负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO₂负载型催化剂,并将其用于CO₂加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%（质量百分数）时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO₂的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

PEG接枝氧化石墨烯的制备与细胞成像

通过酯化反应将不同分子量的聚乙二醇（PEG）接枝到氧化石墨烯（GO）表面,得到系列GO-PEG。利用傅里叶变换红外光谱（FTIR）、拉曼光谱（Raman）、扫描电子显微镜（SEM）对GO-PEG的结构和形貌进行了表征,用热重分析（TGA）测定了GO-PEG中PEG的接枝量。SEM结果表明GO-PEG的剥离程度高于GO。GO-PEG在磷酸盐缓冲溶液中具有良好的分散稳定性,稳定性与接枝量呈正相关。GO-PEG通过非共价键合作用对荧光素（Flu）的负载量可达1.75mg·mg^-1,且负载量受接枝量影响;另外,GO-PEG对Flu的释放行为具有pH值触发药物释放性能。将接枝PEG的端羟基与Flu共价键合,所得GO-PEG₆₀₀₀-Flu荧光探针实现了对HepG₂细胞的成像。     

复合还原剂硼氢化钠/三氯化铁对亚砜的还原

硼氢化钠是一种温和、高选择性的亲核还原剂。一般它只能还原醛、酮和酰氯,而对其它功能团不起作用。因而其应用范围有一定的限制。据文献报道,某些金属卤化物能有效地提高硼氢化钠的还原性能^[1]。复合还原剂硼氢化钠/三氯化铁已应用于将β-二烷基氨基共轭烯酮还原为相应的饱和γ-氨基醇^[2]。本文研究了硼氢化钠/三氯化铁对亚砜的还原反应。     

Analysis of alkaloids in Macleaya cordata (Willd.) R. Br. using high-performance liquid chromatography with diode array detection and electrospray ionization mass spectrometry

A method for the analysis of alkaloids in Macleaya cordata (Willd.) R. Br. using high-performance liquid chromatography with diode array detection and electrospray ionization mass spectrometry (HPLC-DAD-ESI/MS) was developed. Using protopine (PRO), allocryptopine (ALL), sanguinarine (SA), and chelerythrine (CHE) as the model components, different columns for the separation and different mobile phases for the signal intensities of alkaloids in ESI/MS were investigated, respectively. The results showed that good separation and high signal intensities can be obtained on a high carbon loading (17%) reversed-phase C(18) column with 30 mM formic acid in mobile phase for the analysis of alkaloids. Under the optimal separation condition and UV detection (284 nm), linearity of the six alkaloids was obtained over concentration range from 0.05 to 100.00 microg/ml. The limit of detection (LOD) was 1.62, 1.87, 1.79, 1.76, 1.10, and 0.94 ng/ml for SA, CHE, PRO, ALL, dihydrosanguinarine (DHSA), and dihydrochelerythrine (DHCHE), respectively. The LODs with ESI/MS detection were lower three orders of magnitude than those obtained with UV detection. The proposed method could be used to control quality of the raw materials of the herb more comprehensively.     

Ag负载TiO2纳米管微波辅助水热法制备及其光催化性能

以微波辅助水热法制备了二氧化钛纳米管,然后通过浸渍法在其表面负载了银纳米颗粒.所得样品用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、氮吸附、X射线光电子能谱(XPS)、紫外-可见漫反射等测试方法表征.微波加热处理可以大大缩短反应时间,产物为无定型纳米管,经高温焙烧后转变成锐钛矿型二氧化钛.所得纳米管的外径为7-8 nm,内径为5-6 nm,管长约200 nm,比表面积可达371 m2·g-1.负载的银分散在纳米管的表面,对纳米管的结构与晶型没有影响,但是拓宽了二氧化钛的光吸收范围,使吸收边红移至可见光区,并且有效抑制了光生电子空穴的复合.在可见光降解罗丹明B的实验过程中,与Ag负载的P25及纯二氧化钛纳米管相比,Ag负载二氧化钛纳米管具有更高的可见光催化活性,并且当Ag/Ti 物质的量的比为0.5%时,可见光催化性能最好.     

T形型钢混凝土柱正截面承载力的计算方法探讨

在总结了型钢混凝土(SRC)柱承载力计算一般方法的基础上,针对T形型钢混凝土柱, 结合中国现行规范,分析了此种柱的受力特点和破坏模式,提出T形型钢混凝土柱正截面极 限承载力的计算方法,并采用该方法对一T形型钢混凝土柱的承载力进行验算. 结果表明与 试验数据吻合较好,说明本文方法具有较好的精确度和适用性.     

光通量法在SHPSB剪切应变测量中的应用

利用光通量方法对分离式霍普金森压剪杆实验技术中的剪切应变测量进行了实验研究。实验装 置主要包括:准直激光器、光电接收器、光学挡板。由装置性能验证实验结果以及不确定度分析结果表明:利 用基于光通量法的剪切应变测量技术能够可靠地测量SHPSB(splitHopkinsonpressurebar)试样的剪切应 变。并对比了基于光通量法测量的剪切应变值与理论近似结果,结果显示前者小于后者,分析并讨论了原因。     

红宝石脉冲激光动态光力学方法研究与进展

本文提出了瞬态图像采集技术和电磁脉冲加载装置。应用红宝石脉冲激光光源,介绍了动态全息光弹性、动态散斑干涉、动态云纹干涉、水下爆炸全息干涉、动态电子散斑干涉和动态数字散斑相关等多种方法的测试原理和测试技术。为动态位移场、应变场和应力场的定量分析提供了广泛的应用前景。     

Third body modeling in fretting using the combined finite-discrete element method

A new approach was developed for modeling the effect of the third body on fretting. This was accomplished using the combined finite-discrete element method (FDEM) in which the third body is analyzed as discrete elements while the first bodies are modeled using finite elements. This approach provides a link between large scale models which treat the mass of wear debris as a single or small number of bodies and small scale models which only study a control volume. The FDEM was used to analyze the behavior of third body particles between flat sliding surfaces. When the third body mass is composed of unconnected particles, it behaves as a Newtonian fluid, but this behavior ceases when the particles are connected into platelets. The FDEM was also used to study the behavior of third body particles inside a Hertzian line contact. As the number of particles and platelet size increase the load carried by the worn slip zone grows larger in relationship to the unworn stick zone.     

不同倾角预制裂纹缺陷与运动裂纹的相互作用

为了研究运动裂纹与不同倾角预制裂纹缺陷之间的作用机制,采用数字激光动态焦散线方法对含不同倾角预制裂纹缺陷的三点弯曲梁进行冲击实验。研究结果表明,在冲击载荷作用下,预制裂纹缺陷尖端均产生了次生裂纹;当运动主裂纹与预制裂纹缺陷贯通时,次生裂纹不会立即起裂,而是经过0~10 μs的能量积蓄后,次生裂纹才起裂;运动主裂纹应力强度因子峰值与次裂纹起裂时的应力强度因子值均随预制裂纹倾角的增大而增大。