Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.     

Asymptotic behavior of non-autonomous Lamé systems with subcritical and critical mixed nonlinearities

This paper deals with the asymptotic behavior of solutions to a class of non-autonomous Lamé systems modeling the physical phenomenon of isotropic elasticity. The main feature of this model is that the nonlinearity can be decomposed into a subcritical part and a critical one. We first show that the system generates a non-autonomous dynamical system, and then prove that the system has a minimal universe pullback attractor. The upper-semicontinuity of these pullback attractors is also established as the perturbation parameter of the external force tends to zero. The quasi-stability ideas developed by Chueshov and Lasiecka (2010, 2008, 2015) are used to prove the pullback asymptotic compactness of the solutions in order to overcome the difficulty caused by the critical growthness of the nonlinearity.     

An Arithmetic Reduction of Finite Rank 3 Geometries with Linear Spaces as Plane Residues and with Dual Linear Spaces as Point Residues

Let be a rank three incidence geometry of points, lines and planes whose planes are linear spaces and whose point residues are dual linear spaces (notice that we do not require anything on the line residues). We assume that the residual linear spaces of belong to a natural class of finite linear spaces, namely those linear spaces whose full automorphism group acts flag-transitively and whose orders are polynomial functions of some prime number. This class consists of six families of linear spaces. In the amalgamation of two such linear spaces imposes an equality on their orders leading, in particular, to a series of diophantine equations, the solutions of which provide a reduction theorem on the possible amalgams of linear spaces that can occur in .We prove that one of the following holds (up to a permutation of the words point and plane):A) the planes of and the dual of the point residues belong to the same family and have the same orders,B) the diagram of is in one of six families,C) the diagram of belongs to a list of seven sporadic cases.Finally, we consider the particular case where the line residues of are generalized digons.     

Intermolecular contact interactions and their temperature dependence

A model, based on inverse gas chromatography experiments, has been developed for intermolecular interaction and its temperature dependence. The model ascribes to each substance a four-component solubility parameter; the four components reflect the van der Waals, polar, electron donor, and electron acceptor interactive properties. Their values depend on temperature in the same manner as does the cohesive energy. The latter was found to depend only on the critical temperature, the acentric factor, and the reduced temperature. The model was used for evaluation of the solubility parameters from polymer-solvent interaction coefficients and their temperature dependence with high accuracy. For binary solventsolvent mixtures, the free energy of mixing and its temperature dependence, as well as enthalpy of mixing can be derived from this model with a good accuracy.     

Volumetric studies and thermodynamics of viscous flow of hydroxamic acids in acetone + water solvent at temperatures 303.15 and 313.15 K

Densities ρ and viscosities η of two hydroxamic acids, N-phenyl-2-chlorobenzo- and N-o-tolyl-4-chlorobenzo-, have been determined as a function of their concentration in aqueous acetone solution at temperatures 303.15 and 313.15 K. Apparent molar volumes, standard-state partial molar volumes and relative viscosities have been calculated. The viscosity data have been analyzed using Jones-Dole equation. The activation thermodynamic parameters of viscous flow have been evaluated using Feakins equation. These were obtained to throw light on the mechanism of viscous flow. Thermodynamic interactions in solutions have been studied in terms of a number of excess functions calculated from the experimental data. The effect of hydroxamic acid concentration and temperature on these parameters has been discussed. The results were interpreted in the light of solute-solvent interactions in aquo-organic media.     

Modifying the thermosensitivity of copolymers of sodium styrene sulfonate and<Emphasis Type="Italic"> N</Emphasis>-isopropylacrylamide with dodecyltrimethylammonium chloride

The interactions between copolymers of sodium styrene sulfonate (SSS) and N-isopropylacrylamide (NIPAM), anionic polyelectrolytes, and dodecyltrimethylammonium chloride (DTAC), a cationic surfactant, were studied in aqueous solutions of various ionic strengths. The copolymers were found to be thermoresponsive, showing a lower critical solution temperature (LCST). The influence of the polymer composition, the surfactant concentration, and the ionic strength on the LCST was studied. The surfactant was found to interact strongly with the polymer, forming mixed polymer-surfactant micelles. The critical aggregation concentration (cac) of the polymer-surfactant system was found from fluorescence spectroscopy using pyrene as a fluorescent probe. A strong dependence of the anionic polyelectrolyte-cationic surfactant interactions on the structure of the ionic comonomer was observed.     

稀土元素在钢中的热力学参数及应用

综合报道了通过采用几种不同的高温金属溶液实验方法，研究所得到的稀土元素在金属溶液冶炼温度范围内分别与硫、氧、氧 硫、碳、氮、低熔点铜、磷、钛、铌、钒等重要元素相互作用规律及有关的一系列热力学参数和温度函数式，并简要地讨论了这些热力学参数在含稀土钢中的应用。     

Evaluation of the limit of performance of an analytical method based on a statistical calculation of its critical concentrations according to ISO standard 11843: Application to routine control of banned veterinary drug residues in food according to European Decision 657/2002/EC

Traceability of the measurement of analytical parameters capable of evaluating the performance of methods is an important concept for the assessment of quality for the routine control, especially for residue monitoring of non-authorized medicinal substances in food from animal origin. The European Decision no. 657/2002/EC recommends to calculate two statistical limits, CCα and CCβ, which allow to evaluate the critical concentrations above which the method reliably distinguish and quantify a substance taking into account the variability of the method and the statistical risk to take a wrong decision. The calculation, which can be derived from the ISO standard no. 11843 is applied on a routine basis. An example displays a very simple way for evaluating the performance of an LC-MSMS method which has been validated a few years ago and is qualified onto a Micromass Quattro LCZ tandem mass spectrometer to monitor and confirm the nitrofuran metabolite residues in food from animal origin. Community Reference Laboratory for Antimicrobial Veterinary Drug Residue Control in Food from Animal Origin     

将A-L理论推广到无限维李代数

为使由Alhassid与Levine所提出的动力学李代数方法（简称A－L理论）能适用于更多的散射体系，在h(∞)中引入了有效集合C（有限维）的概念．按照微扰理论的意义，C中的代数元所对应的群参量是较低次微扰的结果，而不属于C的代数元所对应的群参量则相当于较高次做扰所产生的修正结果．因此可以近似地利用C来代替h(∞)．这样，不仅简化了计算程序并且对于很多具有现实意义的散射过程的计算成为可能．