁极化子的性质。采用线性组合算符和幺正变换,研究磁场中多原子半无限极性晶体中电子和光学声子弱耦合相互作用所产生的极化子的第一激发态能量及平均声子数。结果表明:当电子无限接近晶体表面时,磁极化子的基态能量仅为Landau能量;第一激发态能量为Landau基态能量的2倍;平均声子数等于各支与电子耦合的体光学声子数和表面光学声子数之和。而当电子处于晶体深处时,磁极化子的基态能量却为Landau基态能量与各支体光学声子以及表面光学声子分别耦合的能量之和;第一激发态能量仍为Landau基态能量的2倍;平均声子数等于各支与电子耦合的体光学声子数和与所处深度有关的各支体光学声子数之和,而与各支表面光学声子无关。     

Application of wake oscillators to two-dimensional vortex-induced vibrations of circular cylinders in oscillatory flows

A nonlinear time-domain simulation model for predicting two-dimensional vortex-induced vibration (VIV) of a flexibly mounted circular cylinder in planar and oscillatory flow is presented. This model is based on the utilization of van der Pol wake oscillators, being unconventional since wake oscillators have typically been applied to steady flow VIV predictions. The time-varying relative flow–cylinder velocities and accelerations are accounted for in deriving the coupled hydrodynamic lift, drag and inertia forces leading to the cylinder cross-flow and in-line oscillations. The system fluid–structure interaction equations explicitly contain the time-dependent and hybrid trigonometric terms. Depending on the Keulegan–Carpenter number (KC) incorporating the flow maximum velocity and excitation frequency, the model calibration is performed, entailing a set of empirical coefficients and expressions as a function of KC and mass ratio. Parametric investigations in cases of varying KC, reduced flow velocity, cylinder-to-flow frequency ratio and mass ratio are carried out, capturing some qualitative features of oscillatory flow VIV and exploring the effects of system parameters on response prediction characteristics. The model dependence of hydrodynamic coefficients on the Reynolds number is studied. Discrepancies and limitations versus advantages of the present model with different feasible solution scenarios are illuminated to inform the implementation of wake oscillators as a computationally efficient prediction model for VIV in oscillatory flows.     

Flow induced oscillation of two rigid rectangular plates in a side-by-side configuration

The present work is an experimental study of two oscillating rigid plates placed in side-by-side configuration, hinged at their leading edges, subjected to low subsonic flow. This problem is investigated using smoke-wire flow visualization, hot-wire anemometry, and time resolved particle image velocimetry. It is found that beyond a critical Reynolds number, the plates set into oscillatory motion. This critical Reynolds number depends on the gap between the plates. It is also seen that this value of Reynolds number, at lower values of gap to thickness ratio (<7) is significantly higher than that of the single plate configuration value. The frequency and amplitude of the oscillating plates at various gaps and Reynolds numbers have been studied and compared with the characteristics of an oscillating single plate. It is also found that depending on the gap and acceleration of the free-stream, there exist two modes of oscillation - (i) in-phase and (ii) out-of-phase. For gap to thickness ratio less than 10, only in-phase oscillations take place for all values of free-stream velocity considered in the present work, whereas, when this ratio is greater than 10, the mode of oscillation depends on the initial conditions up to a certain free-stream velocity, beyond which the plates switch to in-phase mode. Smoke wire flow visualization technique along with time resolved particle image velocimetry reveal that the vorticity distributions around the plates are responsible for the initiation of the two modes of oscillations.     

柴油中正构烷烃的高温气相色谱分析

利用高温气相色谱法对柴油中正构烷烃的碳数分布及含量进行了分析。同时根据所得数据计算出正构烷烃的平均相对分子质量及平均碳原子数。试验表明,气相色谱的最佳测定条件为：柱初温60℃,柱终温330℃,升温速率6℃／min,汽化室温度350℃。分析出吐哈两种柴油中C11～C19的正构烷烃均占分析总量的75％以上,吐哈0^#与-10^#柴油正构烷烃的平均相对分子质量、平均碳原子数分别为214．57、15．18和203．34、14．38。所得数据为设计研究针对吐哈原油有效降凝剂提供了参考数据。     

微钢管内部强迫对流换热的实验研究

本文对以蒸馏水为工质,流过内径和外径分别为168μm、406μm和399μm、798μm的电加热不锈钢管时的换热进行了实验研究。通过对微钢管直接通电进行加热,并采用红外成像仪及专用放大镜头的非接触式方法,获得了各种恒定加热功率及不同雷诺数下的微钢管壁面的温度场分布,进而得到较为精确的壁面平均温度。由此计算了在层流态下的换热系数Nu数。实验结果表明,在层流下,内径为168μm及399μm的微钢管内部的Nu数分别比经典的Hansen准则式所得到的Nu数高出很多。     

滑块碰撞动力学与圆周率的关联

滑块碰撞与圆周率π看似不相关的两个事物却具有某种联系,本文研究了滑块碰撞动力学,利用计算工具MATLAB,发现在理想情况下,滑块的碰撞次数与π有一定的关联,并在理论上证明了计算结果。