聚碳酸亚丙酯对聚(β-羟基丁酸酯-β-羟基戊酸酯)结晶行为的影响

用FTIR和DSC研究了PHBV及其与聚碳酸亚丙酯(PPC)熔融共混样的熔融结晶行为和等温结晶动力学.结果表明,PHBV与PPC熔融共混过程中发生了酯交换反应,两组分间存在一定的相互作用.PPC虽然能降低PHBV结晶折迭链的表面自由能,但同时也能够降低PHBV的结晶度、球晶径向生长速率、平衡熔点和结晶能力.     

非等温条件下聚合物结晶动力学模型研究进展

介绍了在非等温条件下聚合物结晶动力学模型的研究进展 ,给出了在非等温静态条件下和剪切诱导条件下结晶的几个重要的动力学模型 ,并进行了比较和讨论     

环己烷催化氧化制取顺酐和醋酸的催化剂研究

为研究气态环己烷催化氧化制取顺酐及醋酸的新反应，采取不同的方法制备了系列固体VPO催化剂.借助XRD、FT-IR对催化剂进行了主体晶相确定，用氧化还原滴定方法测定了不同晶相催化剂中钒的平均氧化数.结合催化反应的活性评价，发现催化剂主体晶相、结晶度、活化气氛和催化剂的V4＋/V5＋比均对目标反应的催化活性产生影响，5种催化剂中以(VO)2P2O7晶相催化剂的活性为最高.     

Influence of clay surface modification with urethane groups on the crystallization behavior of in situ polymerized poly(butylene succinate) nanocomposites

The crystallization behavior and fine structure of poly(butylene succinate) (PBS) nanocomposites with intercalation (30B20) and exfoliation (30BM20) morphologies, respectively, were investigated via isothermal crystallization testing and synchrotron small-angle X-ray scattering (SAXS). The dynamic viscosity of 30BM20 was markedly increased due to favorable interactions between the PBS matrix and the urethane group on the clay surface. However, 30BM20 showed similar crystallization rates to that of homo PBS because the surface urethane modification for 30BM20 precluded PBS matrix from the metallic group into clay to difficult in contact with each other, resulting in a reduced nucleation activity for the metallic group. SAXS profiles revealed that the long period and amorphous region size for 30B20 drastically decreased during isothermal crystallization. Meanwhile, 30BM20 was similar to those of homo PBS. This result also supports the above explanation for isothermal crystallization behavior. Considering all results in total, the introduction of a urethane modification considerably enhanced the physical properties of PBS but caused delayed crystallization rates.     

Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films

Transparent biaxial oriented poly(lactic acid) (BOPLA) films with improved dimensional stability were successfully prepared by controlling the crystallization of poly(lactic acid) (PLA). The crystalline morphology of PLA films can be manipulated by changing certain processing parameters, such as stretch ratio, heat setting temperatures, and heat setting time. Optical and mechanical properties as well as dimensional stability of the resulting polymer films are governed by their crystallinity and crystalline morphology. Crystallization behavior and kinetics of PLA, therefore, were investigated using wide angle X-ray diffraction (WAXD), small angle X-ray scattering (SAXS), and differential scanning calorimetry (DSC) techniques. Mechanical properties and the dimensional stability of the biaxial oriented PLA films were obtained and correlated with their processing conditions. Poly(lactic acid) films prepared by melt extrusion methods have great potential for food packaging, shrink labeling and protective film applications. However, shrinkage at elevated processing temperature should be minimized to avoid puckering of the polymer film. Shrinkage of less than 2% was achieved for a BOPLA film stretched 300% in both directions at 75 °C and then annealed at 160 °C for 30 s. Fabrication, properties, and potential applications of a series of biodegradable films will be described.     

Novel poly(butylene succinate-co-lactic acid) copolyesters: Synthesis, crystallization, and enzymatic degradation

A series of aliphatic biodegradable poly(butylene succinate-co-dl-lactide) (PBSLA) copolyesters were synthesized with the aim of improving the degradation rate of poly(butylene succinate) (PBS) by incorporation of dl-oligo(lactic acid) (OLA) into the PBS molecular chains. The composition and sequential structure of the aliphatic copolyesters were investigated by proton nuclear magnetic resonance (¹H NMR) spectroscopy. The crystallization behaviors, the crystal structure and morphology of the copolyesters were investigated by using differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and polarizing optical microscopy (POM), respectively. The results indicate that the crystallization of the copolyesters was restricted by the incorporation of lactide (LA) units, which further tuned the mechanical properties of the copolyesters. The copolyesters could form complete spherulites and exhibit the same crystal structure as that of PBS. Enzymatic study indicated that the copolyesters with higher content of LA units degraded faster, and the degradation began in the amorphous regions and then in the crystalline regions. The morphology and the resulting degradation products of the copolyesters were investigated by scanning electron microscopy (SEM) and ¹H NMR analysis during the degradation process.     

贵金属Au冷却过程中结构及能量变化的分子动力学计算机模拟

通过分子动力学方法,研究了不同冷速下贵金属Au在温度2000～300K的冷却过程中微观结构的变化特点。结果发现,冷却速度对Au的微观结构产生重要影响。采用偶关联函数和键对分析技术对原子局域团簇结构进行分析,并考察了冷却过程中原子势能随温度的变化,比较了Au的微观结构转变与能量变化的对应关系,从能量转化的角度对冷却过程中Au的结构变化进行了说明。     

The Crystallization of Poly (3-dodecyltbiophene) in an Oriented Solidification Environment

Poly (3-alkylthiophenes) (P3ATs) have made up of a family of conductive polymerswhich are soluble, fusible and processable, since the introduction of flexible alkyl sidechains"'. It is generally accepted that P3ATs can form similar layered structures. inwhich the thiophene rings possess planarity and the side chains act as spacers'-'. Whenthe number. of 'carbon atoms of alkyl side chains is more than 10, some orderlyarrangements will occur for side chains betWeen the' layers'. It has been w…     

盐卤硼酸盐化学(非汉字字符)——MgO·nB_2O_3-18%MgCl_2-H_2O过饱和溶液20℃结晶动力学

用结晶动力学方法对不同摩尔比的 Mg O/B2 O3在摩尔分数为 1 8% Mg Cl2 -H2 O中的过饱和溶液在2 0℃的结晶动力学过程进行了研究 .n(Mg O) /n(B2 O3) =1 /1和 1 /1 .5时分别结晶析出 2 Mg O· 2 B2 O3·Mg Cl2 · 1 4H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) .n(Mg O) /n(B2 O3) =1 /2时依次结晶析出 Mg O·3 B2 O3· 7.5 H2 O,Mg O· 2 B2 O3· 9H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) 3种固相 .n(Mg O) /n(B2 O3)=1 /3时结晶析出不同结晶水的六硼酸镁 Mg O· 3 B2 O3· 7H2 O和 Mg O· 3 B2 O3· 7.5 H2 O.析出固相采用X射线粉末衍射、红外光谱和热分析进行物相鉴定 .拟合并给出结晶动力学方程 ,同时对水合镁硼酸盐的结晶反应机理进行了探讨     

Effects of Heat Treatment on the Crystallization Behavior of Poly(3-alkylthiophenes)

IntroductionPoly( 3- alkylthiophenes) ( P3ATs) ,as a newkind of soluble,fusible and processable conductivepolymers,have attracted a great interest and muchattention ofchemistsand physicists[1,2 ] . Ithas beenwidely accepted that P3ATs can form similarlayered structures with alkyl side chains beingoriented in the lateral a- axis direction[3— 6] .Moreover,when the number of the carbon atoms inthe alkyl side chains is more than1 0 ,some orderlyarrangements of the side chains will occur between…