应用单波段亮度变化率获取无云干扰的卫星数据

在卫星遥感检测中,云对数据的反演带来了严重的干扰。精确地确定云区及减弱云的干扰是具有挑战性的问题。根据云的大气辐射特性给出了卫星图像亮度变化率计算公式、图像反射率的变化率计算公式和热红外波段图像亮度温度变化率的计算方法。利用单波段亮度变化率检测卫星数据中云干扰相对强度的新方法,快速、精确地获取云区位置,得到云区以外无云干扰的数据。根据各光谱波段具有不同的透射云层能力的特点,文章还给出了卫星各红外波段对云层透射能力的客观评价以及影响透射效果的因素。在此基础上利用红外波段对伪卷云透射图像数据完成了多波段数据融合。很好地恢复了可见光波段云区下面的真实数据。统计数据表明,融合后的云区图像数据与可见光波段相关性保持一致。     

小波系数压缩用于柴油十六烷值近红外光谱分析建模

近红外光谱分析建模中存在多变量高维数据处理问题,导致计算量大,不利于过程控制中应用.为此提出利用小波变换压缩近红外光谱数据的算法与准则,并结合柴油十六烷值定量分析研究压缩数据的建模效果.研究表明,经小波方法处理后,变量维数压缩30倍左右,光谱主要信息基本保留,而模型的预测精度和常规预处理方法分析相比有明显提高.光谱数据压缩的同时包含了噪声滤除和基线校正,简化数据处理步骤,有利于NIRS实际应用时提高建模效率.     

Scaling characteristics of ocean wave height time series

Fluctuations in the significant wave height can be quantified by using scaling statistics. In this paper, the scaling properties of the significant wave height were explored by using a large data set of hourly series from 25 monitoring stations located off the west coast of the US. Detrended fluctuation analysis (DFA) was used to investigate the scaling properties of the series. DFA is a robust technique that can be used to detect long-range correlations in nonstationary time series. The significant wave height data was analyzed by using scales from hourly to monthly. It was found that a common scaling behavior can be observed for all stations. A breakpoint in the scaling region around 4-5 days was apparent. Spectral analysis confirms this result. This breakpoint divided the scaling region into two distinct parts. The first part was for finer scales (up to 4 days) which exhibited Brown noise characteristics, while the second one showed 1/f noise behavior at coarser scales (5 days to 1 month). The first order and the second order DFA (DFA1 and DFA2) were used to check the effect of seasonality. It was found that there were no differences between DFA1 and DFA2 results, indicating that there is no effect of trends in the wave height time series. The resulting scaling coefficients range from 0.696 to 0.890 indicating that the wave height exhibits long-term persistence. There were no coherent spatial variations in the scaling coefficients.     

一种复杂多边形最大内圆的快速查找算法

任意多边形的最大内圆的快速查找在多个领域有着重要的应用。首先给出了任意多边形的Voronoi图的生成方法,以及基于Voronoi图实现该多边形的最大内圆的寻找算法,在此基础上分别采用中线简化及并行化处理对算法进行了效率方面的改进,并重点研究了矢量数据并行化过程中的数据分配策略,给出了其最优数据划分策略——算法复杂度均衡法。最后对北美阿拉斯加地区的多个湖泊进行了最大内圆的查找实验,相应的实验结果表明,改进的方法能够很大程度地提高最大内圆的查找效率。     

应用理性优化蚁群算法提高激光三维复制的重现度

三维复制人工耳和打印手枪把激光三维复制技术推向新的一页。激光三维扫描是激光应用中一个新兴的重要领域,在三维复制中扮演着无可替代的角色,其复制精度在目前所有复制技术中是最高的。而重现度标志着复制结果与复制对象几何形状上的一致程度,是激光三维复制最重要的指标。分析了激光三维复制的误差,得出激光扫描的点云数据处理是减小误差、提高重现度的关键所在的结论。主要创新点在于,在传统蚁群算法的基础上,将提出理性优化蚁群算法应用于激光三维复制中的数据处理。经计算对比发现,有效减小了复制的误差,提高了复制的重现度。     

热声驱动系统中的压力测量

介绍了自制的用于热声驱动脉管制冷装置的计算机压力波数据采集系统。该系统由硅压电压力传感器、数据采集卡、PC机和基于 Labview软件的图形化用户界面 GUI( Graphical User In-terface)组成。试验证明 ,它具有结构简单、高效精确、操作简便等特点 ,在捕捉被测系统内的动态压力变化方面具有优势 ,不但能很好地满足热声驱动器的压力测量要求 ,而且亦可移植到任何类似的测量气体压力的场合     

基因芯片荧光图象采集与分析

描述了基因芯片荧光图象的光学共聚焦成象,大范围高速扫描与控制,数据采集的原理和方法.并讨论了基因芯片荧光图象的分析算法,即模板定位与阈值分割相结合的半自动算法,并将其计算结果与完全采用人工分割算法的结果进行了比较.     

Data-fusion of high resolution X-ray CT,SEM and EDS for 3D and pseudo-3D chemical and structural characterization of sandstone

When dealing with the characterization of the structure and composition of natural stones, problems of representativeness and choice of analysis technique almost always occur. Since feature-sizes are typically spread over the nanometer to centimeter range, there is never one single technique that allows a rapid and complete characterization. Over the last few decades, high resolution X-ray CT (μ-CT) has become an invaluable tool for the 3D characterization of many materials, including natural stones. This technique has many important advantages, but there are also some limitations, including a tradeoff between resolution and sample size and a lack of chemical information. For geologists, this chemical information is of importance for the determination of minerals inside samples. We suggest a workflow for the complete chemical and structural characterization of a representative volume of a heterogeneous geological material. This workflow consists of combining information derived from CT scans at different spatial resolutions with information from scanning electron microscopy and energy-dispersive X-ray spectroscopy.     

一种车用单刀双掷开关的质检仪器研发

介绍了一种车用单刀双掷开关质量检测仪器的研发,包括检测系统的硬件设计、检测原理以及算法软件开发。首先,根据单刀双掷开关的工作原理及质量检测要求,开发了检测手指触觉压力的机械装置,以及控制开关通道切换的继电器控制电路;在此基础上,开发了相应的检测算法,可实现对开关切换状态、电压差以及手指触觉压力进行自动化的数据采集、分析、检测和判断,从而挑选出合格的开关;最后,设计了触屏人机交互界面,可实时显示产品检测的参数。该检测设备在某自动化生产线上经过近一年时间的检测验证,证明系统运行平稳,检测效果良好、误检率低,可以完全取代传统的人工检测方式,提高了开关的检测效率,降低了检测人员的工作量。     

双通道高速数据采集处理平台的设计与实现

为满足数字式测向接收机对高速数据采集和处理的需求,研制了高速数据采集处理平台,该平台基于ADC12D1800RF模数转换器实现了两路1.35GHz中频信号的带通采样,以Xilinx公司V7系列FPGA为数据处理器,采用高速DDR3作为存储设备解决了海量数据存储问题,并通过高速串行接口（GTX/SRIO）实现了大容量数据的实时传输。该平台的测试结果为：1.8GHz采样率时有效位数大于8bit,DDR3存储器的工作主频可达1333MHz,GTX接口在10Gbps速率下工作时,其误码率小于10-9,上述测试结果表明该平台可以高速、准确地实现信号采集、数据传输、存储和处理,达到了预期设计目标。