共价氢化物与汞离子反应的研究：Ⅱ.痕量硒的高灵敏分析新方法

本文详细研究了硒化氢与汞离子反应条件并建立了氢化物发生－冷原子荧光法间接测定痕量硒的新方法。考察了各种实验条件，并将此方法用于合成水样分析，得到一些有意义的结果。     

Measurements of velocity distributions in the deformation zone in cold rolling by a scanning LDV

Experimental determination of the velocity distribution in the deformation zone is of significant importance to investigate the metal flow in both conventional and asymmetrical rolling processes. In this paper, a scanning laser Doppler velocimetry (LDV) system, designed for measuring the velocity distributions in the deformation zone in plate rolling is reported. The LDV used for the rolling process is briefly described and then the scanning mechanism based on beam displacement by a rotating transparent plate is introduced. The relationship among the scanning distance, the beam-cross angle of the LDV system and the rotating angle of the plate is established. The scanning LDV was first tested with a rotating disk and then applied in the rolling process. The test results have demonstrated the feasibility of the scanning LDV.     

Analysis of triglycerides by capillary gas chromatography with programmed-temperature injection

The capillary gas chromatographic analysis of complex naturally occurring and food-product triglyceride mixtures is accomplished qualitatively and quantitatively on columns coated with methyl and methyl-phenyl (65%) silicones using programmed-temperature split/splitless and on-column injection. Faster analysis times are achieved using elevated initial column oven temperatures with cold initial injector temperatures.     

An MSFIA system for mercury speciation based on an anion-exchange membrane

A new methodology for the in-line preconcentration, clean-up and speciation of mercury by use of an anion-exchange membrane is proposed. The speciation of mercury is based on retention of its tetrachloro complex onto the membrane while organic mercury flows freely through it. A multisyringe is used as a liquid driver and a cold vapour atomic fluorescence detector is employed to ensure a high sensitivity. Organic mercury is decomposed into to inorganic mercury by using a UV lamp. The carrier and reductant streams consist of 1.5% (m/v) hydrochloric acid and 2% (m/v) tin chloride, respectively. Certified reference material DORM-2 was digested with 37% hydrochloric acid and analysed directly without the need for extraction. The proposed system is more environmental friendly than the classical liquid-liquid extraction procedure. Mercury recoveries from spiked samples and the reference material were all close to 100%. An LOD of 14 and 16 ng/L was obtained for total and organic mercury, respectively, both with an RSD less than 1.3%.     

越南火龙果冷藏现状分析

随着全球化经济的快速发展,食品冷藏技术日益重要.文中综述了越南火龙果的现有冷藏技术及其存在的问题,并提出解决方案.     

冷绝缘高温超导电缆绝缘设计的研究

目前随着国内外高压输电系统的不断发展,许多研究机构一直试图开发高电压等级的高温超导电缆系统,这就要求设计的HTS电缆要有可靠的绝缘性能和优化的绝缘设计技术.根据超导电缆的结构特点和高温超导电缆系统的运行特点,对Nomex和PPLP进行了交流耐压、雷电冲击、局部放电(PD)起始电压和热循环等高压绝缘特性试验.根据不同厚度...     

Characterization of laser sealed coatings of yttria partially stabilized zirconia

The present paper reports an experimental investigation based on X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and wavelength dispersive spectroscopy (WDS) analyses of phases formed after laser sealing of plasma sprayed coatings of 8.5 wt% yttria partially stabilized zirconia (YPSZ). X-ray diffraction and X-ray step-scanning analyses showed that the plasma sprayed and sealed coatings consisted mainly of t′ phase with a very small amount of monoclinic phase (m phase) in the plasma sprayed coatings. It was also found that the small amounts of m and cubic phases (c phase) present in the sealed coatings were dependent on laser processing specific energies (specific energy is equal to laser power/traverse speed x beam diameter). It was also found that rhombohedral (r) phase formed after laser sealing of coatings at higher specific energies. A direct relationship between c/a ratio of transformable tetragonal phase (t phase) produced by thermal treatment of sealed coatings and nontransformable tetragonal phase (t′ phase) and the amount of Yttria was obtained. A new equation was derived, which describes the relationship between Yttria concentration and the c/a ratio of tetragonal phases (t or t′).     

Wear resistance of reactive plasma sprayed and laser remelted TiB2-TiC0.3N0.7 based composite coatings against medium carbon steel

Wear resistance of reactive plasma sprayed TiB₂-TiC_0.3N_0.7 based composite coatings and the as-sprayed coating with laser surface treatment was investigated using plate-on-plate tests. Wear tests were performed at different normal loads and sliding speeds under dry sliding conditions in air. The surface morphologies of counterparts against as-sprayed and laser remelted coatings were investigated. The microstructure and chemical composition of wear debris and coatings were studied using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), respectively. The results show that the wear resistance of the laser remelted coating is improved significantly due to their increased microhardness and reduced flaws. The primary wear mechanism of the remelted coating is oxidation wear and its minor wear mechanisms are grain abrasion and fatigue failure during the course of wear test. In contrast, the primary wear mechanism of the as-sprayed coating is grain abrasion at the low sliding speed (370 rpm) and fatigue failure at the high sliding speed (549 rpm). The oxidation wear mechanism is a minor contributor for the as-sprayed coating.     

The effect of heat treatment on the electrochemical corrosion behavior of reactive plasma-sprayed TiN coatings

The effect of heat treatment on the corrosion behavior of reactive plasma sprayed TiN coatings in simulated seawater was investigated by electrochemical methods such as the corrosion potential-time curve (E_corr − t), potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and SEM, etc. The results showed that the corrosion potential of TiN coatings increased after heat treatment; the corrosion current of the TiN coatings after heat treatment (be hereafter referred to as HT-TiN) was 13.3% of the untreated coatings (be hereafter referred to as UT-TiN), and the polarization resistance of HT-TiN was 20 times of UT-TiN, which indicated that the heat treatment had significantly increased the corrosion resistance of the coatings. The corrosion behavior of the coatings was mainly local corrosion, and the local corrosion behavior mainly took place at the microdefects (crack and pores) of the coatings. The porosity of the coatings was reduced after heat treatment. The reason was that TiN reacted with O₂ to form TiO₂ and Ti₃O during the heat treating, and volume expansion took place, which led to denser microstructure. The corrosion resistance of the coatings was therefore increased.