嵌段共聚物溶致液晶相中水的2H-NMR动力学分析

采用D₂O 的²H-NMR线型和弛豫分析了PEO-PPO-PEO/D₂O/对二甲苯体系的层状和六角液晶相的动力学行为. 通过实验测得了两个不同体系的自旋 晶格弛豫时间T₁、自旋-自旋弛豫时间T₂和²H-NMR 谱. ²H-NMR 谱均为具有四极劈裂的粉末谱线型，且在谱图的中心，β_LD=54.7°时存在一个倒峰. 倒峰的出现直接表明引起体系中弛豫的主要动力学过程处于极窄化区域. 采用NMR弛豫模型，通过调节动力学参数，使理论模拟的²H-NMR谱、弛豫时间、倒峰的大小与实验的对应量相吻合，求得了体系的动力学参数.     

In situ functionalized self-assembled monolayer surfaces for selective chemical vapor deposition of copper

Recent studies show that the self-assembled monolayer (SAM) is well suited to control the selectivity of chemical vapor deposition (CVD). Here, we reported the selective CVD for copper on the functionalized SAM surfaces (with -SH, -SS-, and -SO₃H terminal groups). The -SS- and -SO₃H terminal group surfaces were obtained through in situ chemical transformation of -SH terminal group surface of a 3-mercaptopropyltrimethoxysilane-SAM (MPTMS-SAM). As a result, the -SS- terminal group surface reduces copper deposition and the -SO₃H terminal group surface enhances copper deposition comparing to the -SH terminal group surface. In addition, the MPTMS-SAM was irradiated by UV-light through a photo mask to prepare SH-group and OH-group regions. Then, copper films were deposited only on the SH-group region of the substrate in chemical vapor deposition. Finally, patterns of copper films were formed in the way of UV-light irradiation. These results are expected for use of selective deposition of copper metallization patterns in IC manufacturing processes.     

ICP-MS测定血中镁、铜、铅浓度时的基体效应单一内标校正方法研究

ICP-MS测定模拟全血基体中不同质量段的Mg, Cu, Pb元素,考察基体效应对测定值的影响,分别采用传统内标法和单一内标CAIS方法(common analyte internal standardization)对其进行校正和比较。结果表明CAIS方法适用于不同浓度血液基体中多种元素的同时校正,且效果良好,其相对平均误差仅为3.05%,明显低于传统内标法的12.39%和校正前的23.91%;CAIS方法不受内标元素和被测元素质量数差异、测定强度差异以及电极电位差异的限制;使用全血和血清标准物质对CAIS方法可靠性进行验证,测定值全部落在标准值范围内。     

Reflection-Absorption Infrared Spectroscopy Study of Polyacrylonitrile on Copper at Elevated Temperature

Reflection-absorption infrared spectroscopy (RAIR) has been used to investigate the chemical structural changes in Polyacrylonitrile (PAN) film adsorbed on copper at 200°C for different time. The formation of an almost fully conjugated C-C=C backbone occurs after heating for only 2 h due to the catalytic effect of copper. The freely dangling cyano groups in PAN molecules initially coordinate to copper surface through the triple bond in π-bonded orientation, then convert to [sgrave]-bonding through the donation of the lone pair of electrons of nitrogen. It is suggested that this transition of the types of coordination would relate to the different geometries of PAN on copper during heating. Since the nitrile complexing and cyclization occur at the same time, the reaction process for the pyrolysis of PAN on copper surface is different from that in the bulk.     

Characterization of Phyllanthus amarus herb by inductively coupled plasma mass spectrometric (ICP-MS) analysis,optical absorption and electron paramagnetic resonance (EPR) spectroscopic methods

A powdered sample of Phyllanthus amarus herb of Kadapa district of Andhra Pradesh, India, is used in the present study. ICP-MS analysis indicates that copper is present in higher concentration when compared to other elements. Although the Pb is toxic, it is within the permissible limit. The evaluated soil and herb physico-chemical parameters indicate that the sample is acidic in nature in comparison with the soil. An EPR study on powdered sample confirms the presence of Fe(III), Mn(II) and Cu(II). Optical absorption spectrum indicates that Fe(III) impurity is present in octahedral structure whereas Cu(II) is present in rhombically distorted octahedral environment. MIR results are due to carbonate fundamentals.     

分散剂对YAG粉末形貌和性能的影响

以硝酸铝［Al(NO3)39H2O］和硝酸钇［Y(NO3)36H2O］为原料,碳酸氢铵［NH4HCO3］为沉淀剂,PEG400,PEG800和PEG1000等为分散剂,采用正向共沉淀法合成了钇铝石榴石（YAG）前驱体粉末。并用X射线衍射仪（XRD）、扫描电子显微镜（SEM）、粒度测试仪等分析了粉末的形貌和性能。结果表明,分散剂的加入,减少了粉末的团聚现象,而且由PEG400,PEG800分散剂制备的先驱体粉末经1200 ℃煅烧60 min后均能形成纯度较高的YAG相,但PEG1000样品粒度更细,比表面积为1748.78 m2/kg,中位径为1.42 m,而前者所得粉末的比表面积分别为29.39和128.60 m2/kg,中位径分别为196.14和20.55 m。     

原子捕集－火焰原子吸收光谱法测定人发中的微量铜

本文详细地考查了原子捕集的测定条件及介质的影响，成功地测定了人发中的微量铜。原子捕集法的灵敏度在捕集时间为１ｍｉｎ时为常规法的８．７倍，加标回收率９４．４％－１００．４％。     

微波消解-FAAS测定飞饿中钙、镁、铁、锌、铜和锰的含量

采用微波消解-FAAS法对一种食用植物飞饿的叶和茎中铁、锌、铜、锰、钙、镁6种微量元素进行分析测定。结果显示飞饿中含有丰富的钙、镁、铁、锌、铜和锰元素。RSD为≤8.1%(n=6),加标回收率为94%—108.5%。     

A multi-scale Monte Carlo study of oxide structures on the Cu(1 0 0) surface

We present a multi-scale Monte Carlo study of the oxidation of the Cu(1 0 0) surface based on the Bortz-Kalos-Lebowitz model with the equilibrium energetics obtained from ab initio calculations. The radial and island size distribution functions are examined and Cu-O structures are analyzed at different temperatures and coverages. We concentrate on the coverages of 0.3 monolayer O or less, with variable sub-monolayer coverages of Cu. The results show that even though the ab initio calculations yield a higher barrier for O than for Cu adatom diffusion on Cu(1 0 0), the stability of Cu structures causes the O adatoms to be more mobile on the Cu(1 0 0) surface than the Cu adatoms. We are able to reproduce the c(2 × 2)-O domains seen in the experiments. However, we give an alternative explanation based on the repulsive interactions of O that, on one hand, cause the local ordering and, on the other hand, prohibits large well-ordered domains. We also give interpretation on the formation of the R45°-O reconstruction of Cu(1 0 0) above the O coverages of 0.3 monolayer based on the ab initio energetics.     

Vibrational Spectrometry Strategies for Quality Control of Procymidone in Pesticide Formulations

Abstract

Two vibrational spectrometry–based methodologies were developed for procymidone determination in wettable powdered pesticide formulations. The Fourier‐transform infrared (FTIR) procedure was based on the selective extraction of procymidone by chloroform and determination by peak area measurement between 1451 and 1441 cm^?1, using a baseline correction established between 1490 and 1410 cm^?1, and a precision of 0.4% and a limit of detection of 0.01% w/w procymidone for a sample mass of 25 mg were obtained. For FT‐Raman determination, the selected conditions were peak area measurement between 1005 and 995 cm^?1 Raman shift, with a baseline correction fixed between 1030 and 947 cm^?1, and a relative standard deviation of 1% and a limit of detection of 0.8% procymidone in the original sample were obtained. The sample frequency for FTIR determination was 30 hr^?1, lower than that for Raman with 40 hr^?1. FT‐Raman reduces to the minimum the reagent consumption and waste generation, also avoiding the sample handling and contact of the operator with the pesticide. It can be concluded that the proposed methods are appropriate for quality control in commercial pesticide formulations.