Contact Angle Determined by Spontaneous Imbibition in Porous Media: Experiment and Theory

In this paper, a theoretical model was established to determine the contact angle by introducing a new defined effective capillary radius into the Lucas–Washburn equation. Based on the theoretical model, capillary rise experiments of water imbibed by different glass beads were carried out to measure the contact angle; the results were similar to the available data published in the literature. In addition, the model was modified to take account of the dynamic contact angle, according to the experimental data. The influence of the dynamic contact angle on the movement of the spontaneous imbibition was studied.     

Influence of Interfacial Tension on Seeded Calcium Carbonate Scale Precipitation: Effect of Adsorbed Asphaltenes

Clay particles with adsorbed asphaltenes, which are commonly found in produced water, have been used as seed particles during precipitation of calcium carbonate in order to determine whether such particles may influence the kinetics of precipitation. The results show that the presence of the adsorbed asphaltenes accelerates the precipitation, and there is also a significant difference between different types of adsorbed asphaltenes. The adsorption of asphaltenes at the seed surface leads to a significant increase in the interfacial tension between the seed surface and the aqueous solution, and calcium carbonate therefore precipitates at the seed surface in order to reduce this high interfacial tension.     

Noncommutative geometry and conformal geometry. III. Vafa–Witten inequality and Poincaré duality

This paper is the third part of a series of papers whose aim is to use the framework of twisted spectral triples to study conformal geometry from a noncommutative geometric viewpoint. In this paper we reformulate the inequality of Vafa–Witten [42] in the setting of twisted spectral triples. This involves a notion of Poincaré duality for twisted spectral triples. Our main results have various consequences. In particular, we obtain a version in conformal geometry of the original inequality of Vafa–Witten, in the sense of an explicit control of the Vafa–Witten bound under conformal changes of metrics. This result has several noncommutative manifestations for conformal deformations of ordinary spectral triples, spectral triples associated with conformal weights on noncommutative tori, and spectral triples associated with duals of torsion-free discrete cocompact subgroups satisfying the Baum–Connes conjecture.     

Simultaneous effect of carbon and water on NOx adsorption on a stabilized Pt–Ba/Al2O3 catalyst

The influence of the presence of H₂O on the contact between carbon, used as model soot, and a model four-way catalyst (1% Pt–10% BaO/Al₂O₃) was investigated. NO_x adsorption/TPD cycles at 300 °C together with XRD, XPS and DRIFTS characterizations showed that only surface nitrate species are destabilized by the carbon present in the catalytic bed, leading to a decrease of the NO_x storage capacity and carbonate species formation. In another way, injection of water in the reactive gas flow decreases also the NO_x storage capacity of the catalyst, but promotes the formation of stable nitrate species. A non-cumulative effect of carbon and water was observed. It was proposed that a competition between the destabilization, by carbon, of weakly bonded surface nitrate species and the enhancement of bulk nitrate species formation in the presence of water occurs.     

Photophysics of Fluorescent Contact Sensors Based on the Dicyanodihydrofuran Motif

Fluorescent molecular rotors have been used for measurements of local mobility on molecular length scales, for example to determine viscosity, and for the visualization of contact between two surfaces. In the present work, we deepen our insight into the excited-state deactivation kinetics and mechanics of dicyanodihydrofuran-based molecular rotors. We extend the scope of the use of this class of rotors for contact sensing with a red-shifted member of the family. This allows for contact detection with a range of excitation wavelengths up to ∼600 nm. Steady-state fluorescence shows that the fluorescence quantum yield of these rotors depends not only on the rigidity of their environment, but – under certain conditions – also on its polarity. While excited state decay via rotation about the exocyclic double bond is rapid in nonpolar solvents and twisting of a single bond allows for fast decay in polar solvents, the barriers for both processes are significant in solvents of intermediate polarity. This effect may also occur in other molecular rotors, and it should be considered when applying such molecules as local mobility probes.     

双分散颗粒体系在临界堵塞态的结构特征

堵塞行为是颗粒体系中一种常见的现象,其力学性质与堆积结构的关联非常复杂.本文采用离散元法研究了由两种不同半径颗粒组成的二维双分散无摩擦球形颗粒体系在临界堵塞态所呈现的结构特征,讨论了大小颗粒粒径比与大颗粒百分比对临界堵塞态的影响.数值模拟结果表明,当粒径比小于1.4时,临界平均接触数与大颗粒百分比关系不大,当粒径比大于1.4时随着大颗粒百分比的增大临界平均接触数先减小再增大.而临界体积分数在粒径比小于1.8时随着大颗粒百分比的增加先减小后增大,大于1.8时又基本不随大颗粒百分比而变化.大颗粒百分比在接近0或1时,系统近似为单分散体系,临界平均接触数与体积分数基本不随半径比的增大而变化;在接近0.5时,临界平均接触数随着半径比的增大逐渐减小,而临界体积分数则是先减小后增大.文中对大-小颗粒这一接触类型的百分比也进行了探讨,其值随着大颗粒百分比的增大呈二次函数的变化趋势,粒径比对这一变化趋势只有较小的影响.     

纳米表面相互作用及振动测头模型

如何实现高精度的测量是现代制造业及微电子技术领域的热点问题之一. 基于微纳米测头的三坐标测量机是当前实现高精度测量的重要手段. 随着测量尺寸的减小, 常用的纳米/微纳尺度的测头与待测表面之间形成静态接触, 其表面相互作用成为了影响其测量精度和可靠性的关键因素之一. 本文基于一种触发式振动测头, 研究了其动力学模型, 并通过对测头纳米尺度表面相互作用的理论分析及数值模拟, 确立了测头振动参数与表面相互作用之间的关联. 实验研究表明, 参数优化后的谐振微纳测头能有效抑制表面作用带来的干扰, 提高测量精度.     

Acceleration and mitigation of carrier‐induced degradation in p‐type multi‐crystalline silicon

Recently, a new carrier‐induced defect has been reported in multi‐crystalline silicon (mc‐Si), and has been shown to be particularly detrimental to the performance of passivated emitter and rear contact (PERC) cells. Under normal conditions, this defect can take years to fully form. This Letter reports on the accelerated formation and subsequent passivation of this carrier‐induced defect through the use of high illumination intensity and elevated temperatures resulting in passivation within minutes. The process was tested on industrial mc‐Si PERC solar cells, where degradation after a 100 hour stability test was suppressed to only 0.1% absolute compared to 2.1% for non‐treated cells. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Investigation of fill factor losses on 20.2% efficient n‐type mono‐like silicon solar cells with laser contact opening

Large area (243.36 cm²) back‐junction passivated emitter, rear totally diffused (PERT) solar cells with laser contact opening (LCO) on n‐type mono‐like crystalline Si with efficiencies of 20.2% are presented. Boron emitters with high electrical quality (implied open circuit voltage iV_OC up to 700 mV) are formed during a co‐diffusion step using SiO_x:B layers. Increasing the rear metal contact coverage, we observed a decrease in fill factor (FF) instead of the expected increase due to the decrease of the back side series resistance. We show that it can be attributed to recombination centers (RCs) in the space charge region underneath the contact spots inducing an increasing second diode contribution. The presented empirical model for the RCs implemented in Synopsys Sentaurus TCAD allows for a successful reproduction of the FF, pseudo FF and V_OC behaviour with contact coverage. According to this model, the RCs induced by laser ablation and subsequently evaporation of Al have a shallow exponential distribution with a characteristic length of L_T = 0.2 µm and an effective surface density of N *_T0 = 25 cm^–1. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

The Formation of Imidazolium Salt Intimate (Contact) Ion Pairs in Solution

1‐n‐Butyl‐2,3‐dimethylimidazolium (BMMI) ionic liquids (ILs) associated with different anions undergo H/D exchange preferentially at 2‐Me group of the imidazolium in deuterated solvents. This process is mainly related to the existence of ion pairs rather than the anion basicity. The H/D exchange occurs in solvents (CDCl₃ and MeCN for instance) in which intimate contact ion pairs are present and the anion possesses a labile H in its structure, such as hydrogen carbonate and prolinate. In D₂O, separated ion pairs are formed and the H/D exchange does not occur. A plausible catalytic cycle is that the IL behaves as a neutral base in the course of all H/D exchange processes. NMR experiments, density functional calculations, and molecular dynamics simulations corroborate these hypotheses.