Supramolecular Chemistry In Silico

Computational protocols capable of modelling supramolecular complexes have been evaluated. The complexation of cations by crown ethers and quaternary ammonium ions by an oxacalix[3]arene are presented as examples. In the latter case reliable qualitative results were obtained using the semi-empirical PM3 method where guest LUMO and electrostatic potential energies have been shown to correlate with experimental binding data. The optimal method for more accurate results combines semi-empirical equilibrium geometry and property calculations with single point energy calculations at the HF/6–31G* or BP/6–31G* quantum mechanical level.     

Oxidative addition transition states of Pd(0) complexes in polar solvent—a DFT study involving implicit and explicit solvation

Previous reports in the literature have suggested that concerted transition states for oxidative addition would not exist in solution. By contrast, this report describes the successful location of transition states for the oxidative addition of monoligated Pd(P^tBu₃), bisligated Pd(P^tBu₃)(MeCN), and anionic Pd(P^tBu₃)F^? complexes to C–Cl and C–OTf of an aryl chloro triflate in polar solvent (MeCN). Optimizations were done with implicit solvation and a combined implicit/explicit solvation approach in which six acetonitrile molecules were additionally involved in the optimization. The geometries obtained from optimizations employing an implicit solvation model are structurally largely analogous to those found using a combination of implicit and explicit solvation.     

CFD Simulation of Rheological Model Effect on Cuttings Transport

Foam, as a non-Newtonian fluid, plays an important role in the underbalanced drilling technique in oil field development. The rheological properties of drilling fluids, such as foam, have a direct effect on flow characteristics and hydraulic performance. Two rheological models—the Herschel–Bulkley model and power law—were fitted to two foam systems in this study. Computational fluid dynamics (CFD) was used to simulate the effect of the rheological models on solid–liquid (cuttings transport) hydraulics in concentric and eccentric annulus during the foam drilling operation. The simulation results are compared to the experimental data from previous studies. The results of CFD using the power law model are in good agreement with experimental results in horizontal annulus with respect to the Herschel–Bulkley model with relative error less than 8%. Thus, for CFD cuttings transport for simulations in inclined and horizontal annulus, it is best to use the power law's rheological model parameters.     

A Combined Spectroscopic and Theoretical Study on a Ruthenium Complex Featuring a π-Extended dppz Ligand for Light-Driven Accumulation of Multiple Reducing Equivalents

The design of photoactive systems capable of storing and relaying multiple electrons is highly demanded in the field of artificial photosynthesis, where transformations of interest rely on multielectronic redox processes. The photophysical properties of the ruthenium photosensitizer [(bpy)₂Ru( oxim-dppqp )]²⁺ ( Ru ), storing two electrons coupled to two protons on the π-extended oxim-dppqp ligand under light-driven conditions, are investigated by means of excitation wavelength-dependent resonance Raman and transient absorption spectroscopies, in combination with time-dependent density functional theory; the results are discussed in comparison to the parent [(bpy)₂Ru(dppz)]²⁺ and [(bpy)₂Ru( oxo-dppqp )]²⁺ complexes. In addition, this study provides in-depth insights on the impact of protonation or of accumulation of multiple reducing equivalents on the reactive excited states.     

Multicomponent synthesis,cytotoxicity, and computational studies of novel imidazopyridazine-based N-phenylbenzamides

A one-pot multicomponent synthesis and application of new imidazopyridazine based N-phenylbenzamides is described. An atom-economical method involving dimethyl phthalate, substituted anilines, and pyridazine-4,5-diamine provided the desired compounds in 120–150 min with 80–85% yield. The reaction was catalyzed with phosphoric acid, and glycerol was used as a safer, greener solvent. Anticancer evaluation against selected cancer cell lines revealed that compound 4e was the most active from the series and exhibited IC₅₀ values below 9.1 µM. Compounds 4h and 4d also displayed good and comparable IC₅₀ values (10.2–12.1 µM). Molecular docking and molecular dynamic studies showed that compound 4e exhibit good binding affinity and stable complex formation with ABL1-kinase protein, respectively. Additional computational predictions such as ADME and drug-likeness demonstrated the potential of the new benzamides as leads for further development.     

Effect of selected dopants on conductivity and moisture stability of Li3PS4 sulfide solid electrolyte: a first-principles study

The first principle computational screening was performed to investigate the effect of selected dopants for Li₃PS₄ sulfide solid electrolyte on its ionic conductivity and stability toward moisture. The results suggest that substitution P⁵⁺ using isovalent cations whose electronegativity (EN) value is closer to the value of S has more significant effects on the ionic conductivity, whereby W⁵⁺ and Sb⁵⁺ can improve most. Similarly, aliovalent cation substitutions with compensating changes in the lithium-ion concentration, particularly those with a lower oxidation state and higher EN, such as Cu²⁺, effectively enhance the lithium-ion conductivity in this structure. For cation dopants, it is found that ionic conductivity improvement of Li₃PS₄ is the synergetic effect of EN and oxidation number of the dopant as well as the material's lattice parameter change. Oxides of the considered cation dopants can also improve the ionic conductivity of the material but have much lower lithium-ion conductivity than the cases of cation dopants. However, the metal oxide dopants, particularly those derived from soft Lewis' acid cations, show a marginal improvement in moisture stability of the Li₃PS₄ electrolyte. The effect of halides and metal halide dopants on the lithium-ion conductivity and moisture stability of Li₃PS₄ electrolyte are also studied. It is found that metal halides are more effective than any other dopants in improving the ionic conductivity of Li₃PS₄.     

DFT study on the chemical sensitivity of C3N nanotubes toward acetone

Potential application of single-walled C₃N nanotubes was investigated as chemical sensors for acetone molecules based on the density functional theory calculations. It was found that the pristine nanotube weakly adsorbs an acetone molecule with the adsorption energy of − 9.7 kcal/mol, and its electronic properties are not sensitive to this molecule. By replacing a C atom with a Si atom, the nanotube becomes a p-type semiconductor. The adsorption energy of the acetone molecule on the Si-doped nanotube becomes much more negative (E_ad=−67.4 kcal/mol). The adsorption process leads to a sizable increase in the resistance of the Si-doped tube, thereby, it can show the presence of acetone molecule, creating an electronic signal. Also, the sensitivity of these devices can be controlled by the doping level of Si atoms. By increasing the number of dopant atoms from 1 to 4, the sensitivity is gradually increased.     

A regularised boundary element formulation for contactless SAR evaluations within homogeneous and inhomogeneous head phantoms

This work presents a Boundary Element Method (BEM) formulation for contactless electromagnetic field assessments. The new scheme is based on a regularised BEM approach that requires the use of electric measurements only. The regularisation is obtained by leveraging on an extension of Calderón techniques to rectangular systems leading to well-conditioned problems independent of the discretisation density. This enables the use of highly discretized Huygens surfaces that can be consequently placed very near to the radiating source. In addition, the new regularised scheme is hybridised with both surfacic homogeneous and volumetric inhomogeneous forward BEM solvers accelerated with fast matrix–vector multiplication schemes. This allows for rapid and effective dosimetric assessments and permits the use of inhomogeneous and realistic head phantoms. Numerical results corroborate the theory and confirms the practical effectiveness of all newly proposed formulations.     

熵驱大分子胶体粒子的柱状受限结晶

熵是物理化学的基本状态参量,在统计力学和热力学中处于核心位置.按照玻尔兹曼的微观解释,熵可以由孤立系统微观状态的数目(W)给出,即S=kBlnW,这里kB为玻尔兹曼常数[1,2].根据此公式,微观状态数越多,系统越混乱,熵越大,所以熵常被视作体系无序程度的度量.但熵增仅对应体系微观状态数的增加,与可观测的结构有序程度无关[3~5].在一些典型的软物质体系中,结构越有序熵反而越大,如胶体硬球在随机密堆积点的有序结晶[6]及描述各向异性棒状分子从各向同性相到向列相转变的Onsager原理[7].     

浅谈制药工程专业有机化学实验教学的心得和体会——以三苯甲醇的制备和重结晶实验为例

有机化学实验是制药工程专业的一门必修课,旨在训练学生有机合成基本实验技能。本文以三苯甲醇的制备和重结晶实验为例,讲述了笔者在多年教学中获得的一点感悟和经验:1)将实验步骤分解成片断讲解可以使学生更好地理解和记忆实验过程和操作目的;2)重要的基本操作应反复练习,即"学习、复习、提高",通过三次重复练习来实现巩固和熟练掌握该操作的目的。