Dynamics of joint adsorption of mutually soluble substances by activated carbons

A model for the dynamics of isothermal absorption of a binary mixture of an organic substance, soluble in water, and water vapor in a fixed bed of activated carbon was proposed. It includes the equations of material balance and the Myers—Prausnitz model for equilibrium adsorption. The possibility of formation of the condensed phase during the adsorption of an organic substance on moist activated carbon was shown. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1491–1495, August, 1998.     

Computer simulation of the steady state currents at enzyme doped carbon paste electrodes

The plate-gap model of porous enzyme doped electrode has been proposed and analyzed. It was suggested that reaction diffusion conditions in pores of bulk electrode resemble particular conditions in thin gap between parallel conducting plates. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis–Menten kinetic of the enzymatic reaction inside gap. Steady state current was calculated for the wide range of given parameters and substrate concentrations. All dependences of current on substrate concentration were approximated by hyperbolas in order to obtain “apparent” parameters (maximal currents and apparent Michaelis constants) of modelled biosensors. Simple approximate relationships between given and apparent parameters were derived. The applicability of theoretical plate-gap model was tested for the case of carbon paste electrodes which were doped with PQQ – dependent glucose dehydrogenase. It was found, that soluble glucose dehydrogenase based biosensors exhibit characteristic features of the theoretical plate-gap biosensors.     

Synthesis of an optically active intermediate for A-ring of 19-nor- 1α,25-dihydroxyvitamin D3

An optically active intermediate 5 for A-ring of 19-nor-1a,25-dihydroxyvitamin D3 2 has been synthesized in five steps, starting from readily available, inexpensive D( )-xylose 6 with good yield.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

A theoretical analysis of modulation noise and dc erased noise in magnetic recording

The modulation noise and the special case, dc erased noise in magnetic recording are discussed theoretically, taking account of two main causes at the same stage, i.e. the magnetic properties such as the inhomogeneous distribution of the particles on the tape, and the mechanical properties such as the head-to-tape space variations arising from the tape surface roughness. We derive the signal as well as the noise power spectrum of the induced voltage at the read head. This is done by generalizing the theory of the signal behaviour. The theoretical result turned out to agree quite well with the experimental one. The modulation noise power spectrum can be interpreted to consist of two parts, i.e. the steep peak due to the mechanical causes near the recorded signal wavenumber and the broad peak due to magnetic causes.Nomenclature A(k) variable defined by(Km_av L _g L _d)² - d head-to-tape spacing [m] - d _av average value ofd [m] - d variance ofd [m] - D variable defined by (8) - e(t) induced voltage at the read head [V] - g gap length [m] - H the Karlqvist head field excited by a current uniti [A/m] - i a curren unit [A] - j –1 - k=¦k¦ wavenumber [m^–1] - k _c wavenumber of recorded signal [m^–1] - K constant which includes the number of turn of head, the read head efficiency and the permeability ₀[Vs/Am] - l _d correlation length of the variationd [m] - l _m correlation length of the variationm [m] - L _d (k) spacing loss defined by exp(–kd_av) - L _g (k) gap loss defined by sin(gk/2)/(gk/2) - M magnetization of the tape [A/m] - M variable defined by (8) - m amplitude of the magnetization of the signal pattern [A/m] - m _av average value ofm [A/m] - m variance ofd [A/m] - P(k) power spectrum [V²/Hz] - P _dc(k) noise power spectrum [V²/Hz] - S signal pattern of the tape - v relative velocity between the head and the tape [m/s] - x _t =(x _t ,y_t) coordinate on the tape - (x ₀,y₀) coordinate fixed on the read head - (x ₁,y₁) coordinate defined by (10) - tape thickness [m] - _d random phase variable defined by (8) - _m random phase variable defined by (8) - _O permeability [Vs/Am] - read-head detected flux [Wb]     

Amperometric Biosensor for Hydrogen Peroxide Based on Electrodeposited Sub-micrometer Gold Modified Glassy Carbon Electrode

IntroductionAmperometricbiosensorofhydrogenperoxideisofpracticalimportancebecauseofitswideapplicationsinchemical,biological,clinical,environmentalandmanyotherfields.Forimprovementofsensor抯quality,vari-ouskindsofchemicalmodificationmethodshavebeendevelopedforreducingredoxoverpotentialsofH2O2atelectrodesurfaces,increasingthedetectionsensitivity,linearrange,stabilityandlivetime.Ithasbeenshownthattheuseofsub-micrometersizedmetalparticlessuchasPt-blackcansignificantlyimprovethequalityofthebiosens…     

直接甲醇燃料电池阳极电催化剂

直接甲醇燃料电池作为未来清洁的动力能源，由于具有下列优点：操作温度低(<100℃)、燃料易储存和运输、能量效率高、污染低和燃料启动快而受到人们广泛的关注。阳极电催化剂是直接甲醇燃料电池最重要的组成部分。本文综述了近三年来直接甲醇燃料电池阳极电催化剂最新的研究进展，主要对催化剂制备方法、新型碳载体材料、催化剂类型作了详细的评述，展望了未来甲醇电催化氧化催化剂的发展，指出了电催化剂面临的问题。     

碳纳米管为基质对氨基酸的MALDI-FT MS分析

Twenty common amino acids have been analyzed successfully by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) using carbon nanotubes as matrix. From the spectra, little or no background interference or fragmentation of the analytes has been observed. This method was also applied to the analysis of amino acid mixture successfully. Carbon nanotubes have some features such as large surface area to disperse the analyte molecules sufficiently and prevent the sample aggregation and strong ultraviolet absorption to transfer energy easily to the analyte molecules. The present method has potential application for the rapid and sensitive analysis of amino acids and their mixture.     

Determination of the Thermal Degradation Kinetic Parameters of Carbon Fibre Reinforced Epoxy Using TG

In this work, a kinetic study on the thermal degradation of carbon fibre reinforced epoxy is presented. The degradation is investigated by means of dynamic thermogravimetric analysis (TG) in air and inert atmosphere at heating rates from 0.5 to 20°C min⁻¹ . Curves obtained by TG in air are quite different from those obtained in nitrogen. A three-step loss is observed during dynamic TG in air while mass loss proceeded as a two step process in nitrogen at fast heating rate. To elucidate this difference, a kinetic analysis is carried on. A kinetic model described by the Kissinger method or by the Ozawa method gives the kinetic parameters of the composite decomposition. Apparent activation energy calculated by Kissinger method in oxidative atmosphere for each step is between 40–50 kJ mol⁻¹ upper than E _a calculated in inert atmosphere. The thermo-oxidative degradation illustrated by Ozawa method shows a stable apparent activation energy (E _a ≈130 kJ mol⁻¹ ) even though the thermal degradation in nitrogen flow presents a maximum E _a for 15% mass loss (E _a ≈60 kJ mol⁻¹ ). This revised version was published online in July 2006 with corrections to the Cover Date.     

Superfast electrophoresis of electron-type conducting particles

The features of concentration polarization caused by electric current through a unipolar conductive particle are considered. The peculiarities of the formation of an induced space charge near a particle with electron-type conductivity are analysed. It has been shown that the theoretical values of electrophoretic velocity for these particles are essentially smaller than those calculated for particles with ion-type conductivity.A new method to observe the superfast electrophoresis is developed. The electrophoretic velocity of graphite and activated carbon particles of different size (diameter, 200–500 μm) displaced in distilled water and electrolyte solutions in strong electric fields (100–500 V cm⁻¹) was measured. It is shown that, in contrast to classical electrophoresis, the electrophoretic mobility of such particles increases with the particle size and the external field strength. The experimental and theoretical results are compared. The discrepancy between theory and experiment is analysed.