负载型La0.8Sr0.2MnO3燃烧催化剂的载体效应

用浸渍法制备负载型Ｌａ_（０．８）Ｓｒ_（０．２）Ｍｎｏ_３燃烧催化剂,比较了γ－ＡＩ_２Ｏ_３、α－ＡＩ_２Ｏ_３、堇青石（２ＭｇＯ·２Ａｌ_２Ｏ_３、５ＳｉＯ_２）和ＺｒＯ_2四种载体的负载效果．用ＸＲＤ,ＤＰＲ着重研究了γ－Ａｌ_２Ｏ_３载体上由于负载量不同、焙烧温度不同引起的催化剂物相变化和二甲苯完全氧化的催化活性变化．     

推力轴承瞬态启动油膜热不稳定性的线性分析

以简化推力轴承为对象 ,理论上证明了推力轴承运行时存在热不稳定性 ,采用小扰动分析法得到了油膜温度的扰动方程 ,应用简正模态分析法推导了无量纲热不稳定性准则数以及推力轴承运行的热不稳定性准则 .     

扩散型气柱界面R-M失稳中混合率的实验研究

Richtmyer-Meshkov(R-M)不稳定性普遍存在于众多工程问题中,激波管实验是研究R-M失稳问题的主要手段.高精度的平面激光诱导荧光(planar laser-induced fluorescence,PLIF)技术具有分子量级的示踪能力,可获得界面气体浓度(摩尔分数)分布,为研究界面失稳混合问题提供了有力工具.在弱激波(Ma=1.25)冲击扩散型气柱界面实验中,采用PLIF技术对R-M失稳引起的SF6-Air界面混合问题进行了研究.通过改变椭圆形初始界面的长短轴比,得到了3种扩散型初始界面失稳演化过程中气体摩尔分数,观察到了斜压机制下界面的简单拉伸、二次不稳定性、挤压射流等现象.利用浓度分布进一步得到了界面的瞬时混合率,通过瞬时混合率、界面整体平均混合率以及混合率的概率密度分布,分析了界面在不同演化阶段的界面混合特征,初步讨论了界面失稳混合的机制.演化初期,界面在斜压涡的作用下发生拉伸卷曲,通过增大浓度梯度来促进界面的混合.当演化进一步发展,二次不稳定性出现后,界面通过小尺度对流的方式达到湍流混合状态,而浓度梯度驱使的分子间混合逐渐减弱.由浓度梯度引起的扩散与由二次不稳定性引起的对流存在着"竞争"关系,二者共同主导了界面的混合.     

运动状态下液体轴对称抛撒首次破碎的实验研究

在实验室条件下利用组合式激波管设备,对运动状态下液体轴对称抛撒进行了实验研究。通过纹影装置获得其所形成雾化场的外形轮廓照片,测量获得了液核发生首次破碎的位置与对称轴之间的距离。通过对抛撒过程中R-T不稳定性与K-H不稳定性的分析认为,轴向气流作用下液体轴对称抛撒的首次破碎点与对称轴的距离主要由轴向气流的速度、轴向气流的密度、液体轴对称抛撒的出口速度、抛撒液体的表面张力系数、环形喷口的宽度等参数所决定。在此基础上,利用相似性理论和无量纲分析,获得了运动状态下液体轴对称抛撒首次破碎点与对称轴之间的距离与相关参数的无量纲关系式。     

Competition between fingers in Hele-Shaw flows

In experiments on the displacement of viscous fluids in a Hele-Shaw cell of channel type the catastrophic development of competition between fingers is sometimes observed: for a long time two fingers propagate almost side by side and then one of them suddenly suppresses the other. It is believed that this is a manifestation of the capillary forces on the phase interface [1]. Using the solution found in [2] for the problem in an idealized formulation, it is shown that this scenario is perfectly feasible without having to take capillary forces into account.     

基于离轴积分腔输出光谱的燃烧场CO浓度测量研究

CO是碳氢燃料不完全燃烧的重要产物,常常被作为反应燃烧效率的标志物,燃烧场CO组分浓度的精确测量对提高燃烧效率、减少污染物排放具有重要意义。离轴积分腔输出光谱(OA-ICOS)是一种利用物质对激光的特异性吸收,实现对该物质分析和测量的技术,具有非接触、稳定和高灵敏度等优点。针对燃烧场CO浓度低,背景信号干扰强等特点,采用分布反馈式(DFB)激光器搭建基于离轴积分腔输出光谱的CO浓度测量系统,通过直接吸收光谱的测量方法实现对高温燃烧场CO浓度测量。利用仿真模拟的方法,在所用激光器中心波长的附近选出了常温下谱线强度较为突出,高温下不受其他燃烧产物干扰的第一泛频带R(10)吸收谱线。通过固定光程池对比吸光度的方法标定了OA-ICOS系统的有效光程;通过比较不同扫描频率下吸收谱线的信噪比和线型拟合残差标准差,得到最佳波长扫描频率;通过测量不同浓度CO混合气体的吸收信号分析了系统误差。探究了不同燃烧情况下CH₄/Air预混平焰炉上CO的产生情况,根据燃烧场测量区域温度分布情况描述了温度分布不确定度对CO测量结果的影响。当量比为1.0时,在10 ms的测量时间分辨率下,噪声等...     

求解层间界面反平面剪切破坏的剪切梁模型(Ⅰ)——基本特性

在反平面剪切载荷及侧压力共同作用下引起的裂纹及裂纹扩展导致的层间界面失效,是岩土工程层间界面及砌体结构中界面层上典型的失效方式.运用弹性力学和断裂力学的理论原理,提出了能够反映上述层间界面断裂失效问题力学特性的剪切梁模型.文中采用具有应力软化特性的“粘性裂纹”(内聚力裂纹)模型来表述层间裂纹前方损伤过程区的本构行为.对通过粘性层结合在一起的两个弹性板,在反平面剪切载荷及侧压力共同作用下的力学行为作了解析分析计算,研究了层间界面裂纹扩展规律.     

Surface Tension Effect on Harmonics of Rayleigh-Taylor Instability

Using the method of the parameter expansion up to the third order, explicitly investigates surface tension effect on harmonics at weakly nonlinear stage in Rayleigh-Taylor instability (RTI) for arbitrary Atwood numbers and compares the results with those of classical RTI within the framework of the third-order weakly nonlinear theory. It is found that surface tension strongly reduces the linear growth rate of time, resulting in mild growth of the amplitude of the fundamental mode, and changes amplitudes of the second and third harmonics, as is expressed as a tension factor coupling in amplitudes of the harmonics. On the one hand, surface tension can either decrease or increase the space amplitude; on the other hand, surface tension can also change their phases for some conditions which are explicitly determined.     

Characterization and photoluminescence properties of some MLn2(1−x)O4:2xEu or 2xTb systems (M=Ba or Sr, Ln=Gd or La)

BaGd₂O₄, BaLa₂O₄ and SrLa₂O₄ powders doped with different concentrations of Eu³⁺ or Tb³⁺ are prepared by combustion synthesis method and the samples were further heated to 500, 700 and 900 °C to improve the crystallinity of the materials. The structure and morphology of materials have been examined by X-ray diffraction and scanning electron microscopy. It is remarkable that all the samples of BaGd₂O₄, BaLa₂O₄ and SrLa₂O₄ have similar morphology. The SEM images show homogeneous aggregates of varying shapes and sizes, which are composed of a large number of small elliptical shaped crystallites with an average diameter of about 0.5-3.0 μm. Photoluminescence for all materials increases with increase of temperature and shows a maximum for the samples heated to 900 °C with 4 mole% doping of Eu³⁺ or Tb³⁺ ions. The luminescence is almost same for all powders when doped with same concentration of Eu³⁺.     

Instability of the finite‐difference split‐step method applied to the generalized nonlinear Schrödinger equation. III. external potential and oscillating pulse solutions

This is the final part of a series of articles where we have studied numerical instability (NI) of localized solutions of the generalized nonlinear Schrödinger equation (gNLS). It extends our earlier studies of this topic in two ways. First, it examines differences in the development of the NI between the case of the purely cubic NLS and the case where the gNLS has an external bounded potential. Second, it investigates how the NI is affected by the oscillatory dynamics of the simulated pulse. The latter situation is common when the initial condition is not an exact stationary soliton. We have found that in this case, the NI may remain weak when the time step exceeds the threshold quite significantly. This means that the corresponding numerical solution, while formally numerically unstable, can remain sufficiently accurate over long times, because the numerical noise will stay small. © 2016 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 33: 633–650, 2017