THE HIGH-PRESSURE CRYSTALLIZATION AND ANNEALING BEHAVIORS OF POLYETHYLENE TEREPHTHALATE OLIGOMER

Polyethylene terephthalate (PET) oligomer samples crystallized and annealed at high pressure were investigated with differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The results showed that better crystals were obtained through high-pressure crystallization from the melt than annealing under the same conditions. The difference of the effects of crystallization and annealing on the morphology of crystals reduced with the increase of crystallization time. The melting temperature was determined by the lamellar thickness when it was shorter than the length of the molecular chains, while the main factor governing the melting temperature changed from lamellar thickness to density of chain-end defects when the lamellar thickness was much longer than the molecular length. PET oligomer extended-chain crystals with thickness up 100 μm were obtained.     

Intermediate Formation of Macrocycles for Efficient Crystallization of 2D Covalent Organic Frameworks with Enhanced Photocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) have gained significant attention as key photocatalysts for efficient solar light conversion into hydrogen production. Unfortunately, the harsh synthetic conditions and intricate growth process required to obtain highly crystalline COFs greatly hinder their practical application. Herein, we report a simple strategy for the efficient crystallization of 2D COFs based on the intermediate formation of hexagonal macrocycles. Mechanistic investigation suggests that the use of 2,4,6-triformyl resorcinol (TFR) as the asymmetrical aldehyde build block allows the equilibration between irreversible enol-to-keto tautomerization and dynamic imine bonds to produce the hexagonal β-ketoenamine-linked macrocycles, the formation of which could provide COFs with high crystallinity in half hour. We show that COF-935 with 3 wt % Pt as cocatalyst exhibit a high hydrogen evolution rate of 67.55 mmol g⁻¹ h⁻¹ for water splitting when exposed to visible light. More importantly, COF-935 exhibits an average hydrogen evolution rate of 19.80 mmol g⁻¹ h⁻¹ even at a low loading of only 0.1 wt % Pt, which is a significant breakthrough in this field. This strategy would provide valuable insights into the design of highly crystalline COFs as efficient organic semiconductor photocatalysts.     

Crystallization kinetics and morphology of biodegradable poly(lactic acid) with a hydrazide nucleating agent

The effect of tetramethylenedicarboxylic dibenzoylhydrazide (designated here as TMC) on the nonisothermal and isothermal crystallization behavior of PLA was investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide angle X-ray diffraction (WAXD). TMC shows excellent nucleating effect on PLA. With the addition of 0.05 wt% TMC, the crystallization half-time of PLA decreases from 26.06 to 6.13 min at 130 °C. The isothermal crystallization data were further analyzed by the Avrami model. The values of the Avrami exponent of the blends are comparable to that of neat PLA, indicating that the presence of TMC does not change the crystallization mechanism of the matrix. The observation from POM and WAXD measurements showed that the presence of TMC increases significantly the nuclei density of PLA but has no discernible effect on its crystalline structure.     

SAPO-11分子筛晶化过程研究

采用X射线衍射、X射线荧光光谱、扫描电镜和固体核磁等方法研究了SAPO-11分子筛的水热晶化过程.结果表明,晶化初期,SAPO-11和一种具有磷硅铝组成的未知晶相同时生成;随着晶化的进行,中间相溶解,SAPO-11的生成速率大大增加,呈现快速晶化的特征;至2.33h后,SAPO-11的结晶度接近100%,并保持至晶化结束.硅从晶化初期即参与了SAPO-11的形成,它在晶体中的含量随晶化时间的延长而逐渐增加.硅原子主要以硅岛的形式分布于SAPO-11分子筛骨架中,从而导致多种硅配位环境的存在.分析显示,SAPO-11分子筛呈现外表面富硅的特点,结合晶化过程的分析可推测,硅在SAPO-11分子筛晶体中的分布不均匀,其含量从内向外递增.     

SAPO-5分子筛的可控合成及晶化过程探索

在非醋酸体系下分别通过动态和静态水热晶化方法合成了SAPO-5分子筛,并考察了转速、晶化时间及凝胶体系水硅比对SAPO-5分子筛晶相及形貌的影响,采用X射线衍射(XRD)和扫描电子显微镜(SEM)技术研究了静态、动态水热条件下SAPO-5分子筛的晶化过程.结果表明,静态水热条件下晶化6 h得到的SAPO-5分子筛为球状、六边形柱状聚集晶体;而在20 r/min转速下晶化2和6 h得到的SAPO-5分子筛分别为分散的凹面柱状晶体(凹面直径约6～8μm)及均一分散的球状晶体(直径为16μm);在60 r/min转速下晶化3 h即可得到高度分散的六边形柱状晶体(六边形直径约5～8μm);提高转速至100和140 r/min时仅需晶化1 h即可得到六边形柱状晶体.通过考察体系水硅比(H₂O/Si摩尔比)的影响,确定最佳的水硅比为70,此条件下所得晶相为纯相且分子筛的分散度最好.综上可知,相较于静态晶化,动态晶化不仅从形貌上改善了晶体的分散度,通过缩短晶化时间、降低晶化转速也提高了SAPO-5分子筛的晶化效率.本文采用较小的水硅比(H₂O/Si摩尔比为...     

钛硅分子筛TS-1合成晶化气氛的影响

考察了不同晶化气氛(N2、H2、A ir、O2)对合成钛硅分子筛TS-1的影响,用XRD、IR和N2吸附/脱附对所合成的钛硅分子筛进行结构表征,发现在H2气氛下合成的TS-1结晶度最高,锐钛矿的含量最少;O2气氛下合成的TS-1中锐钛矿含量最高.以氯丙烯氧化为模型反应,考察了不同晶化气氛下合成的钛硅分子筛的催化活性和双氧水的利用效率.结果表明,在H2气氛下所合成的钛硅分子筛的双氧水的利用效率最高.     

Features of crystallization behavior of natural rubber/halloysite nanotubes composites using synchrotron wide-angle X-ray scattering

The correlation between the mechanical strength and the crystallization behavior of natural rubber (NR)/halloysite nanotubes (HNT) composites is discussed. The tensile strength of NR is improved with the addition of HNT. This improvement is attributed to the unique structure of HNT, which facilitates good dispersion and strong interfacial interaction. HNT also play an important role in assisting the strain-induced crystallization of NR. Crystallization under strain is observed using synchrotron wide-angle X-ray scattering. The stress–strain curves and the corresponding degree of crystallinity after straining provide further evidence. Based on these analyses, a mechanistic model for strain-induced crystallization and the evolution of the orientation of the network structure is proposed.     

An evaluation of thermodynamic models for the prediction of drug and drug-like molecule solubility in organic solvents

Prediction of solubility of active pharmaceutical ingredients (API) in different solvents is one of the main issue for crystallization process design. Experimental determination is not always possible because of the small amount of product available in the early stages of a drug development. Thus, one interesting perspective is the use of thermodynamic models, which are usually employed for predicting the activity coefficients in case of Vapour-Liquid equilibria or Liquid-Liquid equilibria (VLE or LLE). The choice of the best thermodynamic model for Solid-Liquid equilibria (SLE) is not an easy task as most of them are not meant particularly for this. In this paper, several models are tested for the solubility prediction of five drugs or drug-like molecules: Ibuprofen, Acetaminophen, Benzoic acid, Salicylic acid and 4-aminobenzoic acid, and another molecule, anthracene, a rather simple molecule. The performance of predictive (UNIFAC, UNIFAC mod., COSMO-SAC) and semi-predictive (NRTL-SAC) models are compared and discussed according to the functional groups of the molecules and the selected solvents. Moreover, the model errors caused by solid state property uncertainties are taken into account. These errors are indeed not negligible when accurate quantitative predictions want to be performed. It was found that UNIFAC models give the best results and could be an useful method for rapid solubility estimations of an API in various solvents. This model achieves the order of magnitude of the experimental solubility and can predict in which solvents the drug will be very soluble, soluble or not soluble. In addition, predictions obtained with NRTL-SAC model are also in good agreement with the experiments, but in that case the relevance of the results is strongly dependent on the model parameters regressed from solubility data in single and mixed solvents. However, this is a very interesting model for quick estimations like UNIFAC models. Finally, COSMO-SAC needs more developments to increase its accuracy especially when hydrogen bonding is involved. In that case, the predicted solubility is always overestimated from two to three orders of magnitude. Considering the use of the most accurate equilibrium equation involving the ΔC_p term, no benefits were found for drug predictions as the models are still too inaccurate. However, in function of the molecules and their solid thermodynamic properties, the ΔC_p term can be neglected and will not have a great impact on the results.     

Analysis of excimer laser annealing of amorphous SiGe on La2O3//Si structures

The reduction of complementary metal oxide semiconductor dimensions through transistor scaling is in part limited by the SiO₂ dielectric layer thickness. Among the materials evaluated as alternative gate dielectrics one of the leading candidate is La₂O₃ due to its high permittivity and thermodynamic stability. However, during device processing, thermal annealing can promote deleterious interactions between the silicon substrate and the high-k dielectric degrading the desired oxide insulating properties.The possibility to grow poly-SiGe on top of La₂O₃//Si by laser assisted techniques therefore seems to be very attractive. Low thermal budget techniques such as pulsed laser deposition and crystallization can be a good choice to reduce possible interface modifications due to their localized and limited thermal effect.In this work the laser annealing by ArF excimer laser irradiation of amorphous SiGe grown on La₂O₃//Si has been analysed theoretically by a numerical model based on the heat conduction differential equation with the aim to control possible modifications at the La₂O₃//Si interface. Simulations have been carried out using different laser energy densities (0.26-0.58 J/cm²), different La₂O₃ film thickness (5-20 nm) and a 50 nm, 30 nm thick amorphous SiGe layer. The temperature distributions have been studied in both the two films and substrate, the melting depth and interfaces temperature have been evaluated. The fluences ranges for which the interfaces start to melt have been calculated for the different configurations.Thermal profiles and interfaces melting point have shown to be sensitive to the thickness of the La₂O₃ film, the thicker the film the lower the temperature at Si interface.Good agreement between theoretical and preliminary experimental data has been found.According to our results the oxide degradation is not expected during the laser crystallization of amorphous Si_0.7Ge_0.3 for the examined ranges of film thickness and fluences.     

尼龙1010非等温结晶动力学与机理研究

尼龙１０１０非等温结晶动力学与机理研究朱诚身，王经武，李卓美（郑州大学材料工程系郑州４５００５２）（中山大学高分子研究所广州５１０２７５）关键词尼龙１０１０，非等温结晶动力学，结晶机理，动力学结晶能力尼龙１０１０的结晶动力学，无论是等温还是非等温，研...