Comparison of two different electrophoretic methods in studying the genetic diversity among plantains (Musa spp.) using ISSR markers

Inter simple sequence repeat markers were employed for the genotyping of 16 plantain ecotypes. Two different electrophoretic systems namely conventional gel electrophoresis (CVGE) and fully automated high‐resolution CGE were used to evaluate the genetic diversity. Comparative analysis indicated that all parameters related to marker informativeness were higher in CGE except polymorphic information content. But genetic diversity parameters like effective number of alleles, Nei's gene diversity (1973) and Shannon's information index showed higher values (1.52 ± 0.12, 0.34 ± 0.05 and 0.52 ± 0.05, respectively) in CVGE as against CGE (1.29 ± 0.04, 0.22 ± 0.02 and 0.38 ± 0.03, respectively) system. The unweighed pair group method with arithmetic averages was used to obtain the dendrogram for both analyses. The results of dendrogram and principal component analysis were found to be consistent in both systems except for some minor disagreements. The clone‐specific bands could be used in the identification and development of SCAR markers. Inter simple sequence repeat markers used in this study provided sufficient polymorphism and reproducible banding pattern for evaluating the genetic diversity of different plantain ecotypes. Lack of accuracy and consistency of the CVGE warrants the employment of high‐throughput CGE for diversity analysis as it provided better separation of bands with higher resolution.     

原子量之"变"

原子量是最为基础的科学概念之一,"国际纯粹与应用化学联合会(IUPAC)"之"同位素丰度和原子量委员会(CIAAW)"每两年会修订并发布一次原子量。自2009年起,IUPAC宣布某些元素的原子量不再是常数,这些元素的标准原子量为区间值。为方便使用,对于这些元素,给出一个合理的单一数值,称为常规原子量。何为标准原子量?何为常规原子量?为何某些元素的原子量出现区间值?依据原子量数值的特性,元素可以分为几大类?本文在介绍最新元素周期表中原子量的特点之后,简述原子量测定、标准确定、概念演变的发展历史,讨论原子量的修订与变化等问题。     

Chiral geometry in multiple chiral doublet bands

The chiral geometry of multiple chiral doublet bands with identical configuration is discussed for different triaxial deformation parameters γ in the particle rotor model with πh_(11)/2γh_(11/2)~(-1).The energy spectra,electromagnetic transition probabilities B(M1) and B(E2),angular momenta,and K-distributions are studied.It is demonstrated that the chirality still remains not only in the yrast and yrare bands,but also in the two higher excited bands whenγ deviates from 30°.The chiral geometry relies significantly on γ,and the chiral geometry of the two higher excited partner bands is not as good as that of the yrast and yrare doublet bands.     

非傍轴矢量高斯光束的光强表示

 基于瑞利-索末菲衍射积分,未使用任何近似,对非傍轴矢量光束的两种光强表示式,即传统光强公式和时间平均坡印廷矢量的z分量进行了研究。对非傍轴矢量高斯光束详细数值计算结果的比较表明,两种表示式之间的差异,即两者的相对误差与束腰宽度及传输距离和波长的比值有关。对非傍轴矢量高斯光束,若传输距离与波长的比值为10,束腰宽度与波长的比值大于等于0.8,则最大相对误差不到1.5%。因此,传统光强公式是可用的。     

像素重要性测量特征下的侧扫声呐目标检测

研究了在较低信噪比下,在保证检测概率的前提下尽量降低虚警概率的目标检测,提出了一种针对特定目标的两阶段筛选算法.第一阶段中,首先使用阈值分割出有效点,并定义了一种新的像素重要性测量特征用于初步筛选目标。即通过有效像素点之间的距离来赋以高斯分布的权值,当前像素重要性的值定义为剩余有效点的距离加权和,具有较高的像素重要性值的聚集性强的区域内像素点会被定位出来。第二阶段,使用卷积神经网络分类器排除虚假目标.在实验中,使用近期无人潜器获得的海底数据,召回率与虚警概率分别达到90.39%与2.39%,证明了其相比声呐目标检测主流算法有更好的检测能力。     

应用半正定规划的目标方位超分辨方法

针对水下目标方位超分辨估计问题,提出了一种基于半正定规划(Sdp)的常规波束(CBF)方位超分辨算法(SdpCBF).Sdp-CBF算法基于常规波束形成获得多目标方位谱数据,利用阵列响应矩阵和半正定规划技术,精确估计目标数量和波达角方向.该算法的本质是利用阵列特性和信号能量信息获得超分辨方位估计,不用进行子空间分解,通过卷积反演的方式将阵列孔径的有限效应消除,在L₂范数约束条件下重构空间谱.仿真表明,Sdp-CBF算法具有较强的噪声抑制能力,对非相干和相干信号均具有目标方位超分辨能力,在低信噪比环境下的方位分辨性能超过多重信号分类(MUSIC)等经典高分辨算法。对消声水池以及湖上实验数据的处理结果显示,Sdp-CBF算法在复杂环境中对相干信号及微弱信号具有较强的分辨能力。     

岩体裂隙三轴应力渗透规律的试验研究

利用三轴应力渗透仪分别对煤矿底板的硬岩和软岩进行三轴应力渗透试验 ,观测渗水量、围压、轴压及水压的变化。     

Nanofluidic energy absorption system: A review

基于纳米流控行为设计的新一代能量吸收耗散系统（nanofluidic en-ergy absorption system,NEAS）将会比传统吸能材料具有更高的能量吸收密度,而且还可以重复使用,特别是在小体积应用环境下具有显著的优势.本文从实验和计算模拟两方面综述了目前关于NEAS能量吸收耗散行为的最新研究进展,其中实验研究主要包括准静态压缩和动态压缩测试,计算模拟研究主要是采用基于经验势的分子动力学模拟方法.通过准静态压缩实验,可以测量NEAS模型的载荷–位移关系曲线,从而获得NEAS模型的临界渗透压强,了解卸载后系统是否能够恢复到加载前的状态（即是否可以重复使用）,并通过载荷–位移关系曲线下面积估算NEAS模型的吸能密度;通过动态压缩实验可以测量NEAS模型对脉冲载荷的缓冲保护作用,主要体现为降低脉冲载荷幅值和扩展脉冲宽度.计算模型研究可以明确给出NEAS对外载荷的微观响应,从而可以准确了解NEAS的能量吸收耗散机制以及吸能密度的主要影响因素.本研究可以帮助我们全面了解NEAS的研究进展,为NEAS的设计与优化提供重要指导.     

常规压缩机混合工质循环气体液化系统研究

小型混合工质低温气体液化系统具有结构简单紧凑、尺寸小型化、投资省、易撬装化、易操作、应用灵活、安全性好等优点,其驱动采用全封闭油润滑压缩机,为常规制冷部件,制造工艺成熟,可市场化采购,成本大大降低。文中介绍搭建的常规压缩机驱动的混合工质低温气体液化实验台,进行了多次实验,并对系统的降温特性、能耗、压缩机性能等进行了测试。实验测试结果表明,常规油润滑压缩机性能稳定、耐用可靠,作为低温气体液化系统的驱动动力是可行的。     

Conventional true values compared

According to ISO/CD 18113-1:2005, the conventional true value of a control material can be an assigned value (obtained with a primary or reference measurement procedure), a consensus value or a procedure-defined value. The present study demonstrates that, for some biological quantities, the overall consensus value (“trimmed” mean value”) obtained in a proficiency testing program, which includes all results independently of the method of measurement, is not acceptable as a surrogate for a primary or reference method value. Therefore, for the biological quantities taken into account in this study, overall consensus value is not as good as primary or reference method value to estimate systematic error. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board and the Publisher. Apart from exceptional circumstances, they are not submitted to the usual referee procedure and go essentially unaltered.