Synthetic,spectroscopic, and structural Studies on Lanthanide Complexes of Diphosphazane Dioxide Ligands

Lanthanide nitrate complexes of diphosphazane dioxides Ph₂P(O)N(Prⁱ)P(O)Ph₂ ( 1 ) and (PhO)₂P(O)N(Me)P(O)(OPh)₂ ( 2 ) have been synthesised and studied by conductometry, IR, multinuclear NMR spectroscopic methods and X-ray diffraction. Ligand 2 is accessible by two different methods, viz., by direct oxidation of the phosp(III)azane ligand or by starting from phosph(V)azane chloro precursor. The structure of 2 is confirmed by X-ray diffraction. Crystallographic data for 2 : Triclinic, Space group P1 , a = 10.078(1), b = 10.575(3), c = 12.364(4) Å, α = 75.70(2)°, α = 75.56(1)°, γ = 77.68(1)°, Z = 2, V = 1 220 ų; structure refined to R_F = 0.0459 on 3 495 data with F > 3σ(F). The diphosphazane dioxide ligand exhibits trans geometry in the solid state. The structure of a lanthanide complex, [Pr(NO₃)₃( 2 )₂] ( 14 ) is also determined by X-ray diffraction. Crystallographic data for 14 : Trigonal, Space group P3₂, a = b = 15.710(2), c = 40.067(2) Å, Z = 6, V = 8 564 ų; structure refined to R_F = 0.0430 on 8 077 data with F > 5σ(F). The two diphosphazane dioxide ligands and the nitrate groups are coordinated to praseodymium in a bidentate chelate fashion. The geometry around the ten coordinated metal is distorted bicapped square antiprism.     

Comparison of the Temperature Effect on the π∗←n and π∗←π Electronic Transition Bands of NO<Subscript>3</Subscript><Superscript>−</Superscript>(aq)

The effect of temperature on the π∗←π transition band in the UV absorption spectrum of NO₃⁻(aq) centered at ≈200 nm was studied in the temperature range 10–70 ^∘C. The observed temperature independence of this band was in contrast to the significant influence of temperature on the nitrate π∗←n transition reported recently by us. However, taking into account the electronic states involved in both the transitions, it was concluded that this finding was in accordance with our previous assumption that interconversion between spectrally distinct (with respect to π∗←n band) nitrate species included the rupture/formation of hydrogen bond(s) in the hydration shell of the nitrate ion.     

6291型热变形温度和维卡软化温度测试仪的校准及故障排除

介绍6291型热变形温度和维卡软化温度测试仪的温度校准和位移校准方法，对测试仪的一些常见故障，例如电源故障，主温度传感器故障，电加热系统控制单元故障及测试站的温度偏差较大等进行了分析，并给出了排除故障的方法。     

一步室温固相化学反应合成纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O

以Keggin结构的钼磷酸(H3PMo12O40·13H2O)与苯丙氨酸(Phe)为原料,利用一步固相化学反应于室温合成了纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O,采用元素分析,IR,XRD,TEM,UV和循环伏安法等手段对其进行了结构表征及性质研究.结果表明,标题化合物纳米粒子为均匀的球状,粒径约为30～40nm.该化合物中杂多阴离子部分仍保持Keggin结构,但在钼磷酸与苯丙氨酸之间发生了显著的电荷转移.     

Effect of film thickness and supercooling on the performance of cholesteryl cinnamate liquid crystal capillary columns

Improved separations of the isomers of olefinic aliphatic insect pheromones were obtained on cholesteryl cinnamate glass capillary columns by operating in the supercooled temperature range of the liquid crystal. Capillary columns were prepared with varying film thickness of the stationary phase; choice of the correct film thickness ensured optimum retention for a wide range of compounds within the most effective temperature range of the liquid crystal. The deactivation procedures described made the liquid crystal columns suitable for separation of the geometric isomers of polar and nonpolar compounds.     

甲烷氧化偶联催化反应的特征

应用程序升温反应（ＴＰＲ）及质谱分析表征了ＣａＯ，Ｓｍ２Ｏ３，０．５－１０％Ｓｍ／ＣａＯ催化剂上的甲烷氧化偶联反应特性。谱图分析表明，在４００－１０００℃范围内，甲烷氧化偶联反应产物的变化呈现三个反应温度区域：（１）完全氧化区，反应主要为ＣＨ３·在催化剂表面完全氧化形成ＣＯｘ和Ｈ２：（２）偶联区，主要为ＣＨ３·的氧化和偶联竞争反应，Ｈ２谱线出现明显的低温峰；（３）氧耗尽区，反应为高温气相反应，产物     

GaPO4 high temperature crystal microbalance demonstration up to 720°C

Quartz-homeotypic gallium (ortho-) phosphate, GaPO₄, is of special interest for resonator applications asking for temperature compensated cuts with higher electro-mechanical coupling than quartz and operational temperatures up to 970°C. The crystal microbalance technique, well known for quartz (QCM) which can be used only at moderate temperatures, can now be extended to much higher temperatures using GaPO₄ crystals, benefiting from all three advantages mentioned above. Two different experiments were done to demonstrate the advantages of a crystal microbalance based on GaPO₄. First, the GaPO₄ resonator was used for film thickness determination and compared with a commercial QCM. This experiment demonstrated that the measuring range can be extended by using GaPO₄ resonators instead of quartz. The second experiment demonstrates the possibility for thermogravimetric analysis up to 720°C by using a new concept for resonator mounting.This revised version was published online in November 2005 with corrections to the Cover Date.     

高电导率的a—SiHY合金的低温电导特性

用射央求地在硅单晶衬底上沉积出电导率高达６０Ｓ／ｃｍ的ａ－ＳｉＨＹ合金薄膜。在２０－３００Ｋ，对于钇含量高的样品，其电导仍是热激活的。ｌｇσ与１／Ｔ的关系曲线能够被拟合成斜率不同的两条直线，直线的斜率和两直线间拐点所地 温度依赖于膜中钇的含量。但对钇含量低的薄膜，电导对温度的依赖关系度为σ∝ｅｘｐ（－１／Ｔ＾１／４）。结果表明，这些钇含量不同的样品在没的温度范围内具有不同的导电机制。     

Wärmekapazitätsmessungen Nach Scanning-Methoden Bis Zu Hohen Temperaturen

Scanning calorimetric methods permit determination of heat capacities at high temperatures up to 1600°C. For disk systems with power compensation application limits are in order of 700°C, and for cylindrical systems with electrical calibration up to 1000°C. For the high temperature range above 1000°C DSC plates and a cylindrical calorimetric systems based on the CALVET principle ('MULTI HTC’) are known. For cylindrical calorimetric systems the precision of the Cp data is between 2 and 5% even at high temperatures without any requirements on the kind and shape of samples. These results are better than data provided by DSC plate systems. This revised version was published online in July 2006 with corrections to the Cover Date.