Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.     

Periodic orbits around the collinear libration points in the restricted three body problem when the smaller primary is a triaxial rigid body and bigger primary is a source of radiation pressure

Periodic orbits belonging to the stromgren families A, B and C around the collinear libration points in the restricted three body problem have been studied when the smaller primary is a triaxial rigid body and more massive body is a source of radiation pressure. These families are determined in three different cases: (i) classical case, (ii) when bigger primary is a source of radiation pressure, (iii) when smaller primary is a triaxial rigid body and bigger primary is a source of radiation pressure. The Liapunov stability of each periodic solution has also been examined.      

大埋深粘土三轴高压卸载变形与强度特征

以取自山东巨野矿区埋深近 4 30～ 6 0 0m的深部粘土样为例 ,分析测试了土的常规物理力学性质参数。考虑该埋深土的天然应力水平及其在煤矿建井开挖中的卸载应力变化 ,在三轴伺服仪上 ,进行三向等压分别达 11MPa、12MPa、14MPa下的卸除围压、保持轴压的三轴高压卸载试验 ,分析了深部粘土三轴高压卸载变形和强度特点 ,得到了相关力学参数。成果丰富了土的高压卸载力学性研究 ,并为巨野矿区煤矿立井建设提供了工程地质基础参数     

Properties of the πh_(9/2)  νi_(13/2) band in odd-odd ~(188)Au

A new rotational band has been identified and assigned to 188Au for the first time using the 173Yb(19F,4nγ) reaction at the beam energies of 86 and 90 MeV. This band is proposed to be built on the πh9/2  νi13/2 configuration by comparing the band properties with known bands in neighboring nuclei. The prolate-to-oblate shape transition through triaxial shape has been proposed to occur around 188Au for the πh9/2  νi13/2 bands in odd-odd Au isotopes on the basis of total Routhian surface (TRS) calculations.     

Properties of the 3/2~-[521] band in the odd-N rare-earth nuclei

High-spin states in 161Er have been studied experimentally via the 150Nd(16O, 5n) reaction at a beam energy of 86 MeV. Three rotational bands built on the 5/2+[642], 3/2-[521], and 11/2-[505] configurations have been extended up to high-spin states, and particularly, the α = -1/2 branch of the ground state 3/2-[521] band has been revised significantly. It is found that signature inversion occurs in the 3/2-[521] band after the band crossing in 161Er. The systematics of the signature inversion associated wit...     

三轴稳像棱镜组的三种运动方式

三轴稳像棱镜组是具有三自由度全视场稳定作用,同时还可起扫描、正像作用的多功能棱镜组。本文对该棱镜组的三种运动方式进行了讨论,并运用反射棱镜的基本稳像原理,推导出了三种运动方式的稳像公式和稳像工作公式。     

基于三维Hopkinson杆的混凝土动态力学性能研究

混凝土、岩石类材料在复杂应力状态下的动态力学性能研究一直备受关注,但鉴于动态实验的复杂性,对真三轴应力状态下材料的动态加载一直未曾实现。本文中研制了一套真三轴静载作用下混凝土、岩石类材料的“三维Hopkinson杆”动态力学实验系统,为冲击载荷作用下材料动态各向异性特性的研究提供了一种有效的实验测试技术。该系统采用液压伺服控制对立方体试件施加三向独立的0~100 MPa真三轴静载,再利用分离式Hopkinson压杆对试件施加冲击动载,具体研究了C30混凝土材料在不同真三轴静载条件下的动态压缩性能,得到了不同条件下X、Y、Z方向上的动态应力应变关系。     

含能材料三轴动态压缩实验的一个计算机模拟方法

在含能材料单轴、受限三轴动态压缩实验的基础上，提出一种将计算机数值模拟和实验数据相结合，估算实验系统中钢筒与试件间的库伦摩擦力，从而正确确定含能材料的动态三轴力学性能（弹性模量Ｅ，泊桑比ν，屈服限Ｙ等）的方法。本方法用于ＴＮＴ炸药受限三轴动态压缩实验，通过建立钢筒－试件的库伦摩擦有限元模型，采用ＡＤＩＮＡ通用程序进行动力分析，估算了摩擦力对实验数据的影响，获得了考虑摩擦力修正后的ＴＮＴ三轴动态压缩响应，为含能材料三轴动态力学性能的确定提供了一种有效的方法。     

三轴速调管放大器自激振荡诊断

为满足X波段三轴速调管放大器（TKA）各腔内部自激振荡的诊断需求,设计了一种结构简单紧凑、无需外部密封结构的新型波导耦合器。利用小孔耦合原理和CST仿真软件,针对TKA中常见的自激振荡TE61模式,对该耦合器的耦合特性进行了理论分析和仿真设计。结合PIC方法,建立了利用该耦合器诊断TKA同轴漂移管内传输微波频谱特性的物理模型。通过仿真计算,验证了所设计的耦合器用于TKA自激振荡诊断的有效性。     

Numerical Analysis of Coupling between Two-Dimensional Conventional Dielectric Waveguides and Photonic Crystal Waveguide

A problem of coupling between conventional dielectric waveguides and a two-dimensional photonic crystal waveguide is analyzed, using the Fourier series expansion method combined with the absorbing boundary condition of a perfectly matched layer (PML). A novel structure for the input and output ends of the photonic crystal waveguide is proposed to increase the coupling efficiency. Numerical examples are demonstrated and discussed to validate the effectiveness of the proposed structure.