Relation between Electric Spark Sensitivity and Impact Sensitivity of Nitroaromatic Energetic Compounds

Impact and electric spark sensitivities of energetic compounds are two important sensitivity parameters, which are closely related to many accidents in working places. In contrast to electric spark sensitivity, impact sensitivity can be easily measured. A new simple method is introduced to correlate electric spark and impact sensitivities of nitroaromatic compounds. Two correcting functions are used to consider several molecular moieties for reliable prediction of electric spark sensitivity through the measured or estimated impact sensitivity of nitroaromatics. The model is optimized using a set of 28 CHNO polynitroaromatic explosives and then it is tested for some nitroaromatics containing the other atoms such as sulfur. The predicted electric sensitivities of the new method are also compared with the reported results of a new quantum mechanical approach. For 22 CHNO nitroaromatics, quantum mechanical calculations are within ±3.0 J of 18 measured values and more than ±3.0 J for remaining 4 experimental data. Meanwhile, the predicted results of the method are less than ±3.0 J for 28 CHNO nitroaromatics. The root‐mean‐square (rms) deviations of the new model and quantum mechanical are also 1.55 and 2.51 J, respectively.     

Determination of volumetric shrinkage of thermally cured thermosets using video-imaging

Video-imaging is one method of analyzing the shrinkage of resins. For the measurement, a drop of resin is placed near an illumination source and its contour is imaged from the front with a camera. This paper presents a further development, detailed investigation and verification of this technique to analyze the chemical shrinkage of thermally cured epoxy resins during cure. A new cylindrical sample holder was developed which enables the automated detection of the baseline, as well as defining the scale within the pictures. In a test series, the resin's volume was varied, as well as its contour. The findings confirm that the measured volume shrinkage is independent of the drop shape.Finally, the obtained shrinkage results were verified and evaluated in comparison with values measured by a mercury dilatometer and a rheometer. The shrinkage results of the investigated new method are in good accordance with the more established methods.     

Systematic approach to optimize a pretreatment method for ultrasensitive liquid chromatography with tandem mass spectrometry analysis of multiple target compounds in biological samples

In current approaches for new drug development, highly sensitive and robust analytical methods for the determination of test compounds in biological samples are essential. These analytical methods should be optimized for every target compound. However, for biological samples that contain multiple compounds as new drug candidates obtained by cassette dosing tests, it would be preferable to develop a single method that allows the determination of all compounds at once. This study aims to establish a systematic approach that enables a selection of the most appropriate pretreatment method for multiple target compounds without the use of their chemical information. We investigated the retention times of 27 known compounds under different mobile phase conditions and determined the required pretreatment of human plasma samples using several solid‐phase and liquid–liquid extractions. From the relationship between retention time and recovery in a principal component analysis, appropriate pretreatments were categorized into several types. Based on the category, we have optimized a pretreatment method for the identification of three calcium channel blockers in human plasma. Plasma concentrations of these drugs in a cassette‐dose clinical study at microdose level were successfully determined with a lower limit of quantitation of 0.2 pg/mL for diltiazem, 1 pg/mL for nicardipine, and 2 pg/mL for nifedipine.     

A New Method for Predicting Decomposition Temperature of Imidazolium‐based Energetic Ionic Liquids

Two novel correlations are introduced to predict decomposition temperatures of imidazolium‐based energetic ionic liquids. The first simple model is based only on the number of some of atoms in cationic and anionic structures. Meanwhile, a suitable correction term was added in the second correlation to adjust the predicted results for the presence of some specific cation/anion moieties. The measured data of 164 different types of imidazolium‐based energetic ionic liquids were used to derive the new correlations. The calculated mean absolute percent errors (MAPEs) of the first and second models are 6 and 4, respectively. The predicted results have confirmed that insertion of correcting function in the second correlation can provide better estimations. These models were also tested and compared with one of the best available group contribution methods, where group contribution method can be applied, for 17 further imidazolium‐based energetic ionic liquids containing complex molecular structures. Furthermore, the predicted values of MAPEs of the new models are close to that of obtained by group contribution method.     

Synthesis,thermal and optical properties of new nanosized polyamides containing N-phenyl- and O-naphthyl-s-triazine rings; part 2

We report the chemistry and properties of two new series of well-defined nano sized spheres aramides-containing N- and O-naphthyl-s-triazines. The polymers were carefully characterized by different techniques including infrared, ultraviolet, fluorescent emission, elemental, thermal analyses and scanning electron microscopy (SEM). The polymers were readily soluble in polar aprotic solvents while insoluble neither in water nor halogenated solvents. Thermal analyses data up to 900°C showed high thermal behavior and the polymers were classified either as “slow burning polymers” or “self-extinguishing polymers” based on their calculated the limiting oxygen index. Interestingly, the naphthyl / phenyl interchange has dramatic improvement on the thermal properties. Obviously, the pyridine / phenylene interchange has no influence on the thermal properties of the addressed polymers. Thermal stability of the aniline-containing polymers proved to be comparable to their naphthylamine analogues. Polymers containing p-phenylene moieties exhibited better thermal results compared to their analogues containing m-phenylene moieties. Benzidine containing polymers and sulfone containing polymers exhibited better thermal stabilities than their analogues containing either ether or methylene flexible linkages. The kinetic data obtained from the nonisothermal decomposition of the prepared polyamides series were also studied. The polymers exhibited emissions ranging from blue to orange wavelength depending on the nature of the signaling unit. The naphthyl / phenyl interchange led to either appreciable red-shifted absorptions in some cases or blue-shifted absorptions in other cases and this behavior may be attributed to the contorted, twisted structural nature of the naphthalene ring. Such attracting properties make these polymers good candidates for applications such as processable high-temperature materials and also as heat-resistant polymeric materials.     

Yet on statistical properties of traded volume: Correlation and mutual information at different value magnitudes

In this article we analyse linear correlation and non-linear dependence of traded volume, v, of the 30 constituents of Dow Jones Industrial Average at different value scales. Specifically, we have raised v to some real value α or β, which introduces a bias for small or large values. Our results show that small values of v are regularly anti-correlated with values at other scales of traded volume. This is consistent with the high liquidity of the 30 equities analysed and the asymmetric form of the multi-fractal spectrum for traded volume which has supported the dynamical scenario presented by us.     

Validation of a new planar chromatographic method for quantification of the heterocyclic aromatic amines most frequently found in meat

A new HPTLC method, in which all the HPTLC steps are performed automatically, has been established for quantification of the five most frequently found heterocyclic aromatic amines (HAA: PhIP, MeIQx, 4,8-DiMeIQx, norharmane, and harmane). The method was used for trace analysis (low μg kg⁻¹ range) of HAA in meat samples and found to be a cost-effective alternative to HPLC, because it enables simultaneous chromatography of up to 20 samples within 30 min. After preconditioning of the HPTLC silica gel layer with ammonia vapour the plate was developed with methanol–chloroform, 1:9 (v/v). At least 4ó separations were obtained and selectivity for the meat matrix was achieved. In repeatability tests relative standard deviations (RSD, n = 14, peak height) were less than or equal to ±3.3%. In tests of intermediate precision (mean value for 14 tracks on six different plates on six different days) RSDs were better than ±2% (peak height). Measurement of the reproducibility of migration distances on six different plates resulted in RSDs less than or equal to ±1.3%. Limits of detection and quantification (S/N 3 and 10, respectively) for the five HAA ranged between 0.4 and 5 ng per band and between 0.8 and 14 ng per band, respectively. With paraffin–n-hexane, 3:7 (v/v), as fluorescence enhancer more sensitive determinations (up to 8.5-fold greater signal intensities) were achieved for PhIP, norharmane, and harmane. In the working range (1:10) polynomial regressions for PhIP, MeIQx, and 4,8-DiMeIQx and linear regressions for norharmane and harmane resulted in RSDs between ±1.9 and 3.6%. To confirm the absence of potentially coeluting minor HAA, rarely formed in meat, mass spectra were occasionally recorded by online ESI–MS. Robustness tests showed that preconditioning with ammonia was essential for successful separation and that relative humidity had only a minor effect on the chromatography. Analysis of HAA in a meat sample by HPTLC/UV-FLD and confirmation of MelQx by MS     

Fluorescence Lifetime Correlation Spectroscopy

This article explains the basic principles of FLCS, a genuine fusion of Time-Correlated Single Photon Counting (TCSPC) and Fluorescence Correlation Spectroscopy (FCS), using common terms and minimum mathematics. The usefulness of the method is demonstrated on simple FCS experiments. The method makes possible to separate the autocorrelation function of individual components of a mixture of fluorophores, as well as purging the result from parasitic contributions like scattered light or detector afterpulsing.