In situ X-ray observation of phase transformation in Fe2O3 at high pressures and high temperatures

A laser-heated sample in a diamond anvil cell and synchrotron X-ray radiation was used to carry out structural characterization of the phase transformation of Fe₂O₃ at high pressures (30-96 GPa) and high temperature. The Rh₂O₃(II) (or orthorhombic perovskite) structure transforms to a new phase, which exhibits X-ray diffraction data that are indicative of a CaIrO₃-type structure. The CaIrO₃-type structure exhibited an orthorhombic symmetry (space group: Cmcm) that was stable at temperatures of 1200-2800 K and pressure of 96 GPa (the highest pressure used). Unambiguous assignment of such a structure requires experimental evidence for the presence of two Fe species. Based on the equation of state of gold, the phase boundary of the CaIrO₃-type phase transformation was P (GPa)=59+0.0022×(T−1200) (K).     

基于可调谐光纤激光器的C2H2气体光声光谱检测

研制了基于可调谐掺Er光纤激光器的共振式光声光谱乙炔气体检测系统,结合波长调制和锁相放大器的二次谐波信号检测技术,有效地消除了光声池窗片和池壁吸收入射光而引起的背景噪声,通过对该系统的光学、声学和电子检测系统的优化,实现了低浓度乙炔气体的流动式检测.实验结果证明,当气体浓度较低时,二次谐波振幅与气体浓度成正比,其线性响应相关度达到0.999 53.在常温常压和3.5 mW平均光功率以及100 ms锁相积分时间条件下,乙炔气体的极限检测灵敏度达到了0.3 ppm(1 ppm=1μg·mL-1)(SNR=1时),系统用可调谐掺Er光纤激光器代替半导体激光器作光源,降低了成本,为发展低成本、实用、便携式微量气体光谱榆测仪器奠定了基础.若采用多光程光声池,或者采用EDFA提高激光功率,可大幅度提高信噪比,将极限检测灵敏度提高至ppb(1 ppb=1 ng·mL-1)量级.     

变耦合系数非线性三波导定向耦合器特性研究

报道了对高斯型及指数型变耦合系数三波导耦合器的一些重要的全光开关特性进行的研究。利用四阶龙格一库塔方法对指数型和高斯型两类变耦合系数三波导耦合器进行了数值计算。数值计算结果表明：对于变耦合系数三波导耦合器而言,功率可在波导1与波导3之间100％转换,而波导2则不可能达到100％的功率输出。与双波导变耦合系数耦合器相比,在相同的最大耦合系数情况下三波导变耦合系数耦合器开关曲线要更陡一些．即具有更好的开关特性。与平行三波导耦合器相比,变耦合系数三波导耦合器作为光开关的最大优点在于开关曲线中不存在振荡。     

光纤热极化过程的实时测试研究

通过热极化可以使中心对称的熔石英光纤中产生二阶非线性效应和线性电光效应。为了解各热极化过程参量对热极化产生的线性电光效应的影响,利用全保偏光纤马赫一曾德尔干涉仪构造了一套光纤热极化的实时线性电光效应测试系统,并利用其进行了光纤热极化全过程的监控测试。在线测试了热极化过程的一些参量,例如极化电压、极化时间、以及极化温度等对热极化光纤中产生的线性电光效应的影响。实时测试研究表明,在光纤中施加尽可能高的极化电场将可能在光纤中产生较高的线性电光效应。对侧边抛磨光纤结构的热极化器件,考虑到器件的抗强电场击穿能力,可选用3．o～4．0kV左右的极化直流电压。当施加3．0kV左右的极化电压时,热极化优化时间约为16min,最佳热极化加热温度约为190℃。     

圆芯型边孔光纤双折射的有限元分析

对网芯型边孔光纤固有双折射的研究结果进行了报道。在对边孔光纤固有烈折射的产生机理和计算原理进行研究的基础之上,采用有限元法分析了网芯型边孔光纤的内部应力分布和双折射的大小。研究结果表明圆芯型边孔光纤的几何双折射较小,以应力双折射为主;边孔的存在导致光纤纤芯和包层区域的应力分布发生了较大的变化。文章提出了两边孔的连线方向为边孔光纤的快轴方向．并就不同的边孔结构对光纤双折射的影响进行了研究,发现网芯网孔型边孔光纤的同钉双折射随边孔张角的增加而成指数关系增长．可通过增大边孔半径和减小两孔间距提高边孔光纤的双折射。     

一种新型的基于四孔单元光子晶体光纤的设计与分析

设计了一种基于四孔单元的光子晶体光纤,它可以满足光通信系统中高双折射率、负色散和低限制损耗的要求,比起通常的三角结构光纤有着更高的双折射率,并且结构制作也较简单。采用全矢量有限元法和各项异性完美匹配层法对所设计的光纤进行了仿真研究。仿真结果表明:该光纤在1.55μm波长处可获得10~(-2)数量级的双折射率,在较宽广的波段范围具有大的负色散,限制损耗低于10~(-9)dB/m;该光纤在保偏光纤、单极化单模光纤、色散补偿光纤等方面具有重要的应用。     

采用铯原子偏振光谱对894.6nm外腔式半导体激光器稳频的实验研究

通过铯原子D_1线超精细跃迁能级的偏振光谱获得鉴频曲线,利用电子伺服系统将鉴频曲线反馈到894.6nm外腔式半导体激光器的压电陶瓷上进行锁定。由于偏振光谱技术不需要对激光器进行调制,因此不会带来额外的噪声。激光器自由运转400s内频率起伏为2.35 MHz,采用偏振光谱锁定激光器后400s内频率起伏为0.95 MHz,有效抑制了激光器的频率起伏。     

Novel metrics and methodology for the characterisation of 3D imaging systems

The modelling, benchmarking and selection process for non-contact 3D imaging systems relies on the ability to characterise their performance. Characterisation methods that require optically compliant artefacts such as matt white spheres or planes, fail to reveal the performance limitations of a 3D sensor as would be encountered when measuring a real world object with problematic surface finish. This paper reports a method of evaluating the performance of 3D imaging systems on surfaces of arbitrary isotropic surface finish, position and orientation. The method involves capturing point clouds from a set of samples in a range of surface orientations and distances from the sensor. Point clouds are processed to create a single performance chart per surface finish, which shows both if a point is likely to be recovered, and the expected point noise as a function of surface orientation and distance from the sensor. In this paper, the method is demonstrated by utilising a low cost pan-tilt table and an active stereo 3D camera. Its performance is characterised by the fraction and quality of recovered data points on aluminium isotropic surfaces ranging in roughness average (Ra) from 0.09 to 0.46 µm at angles of up to 55° relative to the sensor over a distances from 400 to 800 mm to the scanner. Results from a matt white surface similar to those used in previous characterisation methods contrast drastically with results from even the dullest aluminium sample tested, demonstrating the need to characterise sensors by their limitations, not just best case performance.     

覆膜长周期光纤光栅在生化分析中的应用及研究进展

总结了纳米薄膜修饰的长周期光纤光栅在折射率生物传感器方面的研究进展,重点介绍了纳米薄膜对长周期光纤光栅折射率传感性能的影响,详细阐述了覆膜长周期光纤光栅在生化分析检测领域的应用,并对其在折射率传感方面的应用前景作了展望。     

Block （or Hamiltonian） Lie Symmetry of Dispersionless D-Type Drinfeld-Sokolov Hierarchy

In this paper, the dispersionless D-type Drinfeld-Sokolov hierarchy, i.e. a reduction of the dispersionless two-component BKP hierarchy, is studied. The additional symmetry flows of this hierarchy are presented. These flows form an infinite-dimensional Lie algebra of Block type as well as a Lie algebra of Hamiltonian type.